Advanced Acoustics

Advanced Acoustics Acoustic Treatment 15
Advanced Acoustics
£35.30
One pack of tiles contains 24 tiles which are sized 381mm (15in) by 381mm (15in). The tiles are wedge profile which offers a greater surface area over flat tiles which enables them to 'catch' sound waves more easily and effectively. One pack covers an area of 3.48 m2 (37.5 ft2). The acoustic tiles are available in dark grey only. The tiles have a peak thickness of 40mm and are 20mm at the base which makes them effective for reducing reverberations and echoes in the room. The foam has a density of 32kg/m3 and a hardness of 180 Newton. The NRC of the Wedge Standard Acoustic Tiles is 0.60. We only use professional grade open cell acoustic foam. We specialize and are dedicated in selling only acoustic foam products. You will not find us selling other products such as upholstery foam or packaging foam, foams which are not suitable for acoustic applications. All of our products meet the requirements of schedule 1, part 1 the Furniture and Furnishings (fire) (safety) Regulations 1988 (amended 1989). This Furniture and Furnishings is a more stringent test then the FMVSS302 which other companies advertise. The FMVSS302 is an automotive fire classification and products which only conform to this classification are not suitable for use in domestic or commercial applications. Our products are totally safe and suitable for use in both domestic and commercial applications.
Advanced Acoustics Soundproofing Mat 3m by 1.25m by 2mm Thin
Advanced Acoustics
£26.55
Dimensions - 1.25m by 3m by 2mm thick per sheet (nominal) - 5kg per square meter. A 2mm thin soundproofing mat designed to block and reduce airborne noise through stud walls and timber joisted floors and ceilings. Please note: Soundproofing Mat is a very heavy product and larger orders may require help with offloading! SoundProofing Mat is a heavy layer mineral loaded soundproofing mat nominally 2mm thick with excellent sound blocking qualities and will give significant sound reduction through lightweight structures when used as a sound barrier. It is equal to lead of the same mass in effectiveness and acts as a thin de-coupling sound blocker in stud walls and timber floors. Biggest sound insulation improvements can be achieved when it is used as one layer sandwiched between two sheets of plasterboard on lightweight structures. One layer of Soundproofing Mat has an insulation value of 24dB. Two layers has an insulation value of 29dB. Three layers has an insulation value of 32dB. Normally, a 3dB improvement is equal to a 50% loss in the volume of noise depending on where you are standing!! Because Soundproofing Mat is produced from recycled manufacturing materials, there may sometimes be a 'rubbery' smell when the product is first unpacked. Usually any smell will dissipate within a few days but as a precaution, we advise applying a thin layer of polythene over the insulation on walls and floors before the final covering is installed to seal in any possible smells. For use on floors first ensure the floorboards are securely screwed to the floor so as not to squeak when walked over. Then use our Acoustic Sealant and fill in the joints between the floorboards and around the edge of the room making the floor is as airtight as possible. Then using our Contact Adhesive glue the layers of soundproofing mat to the timber floor.
Advanced Acoustics 12
Advanced Acoustics
£33.50
The Slider Acoustic Tile is the latest addition to the Advanced Acoustics product range. After extensive prototyping and testing this product is finally ready. The uniquie profile of this precision cut acoustic tile really is an eye catcher. These Slider Acoustic Foam Tiles will make your studio look and sound like something out of this world. The tiles can be placed in an endless combination of clusters and styles as can be seen from the images we have here. The high performance of the tile is helped by the huge depth of tile which helps to control even troublesome rooms. The increased thickness of tile over other standard tiles also means that even lower mid range frequencies are kept under control to ensure your studio is finely tuned and balanced. The acoustic foam we use in manufacturing these and all our other acoustic tiles and products has been carefully developed to offer you optimum performance. The structure of the cells, the foam's density and the composition of the foam is perfect for offering even, controlled and balanced absorption. With a peak thickness of 70mm thick it offers very good performance for the lower mid range and all the way up to the high frequencies. This is all thanks not only to the foam we use with its density of 30kg/m3 and perfect cell structure but it is also thanks to the design of the profile. The Slider profile we have developed is simple but very effective. By taking no foam out of the tile to create the Slider profile, means there is still plenty of foam per tile to give you that required absorption. The tiles are 12" (305mm) by 12" (305mm). They have a peak thickness of 2 3/4" (70mm) and are 3/4" (20mm) at the base. There are 16 tiles in each pack covering a total area of 16sqft (1.48sqm)
Advanced Acoustics 2
Advanced Acoustics
£21.00
Each 2" Acousti-Slab is 610mm (24in) by 1220mm (48in) and are sold individually.The panels are plain faced which means the panels have good even thickness which results in there is more foam per panel compared to profiled tiles of the same thickness.This extra amount of foam results in improved absorption and overall better results.The Acousti-Slab is designed to allow you to make up your own fabric covered acoustic panels instead of using Rockwool or Mineral Wool which can be irritating to use due to escaping fibres. With acoustic foam there are no escaping fibres and so is perfectly safe to use.One panel covers an area of 0.72 m2 (8 ft2).The acoustic panels are available in dark grey only.These thicker panels result in more absorption along a wider range of frequencies especially at the mid range where acoustic tiles have to work hardest to give you a room that has greater balance and control.The thicker tiles also mean that you don't need as much of it because it is more effective than thinner acoustic tiles.The foam has a density of 32kg/m3 and a hardness of 180 Newton.The NRC of the 2" Acousti-Slab Acoustic Panel is 0.85.We specialize and are dedicated in selling only acoustic foam products. You will not find us selling other products such as upholstery foam or packaging foam, foams which are not suitable for acoustic applications.All of our products meet the requirements of schedule 1, part 1 the Furniture and Furnishings (fire) (safety) Regulations 1988 (amended 1989).. PLEASE NOTE: Items sold by Efoam are not genuine Advanced Acoustics products and are not sold with our permission.
Advanced Acoustics EPDM Resilient Sealant Tape - 25mm by 5mm Thick by 10m Long Roll
Advanced Acoustics
£7.75
A self adhesive foam rubber acoustic sealing tape for isolating stud work from the surrounding surfaces. A self adhesive EPDM resilient foam rubber sealing tape designed to decouple timber and steel stud from surrounding surfaces. Also useful for decoupling timber floors from joists and concrete floors. Description A self adhesive EPDM resilient foam rubber acoustic sealing tape. This product is designed for isolating and cushioning stud walls or battens when applied directly to a wall or fixed to floors, walls and ceilings. The acoustic sealing tape is age resistant and chemically neutral against most commonly used lacquers and plastics. These EPDM acoustic strips are resistant to most caustic chemicals, ozone, moisture and UV radiation. Available self-adhesive in 5 or 10mm thicknesses in various widths and 10m length coils. Widths stocked are between 25mm - 100mm as standard. To Isolate Floors, Walls & Ceilings When using timber in the construction of a new isolated stud wall we would always recommend sitting the stud on 10mm thick acoustic strip. By sandwiching the foam sealing tape between the stud, the floor and surrounding walls and ceiling a much more isolated system is created making the entire structure acoustically more efficient and so dramatically reduces any vibration and flanking noise being transmitted into and from adjoining rooms or properties. The Resilient Foam Sealing Tape should be used in addition to Resilient Bars if required and significantly helps increase the walls performance against low frequency bass vibration. PLEASE NOTE: THIS PRODUCT ONLY REDUCES STRUCTURE BORNE SOUND TRANSMITTED THROUGH WALLS WHEN USED IN CONJUNCTION WITH OTHER SOUND CONTROL MATERIALS! Resilient Sealing Tape - 5mm thick x 25mm wide x 10m long.
Advanced Acoustics Silent Panel 10kg/50mm Barrier Foam Composite Acoustic Panel 600mm x 1200mm
Advanced Acoustics
£46.80
By having the noise barrier and sound absorber as one product it acts as a highly effective decoupler to isolate vibration. This product has many uses and applications. It is ideally suited to line equipment enclosures to reduce sound transmission. It is used to line walls and ceilings of mechanical rooms and plant rooms to absorb and contain the noise source. The Silent Panel enables you to create soundproof enclosures for machinery and noisy equipment. If sound absoprtion and noise reduction are required then all you need is one product, the Silent Panel. With it being one easy to install product it reduces expensive installation time and reduces contractors work load.It can also be used in marine vessels to reduce noise transfer from the engine room. Because the top layer of the Silent Panel Barrier Foam Composite is a Class 0 Acoustic Foam it has fireproof properties and the acoustic foam is treated against mildew. The Silent Panel is 600mm x 1200mm and is a total of 55mm thick, 5.2mm Sound Barrier and 50mm Class 0 Acoustic Foam. The Silent Panel is only available in black. The Silent Panels also come with a self adhesive backing already applied so there is no need to purchase supplementary adhesives to mount the barrier foam composite acoustic panels with, simply remove the backing and stick in place. The Silent Panels are suitable for mounting onto metal, wood and plastic to dampen noise tranfer by reducing surface vibration. Thanks to the size of the Silent Panel they are very easy to handle and install and is also easy to cut to the required size with either scissors or a utility knife. Mechanical fastening can also be used with this product. The Silent Panel is flexible and able to be net round corners or wrapped around pipes.
24x AFW305 Pro Acoustic Foam Wedge Tiles , Studio Sound Treatment , 2.23m2 (24 ft2) per pack
Comfortex Acoustics
£30.00
• Each pack contains 24 tiles which are sized 305mm (12in) by 305mm (12in). • The tiles are precision Computer Guided CNC profile cut in a wedge design. The CNC cutting results in a uniform profile on every tile. • One pack of tiles covers an area of 2.23 m2 (24 ft2). • The acoustic tiles are available in dark grey only. • The tiles have a peak thickness of 45mm making them effective for reducing reverberations and echoes within the room. • The specialist foam grade we use is made to achive the optimum sound absorption across the frequency spectrum, to gain a better absorption at the lower end of the spectrum please look at our other BLOCK tiles. • The NRC of the AFW305 Wedge Tile is 0.55 with the following certificated performance data: 125Hz - 0.10, 250Hz - 0.29, 500Hz - 0.50, 1000Hz - 0.68, 2000Hz - 0.75, 4000Hz - 0.98, • Pro Acoustic only use professional grade open cell acoustic foam. • Pro Acoustic specialize and are dedicated in selling quality acoustic foam products. We sell Factory direct using only specialist foam grades that are suitable for acoustic applications. • All of our products meet Crib 5, UL94 and the requirements of schedule 1, part 1 the Furniture and Furnishings (fire) (safety) Regulations 1988 (amended 1989). This Furniture and Furnishings is a more stringent test then the FMVSS302 which other companies advertise. The FMVSS302 is an automotive fire classification and products which only conform to this classification are not suitable for use in domestic or commercial applications. • Our products are totally safe and suitable for use in both domestic and commercial applications.
Advanced Acoustics 12
Advanced Acoustics
£33.50
One pack of tiles contains 16 tiles which are sized 305mm (12in) by 305mm (12in). A pack contains a combination of 8 wedge profile tiles and 8 plain faced tiles with a tapered edge. The CNC profiled tiles offers a greater surface area over flat tiles which enables them to 'catch' sound waves more easily and effectively. The plain faced tiles give you the added amount of foam needed to absorb those lower midrange frequencies more effectively. The profiled tiles have a peak thickness of 40mm and are 20mm at the base. The plain faced tiles are 60mm thick and taper down to 20mm. One pack covers an area of 1.48 m2 (16 ft2). The acoustic tiles are available in dark grey only. These thicker tiles result in more absorption along a wider range of frequencies especially at the mid range where acoustic tiles have to work hardest to give you a room that has greater balance and control. The thicker tiles also mean that you don't need as much of it because it is more effective than thinner acoustic tiles. The foam has a density of 32kg/m3 and a hardness of 180 Newton. The NRC of the Wedge Euphonic Acoustic Tiles is 0.75 with the following certificated performance data: 125Hz - 0.11, 250Hz - 0.42, 500Hz - 0.83, 1000Hz - 0.86, 2000Hz - 0.97, 4000Hz - 1.09 We only use professional grade open cell acoustic foam. We specialize and are dedicated in selling only acoustic foam products. All of our products meet the requirements of schedule 1, part 1 the Furniture and Furnishings (fire) (safety) Regulations 1988 (amended 1989). This Furniture and Furnishings is a more stringent test then the FMVSS302 which other companies advertise.Products which only conform to this classification are not suitable for use in domestic or commercial applications.
Advanced Acoustics 10kg Soundproofing Mat 2m by 1.2m by 5mm Thin
Advanced Acoustics
£34.50
Dimensions - 1.2m by 2m by 5mm thick per sheet (nominal) - 10kg per square meter. A 5mm thin soundproofing mat designed to block and reduce airborne noise through stud walls and timber joisted floors and ceilings. Please note: Soundproofing Mat is a very heavy product and larger orders may require help with offloading! Soundproofing Mat is a heavy layer mineral loaded soundproofing mat nominally 5mm thick with excellent sound blocking qualities and will give significant sound reduction through lightweight structures when used as a sound barrier. It is equal to lead of the same mass in effectiveness and acts as a thin de-coupling sound blocker in stud walls and timber floors. Biggest sound insulation improvements can be achieved when it is used as one layer sandwiched between two sheets of plasterboard on lightweight structures. One layer of Soundproofing Mat has an insulation value of 28dB. Normally, a 3dB improvement is equal to a 50% loss in the volume of noise depending on where you are standing!! Because Soundproofing Mat is produced from recycled manufacturing materials, there may sometimes be a 'rubbery' smell when the product is first unpacked. Usually any smell will dissipate within a few days but as a precaution, we advise applying a thin layer of polythene over the insulation on walls and floors before the final covering is installed to seal in any possible smells. For use on floors first ensure the floorboards are securely screwed to the floor so as not to squeak when walked over. Then use our Acoustic Sealant and fill in the joints between the floorboards and around the edge of the room making the floor is as airtight as possible. Then using our Contact Adhesive glue the layers of soundproofing mat to the timber floor.
Advanced Acoustics 3
Advanced Acoustics
£31.50
Each 3" Acousti-Slab is 610mm (24in) by 1220mm (48in) and are sold individually. The panels are plain faced which means the panels have good even thickness which results in there is more foam per panel compared to profiled tiles of the same thickness. This extra amount of foam results in improved absorption and overall better results. The Acousti-Slab is designed to allow you to make up your own fabric covered acoustic panels instead of using Rockwool or Mineral Wool which can be irritating to use due to escaping fibres. With acoustic foam there are no escaping fibres and so is perfectly safe to use. One panel covers an area of 0.72 m2 (8 ft2). The acoustic panels are available in dark grey only. These thicker panels result in more absorption along a wider range of frequencies especially at the mid range where acoustic tiles have to work hardest to give you a room that has greater balance and control. The thicker tiles also mean that you don't need as much of it because it is more effective than thinner acoustic tiles. The foam has a density of 32kg/m3 and a hardness of 180 Newton. The NRC of the 3" Acousti-Slab Acoustic Panel is 1.00.We specialize and are dedicated in selling only acoustic foam products. You will not find us selling other products such as upholstery foam or packaging foam, foams which are not suitable for acoustic applications.All of our products meet the requirements of schedule 1, part 1 the Furniture and Furnishings (fire) (safety) Regulations 1988 (amended 1989). This Furniture and Furnishings is a more stringent test then the FMVSS302 which other companies advertise. The FMVSS302 is an automotive fire classification and products which only conform to this classification are not suitable for use in domestic or commercial applications. PLEASE NOTE: Items sold by Efoam are not genuine Advanced Acoustics products and are not sold with our permission.
Advanced Acoustics Silent Panel 5kg/25mm Barrier Foam Composite Acoustic Panel 600mm x 1200mm
Advanced Acoustics
£28.80
By having the noise barrier and sound absorber as one product it acts as a highly effective decoupler to isolate vibration. This product has many uses and applications. It is ideally suited to line equipment enclosures to reduce sound transmission. It is used to line walls and ceilings of mechanical rooms and plant rooms to absorb and contain the noise source. The Silent Panel enables you to create soundproof enclosures for machinery and noisy equipment. If sound absoprtion and noise reduction are required then all you need is one product, the Silent Panel. With it being one easy to install product it reduces expensive installation time and reduces contractors work load. It can also be used in marine vessels to reduce noise transfer from the engine room. Because the top layer of the Silent Panel Barrier Foam Composite is a Class 0 Acoustic Foam it has fireproof properties and the acoustic foam is treated against mildew. The Silent Panel is 600mm x 1200mm and is a total of 28mm thick, 2.6mm Sound Barrier and 25mm Class 0 Acoustic Foam. The Silent Panel is only available in black. The Silent Panels also come with a self adhesive backing already applied so there is no need to purchase supplementary adhesives to mount the barrier foam composite acoustic panels with, simply remove the backing and stick in place. The Silent Panels are suitable for mounting onto metal, wood and plastic to dampen noise tranfer by reducing surface vibration. Thanks to the size of the Silent Panel they are very easy to handle and install and is also easy to cut to the required size with either scissors or a utility knife. Mechanical fastening can also be used with this product. The Silent Panel is flexible and able to be net round corners or wrapped around pipes.
Advanced Acoustics 12
Advanced Acoustics
£33.50
One pack of tiles contains 12 tiles which are sized 305mm (12in) by 305mm (12in). A pack contains 12 plain faced tiles with a tapered edge. The plain faced tiles give you the added amount of foam needed to absorb those lower midrange frequencies more effectively. The plain faced tiles are 60mm thick and taper down to 20mm. One pack covers an area of 1.11 m2 (12 ft2). The acoustic tiles are available in dark grey only. These thicker tiles result in more absorption along a wider range of frequencies especially at the mid range where acoustic tiles have to work hardest to give you a room that has greater balance and control. The thicker tiles also mean that you don't need as much of it because it is more effective than thinner acoustic tiles. The foam has a density of 32kg/m3 and a hardness of 180 Newton. The NRC of the Tegular Acoustic Tiles is 0.95 with the following certificated performance data: 125Hz - 0.17, 250Hz - 0.51, 500Hz - 1.10, 1000Hz - 1.12, 2000Hz - 1.09, 4000Hz - 1.15 We only use professional grade open cell acoustic foam. We specialize and are dedicated in selling only acoustic foam products. All of our products meet the requirements of schedule 1, part 1 the Furniture and Furnishings (fire) (safety) Regulations 1988 (amended 1989). This Furniture and Furnishings is a more stringent test then the FMVSS302 which other companies advertise.Products which only conform to this classification are not suitable for use in domestic or commercial applications.
Advanced Acoustics 12
Advanced Acoustics
£40.00
The Cube Acoustic TIle is the latest addition to the Advanced Acoustics product range. After extensive prototyping and testing this product is finally ready. The uniquie profile of this CNC cut acoustic tile really is an eye catcher. These precision cut Cube Acoustic Foam Tiles will make your studio look and sound like something out of this world. The tiles can be placed in an endless combination of clusters and styles as can be seen from the images we have here. The high performance of the tile is helped by the Cube effect profile which helps to catch and trap sound waves no matter what angle the fire from. The increased thickness of tile over other standard tiles also means that even lower mid range frequencies are kept under control to ensure your studio is finely tuned and balanced. The acoustic foam we use in manufacturing these and all our other acoustic tiles and products has been carefully develped to offer you optimum performance. The structure of the cells, the foam's density and the composition of the foam is perfect for offering even, controlled and balanced absorption. As you can see below even though the product is only 57mm thick it offers very good performance for the lower mid range and all the way up to the high frequencies. This is all thanks not only to the foam we use with its density of 30kg/m3 and perfect cell structure but it is also thanks to the design of the profile. The cube profile we have painstakingly developed is the optimum for getting the best performance out of the tile. The surface area of each tile is massively increased when compared against a flat piece of foam. That, balanced with hardly taking any foam out of the tile to create the cube profile, means there is still plenty of foam per tile to give you that required absorption. The tiles are 12" (305mm) by 12" (305mm). They have a peak thickness of 2 1/4" (57mm) and are 3/4" (20mm) at the base. There are 12 tiles in each pack covering a total area of 12sqft (1.1sqm)
Advanced Acoustics 1
Advanced Acoustics
£10.50
Each 1" Acousti-Slab is 610mm (24in) by 1220mm (48in) and are sold individually. The panels are plain faced which means the panels have good even thickness which results in there is more foam per panel compared to profiled tiles of the same thickness. This extra amount of foam results in improved absorption and overall better results. The Acousti-Slab is designed to allow you to make up your own fabric covered acoustic panels instead of using Rockwool or Mineral Wool which can be irritating to use due to escaping fibres. With acoustic foam there are no escaping fibres and so is perfectly safe to use. One panel covers an area of 0.72 m2 (8 ft2). The acoustic panels are available in dark grey only. The foam has a density of 32kg/m3 and a hardness of 180 Newton. The NRC of the 1" Acousti-Slab Acoustic Panel is 0.55. We only use professional grade open cell acoustic foam. We specialize and are dedicated in selling only acoustic foam products. You will not find us selling other products such as upholstery foam or packaging foam, foams which are not suitable for acoustic applications. All of our products meet the requirements of schedule 1, part 1 the Furniture and Furnishings (fire) (safety) Regulations 1988 (amended 1989). This Furniture and Furnishings is a more stringent test then the FMVSS302 which other companies advertise. The FMVSS302 is an automotive fire classification and products which only conform to this classification are not suitable for use in domestic or commercial applications. Our products are totally safe and suitable for use in both domestic and commercial applications. PLEASE NOTE: Items sold by Efoam are not genuine Advanced Acoustics products and are not sold with our permission.
Advanced Acoustics 12
Advanced Acoustics
£48.00
One pack of tiles contains 24 tiles which are sized 305mm (12in) by 305mm (12in). The tiles are precision CNC Machine cut wedge profile which offers a greater surface area over flat tiles which enables them to 'catch' sound waves more easily and effectively. The CNC machining results in uniform profile and size every time. One pack covers an area of 2.23 m2 (24 ft2). The acoustic tiles are available in dark grey only. The tiles have a peak thickness of 75mm and are 40mm at the base which makes them effective for reducing reverberations and echoes in the room. The foam has a density of 30kg/m3. The NRC of the Wedge PRO Acoustic Tiles is 0.95 with the following certificated performance data: 125Hz - 0.17, 250Hz - 0.57, 500Hz - 0.91, 1000Hz - 1.08, 2000Hz - 1.15, 4000Hz - 1.14 We only use professional grade open cell acoustic foam. We specialize and are dedicated in selling only acoustic foam products. You will not find us selling other products such as upholstery foam or packaging foam, foams which are not suitable for acoustic applications. All of our products meet Crib 5, UL94 and the requirements of schedule 1, part 1 the Furniture and Furnishings (fire) (safety) Regulations 1988 (amended 1989). This Furniture and Furnishings is a more stringent test then the FMVSS302 which other companies advertise. The FMVSS302 is an automotive fire classification and products which only conform to this classification are not suitable for use in domestic or commercial applications. Our products are totally safe and suitable for use in both domestic and commercial applications.
Advanced Acoustics M20 Soundproof Matting 1m by 1m by 20mm Thick
Advanced Acoustics
£36.75
Size - 1m by 1m sheets, 20mm thick - £34.99 eachM20 Acoustic Matting is a 20mm thick recycled rubber soundproofing matting designed to be installed on existing walls to improve the acoustic performance and reduce the amount of sound transferring between two rooms by up to 87%. DescriptionThe high mass of M20AD is designed to absorb and block a degree of airborne noise that penetrates poorly soundproofed party walls. Easy to fit, this 20mm thick insulation is simply glued to the existing wall with two layers of 12.5mm acoustic plasterboard bonded on top and is an easy solution if you are disturbed by normal levels of noise from your neighbours.It is ideal for soundproofing party walls, separating stairs and hallways where space is at a premium. Particularly useful for meeting Part E building regs.Please note: This sound insulation is effective at reducing normal noise levels that should not normally be heard, for example talking, radio and TV sound. Loud music, loud noise and bass noise will always be audible although its intensity will be reduced.Before installing any soundproofing onto walls, flanking noise skirting around the sound insulation can reduce effectiveness so to obtain the best result, it is advised the void between the joists in timber suspended floors is filled with Rockwool Flexi-Slab immediately adjacent to the party wall. In addition, the floor overlaid with a double layer of Soundproofing Matting.The ceiling above should also have Rockwol Flexi-Slab in the void or if a loft is above, then the required amount of fibreglass insulation. In all cases, the ceiling should have an additional layer of high density Acoustic Plasterboard screwed up with soundproof matting sandwiched between the layers.
Advanced Acoustics Acoustic Vent 9x3 Rectangle
Advanced Acoustics
£99.75
It has always been difficult to devise an efficient ventilation system when designing any form of soundproofed room because any hole made through a wall will usually allow noise through. Acoustic Air Vents have been designed to allow ventilation through a wall and fitted with a very effective sound absorbing lining that substantially reduces noise penetration through the vent without reducing airflow. These Acoustic Vents are now available to obtain the maximum amount of sound control possible in any soundproofed room and are particularly useful for studios, music rooms, garage conversions, and many other instances where a degree of sound control and ventilation is required. TAL4H&M- '9x3' Acoustic AirLiner Set with Hit & Miss Ventilator (Up to 39dB Dn,e,w) Controllable air vent for background room ventilation. Acoustic lining reduces sound by 38dB with internal grille fully open and 39dB when closed Internal baffle reduces light and draughts. Internal hit & miss grille manually adjusted with an easy sliding action giving control over air flow. External baffles prevent cross cavity water transfer. Internal and external grilles U.V. stabilised. New higher equivalent area confirmed by the BRE. Acoustic performance tests by BRE Acoustics. TAL4H&M- 9x3" Acoustic Air Vent Set with Hit & Miss ventilator. · Air brick 220mmW x 71mmH. · Length Extends from 250mm to 368mmL. · Width 220mm · Louvre Grille: 270mmL x 97mmH. · Cowl: 255mmL x 96mmH x 44mmD. · Hit & Miss Grille: 271mmL x 95mmH. Acoustic rating 39dB open and 40dB closed
Advanced Acoustics 12
Advanced Acoustics
£33.50
The sawtooth profiled acoustic tile is our newest custom designed profile. These tiles look the part and are perect for studios, both professional and home alike. The precision CNC cut of the sawtooth profile is clean and tidy and the consistent uniform profile makes installation of the tiles a breeze too.One pack of tiles contains 24 tiles which are sized 305mm (12in) by 305mm (12in). The tiles are precision CNC Machine cut sawtooth profile which offers a greater surface area over flat tiles which enables them to 'catch' sound waves more easily and effectively. The CNC machining results in uniform profile and size every time. One pack covers an area of 2.23 m2 (24 ft2). The acoustic tiles are available in dark grey only. The tiles have a peak thickness of 40mm and are 20mm at the base which makes them effective for reducing reverberations and echoes in the room. The foam has a density of 30kg/m3 and a hardness of 180 Newton. The NRC of the Wedge Standard Acoustic Tiles is 0.60 We only use professional grade open cell acoustic foam. We specialize and are dedicated in selling only acoustic foam products. You will not find us selling other products such as upholstery foam or packaging foam, foams which are not suitable for acoustic applications. All of our products meet Crib 5, UL94 and the requirements of schedule 1, part 1 the Furniture and Furnishings (fire) (safety) Regulations 1988 (amended 1989). This Furniture and Furnishings is a more stringent test then the FMVSS302 which other companies advertise. The FMVSS302 is an automotive fire classification and products which only conform to this classification are not suitable for use in domestic or commercial applications. Our products are totally safe and suitable for use in both domestic and commercial applications.
Advanced Acoustics EPDM Resilient Sealant Tape - 50mm Wide by 5mm Thick by 10m Long Roll
Advanced Acoustics
£15.65
A self adhesive foam rubber acoustic sealing tape for isolating stud work from the surrounding surfaces. A self adhesive EPDM resilient foam rubber sealing tape designed to decouple timber and steel stud from surrounding surfaces. Also useful for decoupling timber floors from joists and concrete floors. Description A self adhesive EPDM resilient foam rubber acoustic sealing tape. This product is designed for isolating and cushioning stud walls or battens when applied directly to a wall or fixed to floors, walls and ceilings. The acoustic sealing tape is age resistant and chemically neutral against most commonly used lacquers and plastics. These EPDM acoustic strips are resistant to most caustic chemicals, ozone, moisture and UV radiation. Available self-adhesive in 5 or 10mm thicknesses in various widths and 10m length coils. Widths stocked are between 25mm - 100mm as standard. To Isolate Floors, Walls & Ceilings When using timber in the construction of a new isolated stud wall we would always recommend sitting the stud on 10mm thick acoustic strip. By sandwiching the foam sealing tape between the stud, the floor and surrounding walls and ceiling a much more isolated system is created making the entire structure acoustically more efficient and so dramatically reduces any vibration and flanking noise being transmitted into and from adjoining rooms or properties. Foam sealing tape isolating timber stud from a floor or wall The Resilient Foam Sealing Tape should be used in addition to Resilient Bars if required and significantly helps increase the walls performance against low frequency bass vibration. PLEASE NOTE: THIS PRODUCT ONLY REDUCES STRUCTURE BORNE SOUND TRANSMITTED THROUGH WALLS WHEN USED IN CONJUNCTION WITH OTHER SOUND CONTROL MATERIALS! Resilient Sealing Tape - 5mm thick x 50mm wide x 10m long.
Advanced Acoustics Silent Floor Ultra Acoustic Underlay 3.6sqm Pack - 5X 0.6m by 1.2m Sheets
Advanced Acoustics
£85.00
The Advanced Acoustics Silent Floor Ultra has gone through many months of development to improve on the already effective Quiet Floor Plus. The Advanced Acoustics Silent Floor Ultra Underlay is more effective, thinner and cheaper than QuietFloor Plus and other similar products. Silent Floor Ultra is an acoustic underlay which will reduce both airborne noise and impact noise. We have used 2mm thick Soundproofing Mat as the core layer to help with reducing airborne noise. Impact noise is reduced by use of a 25kg/m3 closed cell cross linked PE foam. The benefit of this foam as opposed to the reconstituted foam used in other acoustic underlays is that is will not breakdown and crumble over time. The foam we have used in this acoustic underlay is hardwearing and yet still comfortable to walk on. Additionally the foam as well as the sound barrier mat is completely recyclable and free from lead and bitumen. Also because the materials we have selected are durable it has a very long life span. The Silent Floor Ultra is the quickest and most effective means of reducing airborne noise and impact noise for floors which means labour costs are greatly reduced and is simple enough to lay even if you only have basic DIY skills. By using this product instead of regular underlay traffic noise from above is virtually eliminated when used in conjunction with carpet. You will find a lot of acoustic underlays using two layers of soundproofing mat, one of the top and one on the bottom but during the development of this product we found that by going this reduction in impact noise is greatly affected. However performance is improved by removing the top layer of soundproofing mat and instead installing a layer of our 2mm soundproofing mat before fitting this Silent Floor Ultra Acoustic Underlay. Of course if you prefer you can just lay this product straight on top of your floor ready for the carpet or laminate floor to be fitted.