Acousti

NEW! Acousti Anti Vibration Silicone Washers Black 8 Pack
Acousti
£2.28
Super-soft silicone washersExcellent for reducing vibrational fan, drive and PSU noiseGreat value fo
NEW! Acousti Anti Vibration Silicone Washers Clear 8 Pack
Acousti
£2.29
Although many PC components create noise in themselves, this can be made much worse when components are installed into a PC case, and their noise can become amplified by vibration of the metal onto which the component is mounted. These soft silicone general-purpose washers seek to reduce or eliminate this vibration effect, which often manifests itself as a deep, annoying rumbling sound
Acousti AFM02B Ultra-Soft Fan Mounts 26mm 8 pack - for 2 fans
Acousti
£4.51
See also: AFM03B Easy-Fit Fan Mounts Why are Fan Mounts Necessary? Vibration from fan motors can travel into a PC case and become amplified when a fan is fitted tightly. This unwanted 'vibrational' noise is an issue if you wish to build a very quiet or virtually silent PC. These mounts have been designed 'from the drawing-board' specifically to tackle fan-induced vibrational noise! Acousti Ultra-Soft Fan Mounts are a 'no-vibration' alternative to standard fan screws or hard plastic push pins. To prevent the transmission of vibrations from a motor (such as a fan motor), the vibrating part needs to be decoupled (or disengaged) from the case, and the vibrations need to be damped, that is, attenuated. Acousti Products have selected an ultra-soft silicone polymer that effectively decouples the fan and also attenuates unwanted vibration. Both the shape and materials have been designed together to give a widely compatible fan mount. These mounts are made from an ultra-soft silicone polymer because it is softer and more chemically stable than cheaper alternatives like rubber or EPDM. Ultra-soft silicone is non-toxic, more chemically stable, and can also tolerate higher temperatures - so it is a superior material for this application. AFM02B - Acousti Ultra-Soft Fan Mounts are available in both Retail Packs of 8 mounts (shown), and packs of 100 mounts in bulk (enough for 25 fans) for OEM and system builders. Compatibility Please note that this product is only compatible with flange type fans. This is because flange type fans (shown below) do not have a 'tunnel' connecting the mounting holes like Rib type fans. Flange type design is the most popular type of fan moulding used in PCs & servers. For rib-type fans, we recommend gaskets rather than fan mounts, which will give equally good performance. Fitting Instructions
Acousti AFG70B Anti-vibration 70mm Fan Gasket
Acousti
£4.87
Advantages •Help to absorb the vibration that otherwise would be transmitted from the fan into the case chassis and case housing. •Help to 'seal' the small gap between the fan and the casing/enclosure wall. This improves the efficiency of the fan, by reducing feedback airflow and therefore air pressure losses. Other advantages include: •Compatible with virtually all case cooling fans •Supplied with screws and silicone washers •Quick and very easy to fit (these gaskets 'hold onto' the fan whilst fitting them due to a small lip in the gasket design) Technical Spec •Operating Temperature: (-)20 - (+)70°C •Softness: Shore A 40 +/-5 •Material: Translucent Silicon Rubber •Gasket Thickness: 2.5mm •Recommended Compression: 5% of height
Acousti AcoustiFeet Anti-vibration Case Feet Soft : ACF3007-20B
Acousti
£5.95
Anti-vibration Replacement Soft Feet (Pack of 4)A great deal of PC case feet are solid plastic, or (
Acousti 80mm Anti-vibration Silicone Fan Dampener (Gasket) : AFG80B
Acousti
£6.69
See also: Fan Gasket bulk OEM packs These super-soft silicone fan gaskets are designed to dramatically reduce the vibration from any PC or server case cooling fans. The 60 and 70mm gaskets are 1.5mm thick, and the larger sizes are 2.5mm thick. Included with each gasket are silicone washers and anti-vibration screws. These screws feature a thread design which prevents the shank touching the fan and vibrations being transmitted and amplified through to the chassis. These gaskets are suitable for the vast majority of case designs and fan combinations, as they fit standard fan mounting holes. Slightly lengthened (12mm thread) fan mounting screws are supplied with the fan gaskets and washers. These gaskets can be used with standard PC cooling fans, and not just with AcoustiFan quiet case fans. Note: Do not use these gaskets in very high temperature locations inside a PC/Server such as attached to CPU or GPU heat sinks! Fitting instructions Fit the fan gasket onto the outside of the fan housing (it will stay on the fan) Position the fan and gasket together against the inside of the case, so that the four mounting holes in the fan and gasket line up to the mounting holes in the case side Locate the four silicone washers and screws, and fit the washers against the case side, each secured by a screw Tighten the screws enough to very slightly compress the silicone rubber. Do not overtighten.
AFM03B Ultra-Soft Arrowhead Fan Mounts, qty 8 (2 fans)
Acousti
£5.70
Why are Fan Mounts Necessary?Vibration from fan motors can travel into a PC case and become amplifie
Session Acousti #1
Bam Library
£3.49
Belmont Boulevard
Import
£11.59
Advanced Acoustics 1
Advanced Acoustics
£10.50
Each 1" Acousti-Slab is 610mm (24in) by 1220mm (48in) and are sold individually. The panels are plain faced which means the panels have good even thickness which results in there is more foam per panel compared to profiled tiles of the same thickness. This extra amount of foam results in improved absorption and overall better results. The Acousti-Slab is designed to allow you to make up your own fabric covered acoustic panels instead of using Rockwool or Mineral Wool which can be irritating to use due to escaping fibres. With acoustic foam there are no escaping fibres and so is perfectly safe to use. One panel covers an area of 0.72 m2 (8 ft2). The acoustic panels are available in dark grey only. The foam has a density of 32kg/m3 and a hardness of 180 Newton. The NRC of the 1" Acousti-Slab Acoustic Panel is 0.55. We only use professional grade open cell acoustic foam. We specialize and are dedicated in selling only acoustic foam products. You will not find us selling other products such as upholstery foam or packaging foam, foams which are not suitable for acoustic applications. All of our products meet the requirements of schedule 1, part 1 the Furniture and Furnishings (fire) (safety) Regulations 1988 (amended 1989). This Furniture and Furnishings is a more stringent test then the FMVSS302 which other companies advertise. The FMVSS302 is an automotive fire classification and products which only conform to this classification are not suitable for use in domestic or commercial applications. Our products are totally safe and suitable for use in both domestic and commercial applications. PLEASE NOTE: Items sold by Efoam are not genuine Advanced Acoustics products and are not sold with our permission.
AGIRL Beautiful Guitar Various Vector Guitars Picnic Mat 57''x79''(140cmx200cm) Picnic Blanket Beach Mat With Waterproof For Kids Picnic Beaches And Outdoor Folded Bag
AGIRL
£26.00
*Easy to clean:Not washable.Wipe the waterproof backing with a towel and shake off mulch, sand, grass, or dirt on the surface.*Multiple uses: picnic blanket can be used as a beach blanket, beach mat, camping blanket, RV blanket, emergency blanket or throw blanket. Not just outdoor blanket, it also serves as floor mat, kids playing mat as well as pet seat cover, definitely a great item for every family.
Advanced Acoustics 3
Advanced Acoustics
£31.50
Each 3" Acousti-Slab is 610mm (24in) by 1220mm (48in) and are sold individually. The panels are plain faced which means the panels have good even thickness which results in there is more foam per panel compared to profiled tiles of the same thickness. This extra amount of foam results in improved absorption and overall better results. The Acousti-Slab is designed to allow you to make up your own fabric covered acoustic panels instead of using Rockwool or Mineral Wool which can be irritating to use due to escaping fibres. With acoustic foam there are no escaping fibres and so is perfectly safe to use. One panel covers an area of 0.72 m2 (8 ft2). The acoustic panels are available in dark grey only. These thicker panels result in more absorption along a wider range of frequencies especially at the mid range where acoustic tiles have to work hardest to give you a room that has greater balance and control. The thicker tiles also mean that you don't need as much of it because it is more effective than thinner acoustic tiles. The foam has a density of 32kg/m3 and a hardness of 180 Newton. The NRC of the 3" Acousti-Slab Acoustic Panel is 1.00.We specialize and are dedicated in selling only acoustic foam products. You will not find us selling other products such as upholstery foam or packaging foam, foams which are not suitable for acoustic applications.All of our products meet the requirements of schedule 1, part 1 the Furniture and Furnishings (fire) (safety) Regulations 1988 (amended 1989). This Furniture and Furnishings is a more stringent test then the FMVSS302 which other companies advertise. The FMVSS302 is an automotive fire classification and products which only conform to this classification are not suitable for use in domestic or commercial applications. PLEASE NOTE: Items sold by Efoam are not genuine Advanced Acoustics products and are not sold with our permission.
Union DoorSense Acoustic Release Device - White
Union
£99.16
UNION DoorSense is a standalone unit which can be fixed to a fire door in seconds to provide a reliable way to keep it open but will automatically release if the fire alarm sounds. DoorSense is incredibly easy to install, needing no wiring or special skills, it can even use the same footprint as some older units. Once fitted, DoorSense is powered by two Alkaline C batteries for long working life, and has a low battery indicator to help you keep the unit in excellent working order. Once in place you can have it working manually or automatically via a timer to set a night release time. DoorSense is available in three colours: black, red or white, and comes supplied with full fitting and setup instructions along with batteries for instant start up. Suitable for use with fire rated doors using door closers with a power rating between 3-7. Compliant with BS EN 1155. EMC Tested and rated for timber doors (FD120) 1 x UNION DoorSense Acoustic Release Device - WhitePTDUNNJ8755AW
NEW! Acousti AcoustiPack Ultimate 3 Layer Material Sheets Kit
Acousti
Scan Computers Product Feed for Google Shopping