Abralon

Mirka Abralon Ø 77mm 3
Mirka
£20.59
Mirka Abralon Foam Disc/Pads Ø 77mm 2000 GritAbralon is a unique multifunctional patented sanding material developed for the flexible sanding of both smooth and profiled surfaces.Abralon creates a smooth sanding pattern on angled surfaces and edges, while minimizing the risk of pressure marks. Abralon is especially suitable for use in the automotive and marine industries. The flexible weave allows water and air to pass freely, making the product suitable for both dry and wet sanding, either by machine or hand. Abralon is also suitable for the finishing and pre-polishing of gelcoat, SMC, glass reinforced plastic (GRP), lacquers, etc.Technical Specifications:Bonding: Special resinGrain: Silicon carbideCoating: Special ABRALON methodColour: GreyGrit: 2000Backing: Knitted fabric on foamQuantity: Box of 20 PadsSuited For: Automotive RefinishingConstruction & DecorationWood ProcessingMetal ProcessingComposites ProcessingMarine IndustryVehicles ManufacturingSuitable MaterialsAluminiumHard woodMild steel / carbon steelNon-ferrous metalPaint sandingGlass fibreSolid surfaceStainless steelSteelCopper alloys / brass / bronzeLacquersPlasticsPrimerBody filler
Mirka Abralon Discs - 150mm - P3000 (20)
Mirka
£39.99
Mirka Abralon Disc 150mm - P600 - Pack 20 Mirka Abralon Discs are an exceptional, multifunctional patented sanding material with a hook and eye backing. Use Mirka Abralon for flexible sanding of both smooth and profiled surfaces. To reduce the risk of pressure marks, Mirka Abralon creates a smooth sanding pattern on angled surfaces and edges. Recommended for use in the automotive, wood finishing and marine industries, the supple weave of Mirka Abralon allows water and air to pass freely, allowing this product suitable for both dry and wet sanding, either by machine or hand. Mirka Abralon is also recommended for the finishing and pre-polishing of gelcoat, SMC, glass reinforced plastic (GRP) and lacquers, etc. Please note: Coarser grits are recommended for surface preparation of composite body parts and fine sanding of the body surfaces before primer and top lacquer applications. Finer grits are suitable for smoothing of primers and bottom lacquers and the preparation of surfaces between blending. The sanding of pot marked surfaces and the preparation of the top coat prior to polishing. Technical Specification: Grain: Silicon carbide, Bonding: Special Resin, Backing: Knitted fabric on foam, Coating: Special ABRALON method, Colour: Grey, Pack 20 Grit Range: P500, 600, 1000, 2000, 3000 and 4000. Mirka has been a leading manufacturer and supplier of abrasives to the wood and furniture industry for over three decades, as well as the automotive industry. Specialising in coated, non-woven, dust-free sanding products for surface finishing.
Abralon Mirka 150mm 6
Mirka
£5.84
Mirka Abralon Foam Disc/Pads 150mm P180 Grit to P4000 GritAbralon is a unique multifunctional patented sanding material developed for the flexible sanding of both smooth and profiled surfaces.Abralon creates a smooth sanding pattern on angled surfaces and edges, while minimizing the risk of pressure marks. Abralon is especially suitable for use in the automotive and marine industries. The flexible weave allows water and air to pass freely, making the product suitable for both dry and wet sanding, either by machine or hand. Abralon is also suitable for the finishing and pre-polishing of gelcoat, SMC, glass reinforced plastic (GRP), lacquers, etc.Technical Specifications:Bonding: Special resinGrain: Silicon carbideCoating: Special ABRALON® methodColour: GreyGrits Available: P180P360P500P600P1000P20003000P4000Backing: Knitted fabric on foamSuited For: Automotive RefinishingConstruction & DecorationWood ProcessingMetal ProcessingComposites ProcessingMarine IndustryVehicles ManufacturingSuitable MaterialsAluminiumHard woodMild steel / carbon steelNon-ferrous metalPaint sandingGlass fibreSolid surfaceStainless steelSteelCopper alloys / brass / bronzeLacquersPlasticsPrimerBody fillerQuantities Available:Single2 Discs5Discs10 Discs
Mirka 8A-240-3000 Abralon Foam Grip Disc, 6 by Mirka
Mirka
£80.06
Combines benefits of abrasive cloth and non-woven products, Constructed of fabric face, foam center and a grip backing, Abrasive grains are bonded evenly to the fabric face, Open cell design holds large amounts of water or solvent for lubrication and cooling
Mirka Abralon Discs - 150mm - P2000 (20)
Mirka
£39.20
Mirka Abralon Disc 150mm - P2000 - Pack 20 Mirka Abralon Discs are an exceptional, multifunctional patented sanding material with a hook and eye backing. Use Mirka Abralon for flexible sanding of both smooth and profiled surfaces. To reduce the risk of pressure marks, Mirka Abralon creates a smooth sanding pattern on angled surfaces and edges. Recommended for use in the automotive, wood finishing and marine industries, the supple weave of Mirka Abralon allows water and air to pass freely, allowing this product suitable for both dry and wet sanding, either by machine or hand. Mirka Abralon is also recommended for the finishing and pre-polishing of gelcoat, SMC, glass reinforced plastic (GRP) and lacquers, etc. Please note: Coarser grits are recommended for surface preparation of composite body parts and fine sanding of the body surfaces before primer and top lacquer applications. Finer grits are suitable for smoothing of primers and bottom lacquers and the preparation of surfaces between blending. The sanding of pot marked surfaces and the preparation of the top coat prior to polishing. Technical Specification: Grain: Silicon carbide, Bonding: Special Resin, Backing: Knitted fabric on foam, Coating: Special ABRALON method, Colour: Grey, Pack 20 Grit Range: P500, 600, 1000, 2000, 3000 and 4000. Mirka has been a leading manufacturer and supplier of abrasives to the wood and furniture industry for over three decades, as well as the automotive industry. Specialising in coated, non-woven, dust-free sanding products for surface finishing.
ABRALON-disque 2000 mIRKA ø 77 mm
MIRKA
£41.39
Areas of applicationAbralon is made from a sanding Net, The foam centre and the back with a Velcro Backing. Thanks to innovative mesh structure can water and air focus moves freely around the abrasive grains, so with Abralon is nearly dust-free sanding. Typical areas of application include high gloss varnish, mineral materials and gel coats. Technical SpecificationBinder Special plasticGrit type - Silicon CarbideDispersion - Special Abralon® methodColour: GreyGrains - 2000Backing Material - Fabric on foam Materials Aluminium Hardwood Soft steel/carbon Non-ferrous metals Lacquer sanding Varnishes Plastic Fountain pen Primer Mineral fibreboard Stainless Steel Steel Copper Alloys/Brass/Bronze Fibre Optic Main uses Automotive repair Paint & Drywall. Wood Metal Plastic Marine industry. Automotive industry
Mirka Abralon Ø 77mm 3
Mirka
£21.95
Mirka Abralon Foam Disc/Pads Ø 77mm 1000 GritAbralon is a unique multifunctional patented sanding material developed for the flexible sanding of both smooth and profiled surfaces. Abralon creates a smooth sanding pattern on angled surfaces and edges, while minimizing the risk of pressure marks. Abralon is especially suitable for use in the automotive and marine industries. The flexible weave allows water and air to pass freely, making the product suitable for both dry and wet sanding, either by machine or hand. Abralon is also suitable for the finishing and pre-polishing of gelcoat, SMC, glass reinforced plastic (GRP), lacquers, etc.Technical Specifications:Bonding: Special resinGrain: Silicon carbideCoating: Special ABRALON methodColour: GreyGrit: 1000Backing: Knitted fabric on foamQuantity: Box of 20 PadsSuited For: Automotive RefinishingConstruction & DecorationWood ProcessingMetal ProcessingComposites ProcessingMarine IndustryVehicles ManufacturingSuitable MaterialsAluminiumHard woodMild steel / carbon steelNon-ferrous metalPaint sandingGlass fibreSolid surfaceStainless steelSteelCopper alloys / brass / bronzeLacquersPlasticsPrimerBody filler
Mirka Abralon 8A-241-4000B 4000 Grit Silicon Carbide Sanding Pads, 25-Pack by Mirka
Mirka
£145.47
Is perfect for sanding/polishing fine woodworking, bowling balls, and marine vessels; Openings in fabric allow water and solvent and air to flow freely around the abrasive; Combines benefits of abrasive cloth and non-woven products; Constructed with a fabric face, foam center, and a grip backing; Works especially when well sanding contoured surfaces, corners and sharp edges.
Mirka Abralon 8A-241-4000B 4000 Grit Silicon Carbide Sanding Pads, by Mirka
Mirka
£25.00
Is perfect for sanding/polishing fine woodworking, bowling balls, and marine vessels;Hook and loop design;For solid surface sanding;Silicon carbide;Special Abralon method coating
Mirka 8A24102051, abralon grip 500, 150 mm, 20 per pack
MIRKA
£39.99
Mirka Abralon Unperforated Disc Grip K500 ø 150 mm (20 pc.)
Storm Fever Pitch Bowling Ball- Orange Pearl 14lbs
Storm Bowling
£142.70
The Storm Fever Pitch carries on the successful line of Pitch bowling balls in the Storm line up. The Fever Pitch does not react as early as the Pitch Black ball but it corners better than the Pitch Blue bowling ball. Storm is introducing a new weight block and coverstock with the Fever Pitch. The Tour Block core is wrapped with the PWR+CTRL Pearl Urethane coverstock to create a ball that is better on shorter oil patterns and drier lane conditions.
Soft Sanding Pad for Random Orbital Sander 5/16
DFS
£26.50
Sanding Pad for Random Orbital Sander 5/16" Threadsuitable for all Electro- and Air Sanders 5/16" Thread (7,9mm) for Hook and Loop sanding discs soft Ø 150mm 35-Holes for dust extraction NEW - Industry quality - Made in Germany
Mirka Abralon Ø 77mm 3
Mirka
£20.95
Mirka Abralon Foam Disc/Pads Ø 77mm 3000 GritAbralon is a unique multifunctional patented sanding material developed for the flexible sanding of both smooth and profiled surfaces.Abralon creates a smooth sanding pattern on angled surfaces and edges, while minimizing the risk of pressure marks. Abralon is especially suitable for use in the automotive and marine industries. The flexible weave allows water and air to pass freely, making the product suitable for both dry and wet sanding, either by machine or hand. Abralon is also suitable for the finishing and pre-polishing of gelcoat, SMC, glass reinforced plastic (GRP), lacquers, etc.Technical Specifications:Bonding: Special resinGrain: Silicon carbideCoating: Special ABRALON methodColour: GreyGrit: 3000Backing: Knitted fabric on foamQuantity: Box of 20 PadsSuited For: Automotive RefinishingConstruction & DecorationWood ProcessingMetal ProcessingComposites ProcessingMarine IndustryVehicles ManufacturingSuitable MaterialsAluminiumHard woodMild steel / carbon steelNon-ferrous metalPaint sandingGlass fibreSolid surfaceStainless steelSteelCopper alloys / brass / bronzeLacquersPlasticsPrimerBody filler