Adhesive Dispensing Ltd

Adhesive Dispensing Ltd - 50ml 1:1/2:1 Ratio Manual Dual Cartridge Applicator Gun
Chemtech
£18.61
Applicator gun for adhesives which are supplied in two part, side-by-side syringe cartridges that push the adhesive through a static mixing nozzle. The lightweight portability and durable construction of the manual guns make them well suited for many assembly operations in various markets such as aerospace, electronics, construction and automotive. This version is 50ml size for use with 1:1 and 2:1 ratio cartridges only. High quality robust device with lever to pull back the plunger rod when the cartridge is empty. The item supplied is for the applicator gun only - does not include adhesive, empty cartridges or mixer nozzles. These items can be ordered separately.
Adhesive Dispensing Ltd - 50ml 10:1 Ratio Corian Manual Dual Cartridge Applicator Gun Oval
Chemtech
£29.82
Manual twin cartridge gun 10:1 ratio. Suitable for use with 50ml rounded dual cartridges. For adhesives which are supplied in two part, side-by-side syringe cartridges and push the adhesive through a static mixing nozzle. The lightweight portability and durable construction of the manual guns make them well suited for many assembly operations in various markets such as aerospace, electronics, construction and automotive. Manual guns in this range are available in two sizes with four mix ratios (1:1, 2:1, 4:1 and 10:1). This version applicator gun is 50ml 10:1 ratio only. Use with the oval rounded shaped end 50ml dual cartridges as below. Part ID: ABM-25M10 Materials: Nylon, Polypropylene, Polyethylene Colour: Grey/ Black Size: 50ml Length: 260mm (including push rod) Height: 135mm Warranty: 1 Year This version gun is suitable only for the top rounded cartridge style (top). For the bottom style square cartridge, order ABM-25M10 gun.
Adhesive Dispensing Ltd - 23 gauge 0.50
Techcon
£12.00
Precision luer lock dispensing neede tip with 1/2" long stainless steel tube. The SE needle series are stainless steel shafts with a luer lock polypropylene hub. This line of dispensing needles is burr-free, and electro-polished shaft for unobstructed and consistent material flow. In addition they are silicone free. Designed to dispense most viscosity fluids and adhesives. These tips are epoxy bonded from shaft to hub and are supplied at an economical price. Tips are colour coded for gauge size. The tip features a tapered internal design where the shaft meets the hub to improve fluid flow and reduce any restriction. This allows for a lower pressure to be used for dispensing liquids and pastes. Material: Polypropylene/ Stainless Steel Colour: Orange Hub ID: 0.013" - 0.330 mm OD: 0.025" - 0.64 mm Tube Length: 0.50" - 12.50 mm Details: Industrial grade, Silicone Free
Adhesive Dispensing Ltd - Superglue Debonder/ Remover 50ml Bottle
Protac
£8.34
Adhesive DeBonder. Ideal for fast and easy removal of surplus cyanoacrylate adhesive or un-sticking of fingers (not eyes or mouth). Non flammable. Supplied in a convenient to use 50ml size bottle. UK sales only.
Adhesive Dispensing Ltd - Cyanoacrylate Thin Grade 50G Bottle
ADL
£8.94
High quality blended cyanoacrylate adhesive surface insensitive fast cure. Produces rapid bond between a variety of materials including plastics, rubbers, metals, paper, card and leather. This grade is suitable for bonding difficult substrates, absorbent and porous surfaces, e.g. paper, wood, cardboard and leather as well as superfast cure with plastics, metals, ceramics, and rubbers. Due to the surface insensitive nature of GB06, this grade also maintains a rapid fixture time on acidic surfaces such as wood, leather and dichromated metals. GB06 is used in a wide cross section of industrial applications including automotive, white goods and furniture manufacturing. Typical examples include bonding centre consoles, dashboards and weather stripping, bonding identification tags to equipment, bonding rubber pads to equipment base or legs, bonding components in a loud speaker cone, bonding leather and rubber during shoe manufacture, bonding fabric on lampshades. Part ID: GB06 Material: Ethyl Bottle Size: 50 gram Colour: Clear Viscosity: 20 cps Max Gap Fill: 0.101mm Temp. Range: -55 to 82°C Fixture Time: < 5seconds @ 20°C Typical Strength: 5 to 28 N/mm2
Adhesive Dispensing Ltd - 200ml/400ml Mutli Ratio Manual Gun
Newborn
£70.27
For epoxies, adhesives and other materials that are supplied in 200ml or 400ml dual side-by-side 1:1, 2:1, 4:1 and 10:1 ratio cartridges with the use of a static mixing nozzle. The lightweight and durable construction of these dual guns make them well suited for many assembly operations in various markets such as aerospace, electronics, construction and automotive. This is a lightweight hand trigger operated cartridge gun supplied with parts to handle a variety of cartridge ratio's. The BG Series guns are covered by a 1 year warranty and feature a wear compensating device.
Adhesive Dispensing Ltd - 20ml (3/4oz) LDPE PolySpence Bottle/ Tip Kit
Fisnar
£5.50
LDPE squeeze type PolySpense Needle-Bottles, feature a unique Luer lock cap that accommodates all Fisnar blunt end or plastic taper tip needles. Available in 3/4, 1, 2 and 4 oz sizes, PolySpense Needle-Bottles are ideal for dispensing alcohols, cleaning agents, flux, Cyanoacrylates, adhesives, solder mask, and other materials. Needle-Bottle kits include: LDPE bottle, cap-seal with luer lock thread and 5 pieces of 27 Gauge 1.0 inch (25.4mm) long precision needles. 20ml (20cc) or 3/4 oz capacity Low density polyethylene body/ PE cap Natural colour body/ white cap Silicone-free plastics 15-415 Thread
Adhesive Dispensing Ltd - Epoxy Resin 5 min Cure Multi Purpose Adhesive Kit 50ml
ADL
£35.00
Twinpack 50ml Rigid 5 Minute Cure Epoxy Multi Purpose Adhesive Gun Kit. Includes the follow parts: - 1 x 50ml Epoxy Cartridge, 1 x 50ml Applicator Gun, 10 x 50ml Mini Mixing Nozzles, 3 x Nozzle to Tip Adapters, 10 x Assorted Precision Tips. The adhesive is a 2-part, room temperature curing, rigid bonding epoxy adhesive resin 1:1 ratio by volume, that can be used for multiple applications. Quick Set - 3 Minute Work Time - 5 Minute Cure - Durable Rigid Bonding System. Perfect for bonding Metals to Metals, & Metals to Plastic and other substrates. The applicator gun allows fine control over the cartridge when applying precision amounts. Part ID: 6000-50K Material: epoxyadhesive Colour: Clear Pack Size: 50ml Dual Cartridge 1:1 Applications: Use with plastics and metals Open Time (at 23°C): 3 minutes CureTime: 5 minutes Shelf Life: 12 months (Storage at 5 C) Do not freeze this product, keep away from direct sunlight.
Adhesive Dispensing Ltd - Sealant Cartridge to Nozzle Adapter Fitting TSD931-296
ADL
£10.38
This versatile adapter converts any 310ml sealant and silicone type cartridge for use with nozzles or luer lock fittings. It threads over the 310ml cartridge tube end to provide a 1/4" NPT internal nozzle thread. A high density reusable nylon adapter fitting that is used on pre-filled 310ml (1/10 gallon) size caulking tube cartridges that feature an external threaded nipple that is usually cut to accept a nozzle. This adapter fitting attaches to this thread and allows for any of our dispensing nozzles to be used. This part is ONLY for use with pre-filled sealant type cartridges and will adapt these for use with our whole range of nozzles and fittings. Use with part TSD931-15 for syringe filling. This allows for a direct syringe attachment for transfer of liquid from 310ml cartridge to syringe. Or use with part TSD931-7 for direct attachment of smaller precision dispensing tips. This fitting converts any 310ml cartridge external thread to a 1/4" NPT female thread. A robust part that can be cleaned and re-used or sealed off tight when on the cartridge using a cap to protect against air curing.
Adhesive Dispensing Ltd - 3.4oz High Density Touch-Pump Bottle pk/1
ADL
£4.50
DipitTM Touch-Pump Bottles provide an economic, clean and safe method of conveniently presenting a small reservoir of solvent, cleaner or alcohol. Fluid-ready for dipping a brush or wipe for an assembly, production or laboratory purpose. Ideal for PCB soldering operations and clean rooms. Prevents wasteful evaporation & contamination. Stainless steel lid and pump components for long life. Price is per bottle. Supplied in a sealed bag. 100ml (3.4oz) High density PE Stainless steel lid
Adhesive Dispensing Ltd - 10cc Manual SyringeGun Part TS710SG
ADL
£27.74
Syringe Gun dispensers are designed for the controlled application of pastes, gels, adhesives and fluids. A cost effective quality made syringe dispensing gun for use with standard 10cc/ 10ml size syringe barrels. Ideal for low volume production, out in the field, re-work or repair work. Syringeguns offer a low cost dispensing solution for most medium to high viscosity pastes, gels, silicones, greases and other liquids. A portable and lightweight manual dispenser for applying most fluids. A 7:1 ratio leverage for effortless trigger movement. The rod moves 3mm (1/8") once pressed to provide repeat deposits without drips or ooze. Push the button to release plunger rod. Simple bayonet twist on/ twist off barrel attachment. Ideal for applying solder paste, solder flux, RTV, silicones, sealants, gels, greases, compounds, PVA glues and many other liquids/ pastes. Each Syringe Gun includes the 10ml manual hand gun, (1) dispensing reservoir with piston, (1) storage end and tip caps, (1) dispensing tip. Barrels are attached to the syringe gun using wide flanges. This ensures the barrel does not break under constant use or hand pressure. This 10ml gun is also available conveniently supplied complete with our full component kit. Materials: Polypro/ Nylon Capacity: 10cc or 10ml Length: 175mm Height: 135mm Weight: 110 grams Colour: Red Handle/ White Trigger Warranty: 1 Year
Adhesive Dispensing Ltd - Female Luer to Female Luer Clear Polypro Straight pack/10
ADL
£11.40
A plastic fitting for attaching a syringe direct to another syringe for direct fluid transfer. The female luer attaches to the tip end of both syringe barrels. Works with any luer lock barrels. If used for transfer of liquids from larger cartridges to syringes, please use this part with fitting TSD931-7 white fitting. Bottom filling syringes will reduce air entrapment Safe for use up to 100 psi fluid pressure. Ships direct from stock in sealed packs.
Adhesive Dispensing Ltd - 2oz Bottle with Luer Lock Cap pack/10
ADL
£11.43
Premium squeeze bottle with luer lock on top of screw-cap to attach any dispense tip. For precise drops of flux, solder mask, adhesives, silicones, glues, liquids and oils. Great for dispensing flux for PCB's Also suitable for applying most low to medium viscosity fluids, adhesives, primers, henna inks, PVA glues and coatings.The luer lock cap allows the use of any standard tips, tapered tips and can also be used with a brush tip for coating or spreading fluids. Bottles are supplied in sealed packs of 10. For more viscous pastes, gels, epoxies and compounds, please use our syringe guns. Bottles are also available supplied with a selection of dispensing tips and tip caps.10 (ten) bottles and luer caps are supplied in each bag ordered. Available direct from stock. This bottle designis a boston round style in low density soft plastic.
Adhesive Dispensing Ltd - Orange Threaded Tip Cap pack/50
ADL
£7.80
Orange coloured flat plastic tip cap seal for use with all barrels, cartridge fittings, bottles and other components. Provides an air tight seal. Especially suitable to use when filling a syringe or bottle with watery liquids. Also when storing filled syringes and bottles. Edge grip for easy removal. Double helix locking thread for very secure attachment. Flat allows syringe to stand upright. Silicone free safe. Suitable for use on luer lock barrels or fittings. Supplied in a pack of 50 caps. Material: Polypropylene Colour: Orange Length: 18mm Outer Diameter: 18mm Details: Silicone free
Adhesive Dispensing Ltd - 16 Gauge Taper Tip Grey pack/50
Techcon
£12.00
High quality, smooth flow tapered dispensing tip for controlled application of pastes, silicones, sealants, RTV's, epoxies, grease and other medium to high viscosity fluids. Double helix locking thread for safety, coloured plastic for UV protection. Grey colour. 0.048" - 1.222mm ID. Safe for use up to 100 psi. Silicone free plastics. This tip features a smooth flowing taper design that allows for very high viscosity pastes and compounds to be dispensed with lower pressures required. Suitable for use with syringe barrels, cartridges (using TSD931-7 adapter) and with all metering valves. Material: Polyethylene Colour: Grey ID: 0.048" - 1.222 mm Length: 1.25" - 31.75 mm Details: Industrial grade, Silicone Free
Adhesive Dispensing Ltd - 50ml 1:1 Ratio Manual Dual Cartridge Applicator Gun
Chemtech
£18.61
For adhesives which are supplied in two part, side-by-side syringe cartridges and push the adhesive through a static mixing nozzle. The lightweight portability and durable construction of the manual guns make them well suited for many assembly operations in various markets such as aerospace, electronics, construction and automotive. Manual guns in this range are available in two sizes with four mix ratios (1:1, 2:1, 4:1 and 10:1). This version is 50ml size with a 1:1 ratio only.
Adhesive Dispensing Ltd - 20 Gauge Taper Tip Pink
Techcon
£12.00
High quality, smooth flow tapered dispensing tip for controlled application of pastes, silicones, sealants, RTV's, epoxies, grease and other medium to high viscosity fluids. Double helix locking thread for safety, coloured plastic for UV protection. Pink colour. 0.024" - 0.610mm ID. Safe for use up to 100 psi. Silicone free plastics. This tip features a smooth flowing taper design that allows for very high viscosity pastes and compounds to be dispensed with lower pressures required. Suitable for use with syringe barrels, cartridges (using TSD931-7 adapter) and with all metering valves. Material: Polyethylene Colour: Pink ID: 0.024" - 0.610 mm Length: 1.25" - 31.75 mm Details: Industrial grade, Silicone Free
Adhesive Dispensing Ltd - Tip Kit Assortment in Case
Techcon
£35.00
A useful tip selection kit containing 145 assorted needle tips from our precision TE range (0.5" long), a selection of 45° and 90° bend angled tips, all size tapered tips and sample tip caps. Dual level plastic box with info card for easy product identification. All tips feature double helix locking thread for safety and are safe to use to 100 psi. Hubs are colour filtered plastic for UV protection. All components are silicone and chloride free. Ships from UK direct from stock
Adhesive Dispensing Ltd - 2ml Luer Slip Graduated Syringe Assembly pk/50
BD
£8.50
Manual syringe barrel assembly. Natural (clear) graduated for use with all adhesives. Luer slip for push on attachment of needle tips. Includes clear plastic syringe barrel, plastic plunger rod and rubber piston. These syringes are industry compliant polypropylene. Supplied in a sealed pack of syringe barrels, pistons and rods. Suited for use with most glues, fluids, adhesives, solvents, primers, inks, paints, lubricants and activators. Ideal for craft, repair, jewellery making, bling, glitter glues, henna tattoo and other applications. Clear syringe with graduated markings along the outer wall.
Adhesive Dispensing Ltd - Male Luer to 1/4
ADL
£14.32
Male luer lock fitting to 1/4" NPT thread. Natural polypropylene. Suitable for use with valves and tubing and compatible with most adhesives, solvents, inks, gels, chemicals, silicones, primers and activators. Supplied in a pack of 5 or in bulk value packs of 100. Use as a tip adapter fitting on metering valves TS941 and TS941A as well as with all cartridges and other fittings. Used with part TSD931-28N for syringe filling. All fittings are 100% silicone free plastics and are safe for use to 100 psi pressure. This fitting is also available in white polypropylene or black polypropylene.