Adams Rite

Adams Rite 7100 Release 12vDC F/U
Adams Rite
£170.97
Flat faceplate - to suit single leaf aluminium doors. 12vDC/24vDC are continuously rated. DC releases are reversible fail locked/fail unlocked. Short faceplate to suit aluminium frame. Medium duty. Holding Force: 907Kg/2000lbs Current: 12vAC = 1.48A, 12vDC = 0.332A and 24vDC = 0.19A
Adams Rite MS1848-11 Deadlock Self Latch
Adams Rite
£16.48
The Adams Rite MS 1848 Deadlock & accessories are designed to fit within very narrow stile sliding door stiles without compromising the high degree of security needed by these doors. Available in both deadlocking and self latching versions. Can be operated from either side by any standard bored type cylinder (ref 8426) or 1000 series turn. Strike plate sold separately. Suitable for use on aluminium and timber doors. Bolt can be adjusted by 4.5mm to compensate for door and frame mis-alignment. Adjustability: A full 4.6mm lengthening or shortening of bolt projection can be made by turning an exposed screw in the face of the lock. This can compensate for a considerable misalignment between door and jamb. Anti-Lifting: The 3 ply laminated stainless steel hookbolt is designed to withstand approximately ton of the force vertically or horizontally, thus protecting against jamb/door. Self latching version has spring-loaded hookbolt which will retract immediately on contact with strike to prevent damage.
Adams Rite 451035201628 4510-35-201-628 Dead latch, LH or RHR, 1-1/8, 2-2/3 L by Adams Rite
Adams Rite ASSA ABLOY
£83.39
Operation: Turn key or operate handle to retract spring-loaded latch bolt. To hold bolt retracted, push it in and secure by reverse turn of key Uses any standard mortise cylinder with MS Case is steel with corrosion-resistant plating. 1" x 5-13/16" x 1-1/8" Latch bolt is 1/2" x 1" x 1/2" throw. All metal with hardened steel internal pins. Handing is reversible without special tools Auxiliary bolt is all metal. Deadlocks latch bolt to prevent "loiding" or case-knife entry Standard strike furnished is 4902-01 for flat jamb where door closes flush or nearly flush for single doors Individually boxed with strike and machine screws for mounting Finish: Clear Anodized 628 Cylinder and/or thumbturn available separately
Adams Rite Style Door Lock Mortise Hook Deadbolt & Cylinder Combo, Adams Rite Cam, in Duronotic (31/32
ilco
£46.82
Steel or Aluminum Frame Entry Door Mortise Deadbolt Lock Set- Huge five-ply laminated steel bolt with concealed hardened steel pin provides maximum security. Designed for aluminum or steel framed storefront entry doors. Specifications: Backset: 31/32", 1-1/8" . Face Plate: Width - 1", Length - 6-7/8"Case Dimensions: Width - 7/8", Length - 6", Depth (specific to backset) - 1.63" through 1.78"Deadbolt: Width - 5/8", Throw - 1-3/8"Mortise Deadbolt Dimensions. Includes cylinder set screws, trim, and mounting screws. NOTE: IF YOUR LOCK CYLINDER IS NOT THREADING IN, TRY LOOSENING THE LOCK BODY MOUNTING SCREWS.
Pacific Doorware Storefront Door Keyed Mortise Lock Cylinder Adams Rite Cam in Dark Bronze
ilco
£8.39
Mortise Cylinder in Dark Bronze features a 5 pin Schlage "C" keyway. Threaded to screw into mortise lock body. Features a Standard 1-5/32-Inch Diameter and 1-inch length. The lock cylinders have adams rite cam for use with Kawneer, Adams Rite, and most other storefront locks. NOTE: IF YOUR LOCK IS NOT THREADING IN, TRY LOOSENING THE LOCK BODY MOUNTING SCREWS.
Storefront Door Mortise Lock Cylinder & Thumbturn, Adams Rite Cam, in Aluminum
Adams Rite
£22.01
Mortise Cylinder in Aluminum features a 5 pin Schlage "C" keyway. Threaded to screw into mortise lock body. Features a Standard 1-5/32-Inch Diameter and 1-inch length. The lock cylinders have adams rite cam for use with Kawneer, Adams Rite, and most other storefront locks. NOTE: IF YOUR LOCK IS NOT THREADING IN, TRY LOOSENING THE LOCK BODY MOUNTING SCREWS.
ADAMS RITE Shine Digital Glass Door Lock
Adams Rite
£372.04
The Adams Rite Shine.99 digital door lock is a stylish and robust access solution for glass door entrances, making it ideal for use in small to medium businesses and office. The clip style attachment makes for easy installation as no drilling is required
Adams Rite Hookbolt MS2200 30mm
Adams Rite
£16.00
All faceplates and strikeplates must be ordered separately. Monitored cases (hookbolt only) available to order. Hookbolt is suitable for sliding doors. Easily converted to 2/3 point locking by using 4022-18 header and threshold bolt.(To order only). Dead/hook bolt can be operated from either side by key or thumbturn using any standard euro profile double cylinder or cylinder and turn. Please note that backset measurements are as supplied by Adams Rite which include a faceplate which is not supplied with the lock. Please deduct 4mm from quoted backsets for actual backset of the lock as supplied.
Storefront Door Mortise Lock Hook Deadbolt & Cylinder Combo, Adams Rite Cam, in Aluminum (1-1/8 BACKSET)
Adams Rite
£47.40
Steel or Aluminum Frame Entry Door Mortise Deadbolt Lock Set- Huge five-ply laminated steel bolt with concealed hardened steel pin provides maximum security. Designed for aluminum or steel framed storefront entry doors. Specifications: Backset: 31/32", 1-1/8" . Face Plate: Width - 1", Length - 6-7/8"Case Dimensions: Width - 7/8", Length - 6", Depth (specific to backset) - 1.63" through 1.78"Deadbolt: Width - 5/8", Throw - 1-3/8"Mortise Deadbolt Dimensions. Includes cylinder set screws, trim, and mounting screws. NOTE: IF YOUR LOCK CYLINDER IS NOT THREADING IN, TRY LOOSENING THE LOCK BODY MOUNTING SCREWS.
Storefront Door Mortise Lock Cylinder & Thumbturn, Adams Rite Cam, in Duronotic
ilco
£21.85
Mortise Cylinder in Aluminum features a 5 pin Schlage "C" keyway. Threaded to screw into mortise lock body. Features a Standard 1-5/32-Inch Diameter and 1-inch length. The lock cylinders have adams rite cam for use with Kawneer, Adams Rite, and most other storefront locks. NOTE: IF YOUR LOCK IS NOT THREADING IN, TRY LOOSENING THE LOCK BODY MOUNTING SCREWS.
Adams Rite 4710 Deadlatch 28mm
Adams Rite
£78.07
Latch is automatically deadlocked when door is in the closed position. All faceplates and strikeplates must be ordered separately. Reversible latchbolt withdrawn from either side by key or turn using any standard screw-in cylinder or thumbturn (with cam), or 4591 paddle handle (with 4580 cam plug). Also range of lever handles available to suit. To operate hold back facility, push in bolt and secure by reverse turn of the key. Please note that backset measurements are as supplied by Adams Rite which include a faceplate which is not supplied with the lock. Please deduct 4mm from quoted backsets for actual backset of the lock as supplied.
Adams Rite Sentinel 6 Lock 40mm
Adams Rite
£35.20
Sentinel 6 is a completely new generation of deadlock from Adams Rite that raises the bar in security locking to new heights. Engineered specifically to meet the stringent BS EN 12209 Lock Standard Test to security Grade 6, Sentinel 6 stands in a class of its own. Bolt withstands 10kN side load in unsupported application and 6kN end load. Barbolt with anti-spread feature incorporating the benefits of hookbolt. New patented Adams Rite over-centre mechanism. Enclosed mechanism prevents potential for tampering while under attack. Specifically designed to fit into thermally broken and shopfront applications. Aiding in compliance with current door set standards. Will retro-fit into existing prep for MS2200.
Prime-Line Products 152469 Sliding Door Mortise Lock, Round Face, Adams Rite
Prime-Line Products
£6.66
This mortise lock is constructed from steel. The keyway rests in a vertical position when the hook is fully extended. It features adjustable hook projection. This style mortise lock fits on Adams Rite sliding doors.
ADAMS RITE Shine Strike To Suit the Shine Digital Glass Door Lock
Adams Rite
£69.44
Matching strike to suit Adams Rite Shine.99 motorised digital lock to allow use on double doors. The clip style attachment makes for easy installation as no drilling is required. Suitable for use on glass double doors with a thickness of 10-12mm.
Prime-Line Products 1521-1 Adams Rite Face Round Mortice Sliding Door Lock
Prime-Line Products
£17.16
This key of patio door lock is constructed from steel. It has a adjustable hook, round end tray. The Groove is based in 45 degree position with the hook when fully expanded. This style has been used on Adams Rite doors. From the ManufacturerThis into the patio door lock is constructed from steel. It has a adjustable hook, round end tray. The Groove is based in 45 degree position with the hook when fully expanded. This style has been used on Adams Rite doors.
Prime-Line Products 151291 Square Face Adams Rite Sliding Door Mortise Lock
Prime-Line Products
£17.26
This sliding door mortise lock is constructed from steel. It features a steel housing and hook with adjustable projection and a square end face plate . This type of lock is used by Adams Rite.
Prime-Line Products E 2119 Mortise Lock, Auto Latch, Round Face, Steel, Adams Rite
Prime-Line Products
£11.16
Mortise Lock, 45 ¡ Slot, Auto Lock, Round Face
Prime-Line Products E 2121 Sliding Door Mortise Lock, Round Face, Adams Rite by Prime-Line Products
Prime-Line Products
£16.28
Steel construction; Mortise installation with round end face plate; Adjustable hook projection; Used on Adams Rite patio doors