Aeotec

Aeotec Multisensor 6, Z-Wave Plus 6-in-1 motion, temperature, humidity, light, UV, vibration sensor ,No battery, White
Aeon Labs
£54.22
Aeon Labs AEOEZW100 Technical details -Colour of product: White -Placement supported: Indoor
Aeotec Z-Stick Gen5, Z-Wave Plus USB to create gateway, White
Z-Wave
£45.00
With the new Z-Wave Plus Z-Stick S5 from Aeon Labs your PC, notebook, Bare-bone, Raspberry Pi etc. change into the central controller of your smart home. The control of the Z-Wave network is realized via the "Z-Wave Serial API" (according to "Z-Wave Application Programmers Guide, INS10247"). It's also used by well-known Z-Wave control programs such as IP Symcon, Homeseer etc. This allows you to use the Aeotec USB Z-stick GEN5 with other Z-Wave software solutions. Thanks to the integrated battery, you can also include or exclude any devices in your Z-Wave network by pushing on the local button, when PC or Notebook is turned off. This device is a replacement for the Aeotec Z-Stick S2. This Z-Wave Plus compatible device contains the 5th generation Z-Wave chipset for improved battery life, range and bandwidth.
Aeotec WallMote Quad, Z-Wave Plus wireless wall switch, 4 button, 16 scene remote control
Aeotec
£49.99
Wireless Z-Wave control. Perfected. Lighting control. Appliance control. Scene control. Z-Wave control. There are thousands of Z-Wave devices that you can have in your home, but controlling them is never natural. Typically, you have to pull out your mobile phone or boot up your computer. WallMote brings natural, intrinsic control to the connected home. WallMote is the perfect Z-Wave controller. Wireless. Battery powered. Designed like a wall switch, but capable of controlling hundreds of devices of over a dozen Z-Wave scenes. Ports & interfaces -Connectivity technology: Wireless -Z-Wave: Y Design -Colour of product: White -LED indicators: Status Performance -Operating frequency: 868.42
Aeotec Nano Switch with Power Metering - Z-Wave Plus
Aeotec
£43.57
AEON Labs Aeotec Nano Switch with Power Metering (AEOEZW116)
Aeotec Siren 6, Z-Wave Plus S2 Safety Speaker, Wall-Mounted Sound & Light Security Intruder Alarm with Backup Battery, 110dB
Aeotec
£59.99
The Aeotec Siren 6 makes your home smarter and safer. The Aeotec Siren 6 enriches your Smart Home with a further safety factor. In combination with other Z-Wave devices, the visually appealing alarm siren warns of various situations with acoustic (110db) and visual signals. Whether water escapes in the cellar, smoke develops in the kitchen or an open door at night, the siren draws your attention to all these conspicuous features. You can also use the siren as a doorbell in addition to the alarm functions. The Aeotec Siren 6 plays 30 different tones, which are defined via parameters in the gateway. In summary, this device works particularly well for any type of acoustic and visual alarm in your Smart Home. The power supply of the Aeotec Siren 6 works easily via a power socket or battery operated. Due to its high-quality design, the siren fits well into your rooms and is hardly noticed. - Siren with acoustic and visual alarm - Can also be used as a doorbell - 30 preconfigured signal tones - Up to 110 db - Power supply: 230V - Battery operation: 1x PT502035 (400mAh) (only for bridging) - Safety standard S2 - Wireless technology: Z-Wave Plus
Aeotec Dual Nano Switch on / off controller, 2 switches, Z-Wave Plus, In-wall, Compatible with Alexa
Aeotec
£49.03
With the AEOTEC Dual Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch. The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. Its recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box. - Flush-mounted radio module - Maximum load: 2x 1150W - Integrates existing installations (lighting, sockets...) into a Z-Wave network - Works with momentary or toggle switches - Voltage: 230V, 50Hz - Wiring: Neutral conductor required - Wireless Technology: Z-Wave Plus
Aeotec Door  /  Window Sensor 6 with Rechargeable Battery, Z-Wave Plus ON/OFF Magnetic Detector for Home Security Protection  & Automation , Burglar Alert, Paintable Design
Aeotec
£38.49
Door/Window Sensor 6 Power -Battery technology: Lithium-Ion (Li-Ion) Features -Connectivity technology: Wireless -Interface: Z-Wave -Colour of product: White -Maximum indoor range: 150 m -Housing material: Acrylonitrile butadiene styrene (ABS)
Aeotec LED Strip, Z-Wave Plus RGBW Dimmable Smart Lighting Strip with Cool & Warm Whites for Home Lighting Decoration, Adjustable Length, IP65 Waterproof, 2.4 Meters, Adjustable, Extendable
Aeotec
£79.99
LED Strip is the cutting edge of Z-Wave lighting. Built upon Aeotec's leading LED Bulb technology, LED Strip can be used to both decorate a home and to functionally light it. The box comes with 2.4m long strip. Though it's available in lengths of 1 to 5 meters, LED Strip is only 3mm (0.12') thick, meaning that it can be installed in minutes almost anywhere. Via Aeotec's Gen5 technology, it offers color and white light selection, along with dimming and scheduling.
Aeotec DSE010 Multisensor 6 Recessor, White
Aeon Labs LLC
£19.13
Recessor for Multi Sensor Elegantly hide sensors on any surface. Multi Sensor Recessor is used in conjuction with the Multi Sensor 6-in-1 and Motion Sensor 3-in-1 as a mounting accessory. Secure your sensor to a ceiling or flat wall. Product highlights: * 1.2cm protrusion * Easily installed and removed * Ceiling and Wall * 30° adjustable angle Specifications: Hole size needed for mounting: 70 - 75mm IMPORTANT: Our products are manufactured by AEOTEC. Devices manufactured under DOMUX brand uses the same materials than AEOTEC devices and enjoy a 2 years warranty and Europeen After Selling Service based in France. Devices ares certified Z-Wave Plus EU 868.42MHz and work perfectly with the most of Z-Wave hubs and smart solutions
Aeotec Siren Gen5, Z-Wave Plus, 105dB siren with strobe alerts, Plug-in, Backup battery
AEOTEC
£56.60
The DSD31 Z-Wave compatible siren and visual alert will warn everybody in the building the event of a break-in, fire, flood or medical emergency, depending on configuration and association with Z-Wave sensors such as door/window sensors or motion detectors. The siren can be plugged into any mains socket for power. In the event of a power failure the built-in lithium-ion battery provides up to 3 hours of stand-by power. The alarm intensity is 105 dB at 1 m range. This Generation 5 Z-Wave chip-set device is Z-Wave Plus compatible, providing improved battery life, range and bandwidth. Only available with a Type E plug, which fits both Type E and Type F (Schuko) sockets. This Z-Wave Plus compatible device contains the 5th generation Z-Wave chipset for improved battery life, range and bandwidth.