Aerial 433MHz

eightwood 433MHz SMA Antenna SMA Connector Omni-directional Vertical NFC RFID Antenna 2pcs for Wireless Homematic CCU2 CC1101 Ham Radio
RFSolution
£7.29
Product Description: The antenna is designed for the signal band terminal. After optimizing the design and tuning carefully, it has good VSWR. The small dimension and the light structure make it easy to install. It also has a good shock and anti-aging performance. The antenna can be turned angle or straight, it is easier to install on your device The rubber duck antenna with sma plug, is suitable for everything the most demanding applications. The antenna is tuned for 433MHz with 3dBi gain. Housed in a robust low-profile rubber, the antenna is compact and very durable.
Eightwood Helical Remote Control Antenna 2dBi Helical 10pcs Solder DIY Spring Antenna 433MHz 470MHz 490MHz 510MHz 868MHz for Homematic PCB Kit Wireless Module Antenna
RFSolution
£5.47
The spring antenna is inexpensive and can be used for a variety of 868MHz radios, e.g. For example, for the wireless module CC1100 / CC1020 / NRF905 / NRF903 / SI4432 and other products that are easy to use, and the antenna is soldered directly to the antenna of a radio module. With this antenna, the range of Homematic CCU1, CCU2 , CCU3, CHARLY radio module and RaspberryMatic. For all devices that work with the 868 MHz frequency. The pigtail is already stripped and ready for soldering.
Aerial, Outdoor antenna V2 ANS433 for any gate automation, 433MHz-868MMHz, 50 Ohm, Range up to 250m!!!
V2
£18.80
Encrease remote reception range up to 250m!!! ORIGINAL ANS433-868Mhz AERIAL FOR ALL GATE AUTOMATION SYSTEMS!!! Designed for any gate automation control boards or receivers. Outdoor antenna with protective covering for receivers provided with 2.5m RG-58 cable - Frequency: 433/868 Mhz and Impedence: 50 Ohm Same day dispatch with tracking number!!! Have a Question? Simply message us and we will reply almost instantly ! WE ARE TOTALLY COMMITTED TO 100% CUSTOMER SATISFACTION !! We can guarantee that if you experience ANY problems, we will endeavour to resolve them as a matter of urgency so please get in touch with us before leaving your feedback !!!
Cardin ANS400 Aerial 433 MHz Cardin
CARDIN
£25.54
Antenna description for 433 MHz receiver.
camellia-uk High Performance Polarization Type Aerial 433Mhz 3dbi SMA Plug With Magnetic Base 1.5m Cable For Ham Radio
camellia-uk
£3.97
Features:Cable Type RG174Connector Type SMA Male connector (Default )/SMB/SMC/BNC/FME/TNC/MCX /MMCX or otherMounting MagneticPolarization Type : VerticalHigh corrosion and wear resistance for long time using.Description:Frequency Range: 433+/-15 MHzBandwidth: 30MHzVSWR:  ≤1.5Gain: 3 dBiMax Input power: 50WInput Impedance: 50 ohmSpecifications:Cable Length﹙mm﹚: 1500mm or otherRadiation : Omni-directionMax Diameter: 30mmMin Diameter: 1.5mmMax wind speed : 200km/hColor: blackPackage Included:1 X Aerial SMA Plug 
Aukru 3x 433MHz RF Wireless Transmitter and Receiver Module Kit for Arduino Raspberry Pi
Aukru
£5.89
Aukru 3x Transmitter and Receiver 433Mhz for Arduino Raspberry Pi Transmitter Operating Voltage: 3.5-12VDC Size: 19mm x 19mm AM transfer rate: 4KB / S Transmitting Power: 10mW Amplitude Modulation: ASK or OOK Launch Distance: 20-200 Metres (dependent on supply voltage) Transfer Rate:
ImmersionRC 433MHz
ImmersionRC
£14.99
Genuine ImmersionRC antennas. Antennas are some of the most critical components of your FPV /LRS set up. A well-constructed, high-gain antenna can dramatically improve your performance for your long-range-rc system ("LRS"). The "Sander" style antenna is a simple monopole style design, with a SMA connection. This has proven to outperform stock duck antennas that have the element coiled to make it a more friendly form factor. The "Sander" antenna is used as the OEM on ImmersionRC gear and is a direct replacement or makes for a great upgrade to other 433Mhz systems or telemetry radios. Specs: connector: SMA Weight: 7g Frequency: 433Mhz
Eightwood DAB Car Aerial BNC Antenna Patch Aerial Glass Mount Windshield Antenna with BNC Plug 3M 9.8ft Antenna Extender Cable for CB Radio Ham Radio
RFSolution
£12.99
This active adapter / splitter allows you to receive your DAB digital radio signals so that you can keep your existing antenna and DAB aftermarket radio without the need for an additional DAB Antenna. Fast and easy to install and save money while installing an Aftermarket DAB Stereo. Allows a hard improvement against windshield mounted antennas without the need for a second antenna.
DollaTek 10Pcs 433MHz RF Wireless Transmitter and Receiver Module Kit for Arduino Raspberry Pi
DollaTek
£10.99
DollaTek trademark Reg.NO:013726393TransmitterOperating Voltage: 3.5-12VDC Size: 19mm x 19mm AM transfer rate: 4KB / S Transmitting Power: 10mW Amplitude Modulation: ASK or OOK Launch Distance: 20-200 Metres (dependent on supply voltage) Transfer Rate:
External Antenna Aerial 433 MHz 3 Metre Cable Magnetic Base
Giant
£17.10
3 dBi 433 MHz Magnetic Base Antenna for better wireless transmission serves as 1 radio antenna 433 MHz Ideal for garage door openers etc. The antenna has a 3 metre long coaxial cable, with a strong magnetic base, so it can be placed directly onto the barrier or attaches to wall mounted Suitable for all Radio Systems with 433 MHz Operating range up to 200 metres possible Technical Information: Height: 260 mm Gain: 3.5 dB Max Input Power: 55 W Frequency: 433 MHz Cable Length: 3 m Package Content: 1 x 433MHz antenna 1x Adaptor with plug and cable
External Antenna Aerial 433 MHz 3 Metre Cable Magnetic Base
Giant
£17.10
3 dBi 433 MHz Magnetic Base Antenna for better wireless transmission serves as 1 radio antenna 433 MHz Ideal for garage door openers etc. The antenna has a 3 metre long coaxial cable, with a strong magnetic base, so it can be placed directly onto the barrier or attaches to wall mounted Suitable for all Radio Systems with 433 MHz Operating range up to 200 metres possible Technical Information: Height: 260 mm Gain: 3.5 dB Max Input Power: 55 W Frequency: 433 MHz Cable Length: 3 m Package Content: 1 x 433MHz antenna 1x Adaptor with plug and cable
Eightwood 433MHz Antenna SMA Antenna 3dbi SMA Male Adapter with Magnetic Base 3M 300cm 9.8ft Extension Cable for CB Radio Wireless Homematic CCU2 CC1101 Ham Radio
RFSolution
£6.99
Product description: The antenna is designed for the signal band terminal. After optimizing the design and tuning carefully, it has good VSWR. The small dimension and the light structure make it easy to install. It also has good shock and anti-aging performance. The rubber duck antenna with sma plug, is suitable for everything the most demanding applications. The antenna is tuned for 433MHz with 3dBi gain. Housed in a robust low-profile rubber, the antenna is compact and very durable.
Magnetic Aerial / Antenna for gate automation and Alarm system remote controls 433Mhz with extra long 3m cable!!! Range: 150m-200m
Magnetic aerial
£9.80
Increase remote reception range up to 150m - 200m+ !!! 433Mhz AERIAL FOR GATE AUTOMATION and ALARM SYSTEMS!!! Working frequency - 400 - 480Mhz ( optimal at 433Mhz ) Woking distance - 150 - 200m. Bandwidth - ±3 Mhz Antenna gain - 3.0 dBi Base diameter - 3 cm. Total antenna height - 14.5 cm. Cable type - RG-174. Cable length - 3m. Connection model - Wire connection. Polarization mode - Vertical Power - 50 w. VSWR value - < 1.5 The Steel 90° mounting bracket comes with an aerial! Very simple 2 step installation!!! 1) Strip and connect inner conductor and braided shield to your control board or receiver. 2) Locate magnetic base aerial on some metal surface near receiver. Note: If you don't have a metal surface near by, please use the steel mounting bracket, which comes with an aerial!!! - Outdoor antenna with protective covering for receivers, provided with an extra long 3m RG-174 cable - Frequency: 400 - 480MhzMhz and Impedence: 50 Ohm Same day dispatch with tracking number!!! WE ARE TOTALLY COMMITTED TO 100% CUSTOMER SATISFACTION.
Aukru 433 MHz RF Wireless Transmitter + Receiver Module Kit for Arduino Raspberry Pi
Aukru
£3.98
Aukru Transmitter and Receiver 433Mhz for Arduino Raspberry Pi Transmitter Operating Voltage: DC 3.5-12V Size: 19mm x 19mm AM transfer rate: 4KB / S Transmitting Power: 10mW Amplitude Modulation: ASK or OOK Launch Distance: 20-200 Metres (dependent on supply voltage) Transfer Rate: Emission frequency: 433M Receiver Voltage: 5VDC Current: 4mA Frequency: 433mZ Size: 30mm x 14mm x 7mm Receiver Sensitivity: -103DBm These modules are used for projects when you need to communicate wirelessly between 2 devices. It is possible to increase the range by adding a small length of cable which the device will use as an aerial Package Included: 1 x Receiver module(433Mhz) 1 x Transmitter module (433MHz)
V2 ANS433 Top range Outdoor antenna / aerial for gate automation receivers, 433Mhz-868Mhz, 50 Ohm with 2,5m cable RG58. Range: Up to 250m!!!
V2
£19.80
Increase your remote reception range up to 250m!!! ORIGINAL V2 ANS433-868Mhz AERIAL FOR ALL GATE AUTOMATION SYSTEMS!!! Designed for any gate automation remote controls, control boards or receivers. Outdoor antenna with protective covering for receivers provided with 2.5m RG-58 cable - Frequency: 433-868 Mhz and Impedence: 50 Ohm Same day dispatch with tracking number!!! Have a Question? Simply message us and we will reply almost instantly ! WE ARE TOTALLY COMMITTED TO 100% CUSTOMER SATISFACTION
Willwin 3pcs 433MHz RF Wireless Transmitter and Receiver Module Kit for Arduino/Arm/McU/Raspberry pi
Willwin
£5.90
Description:VCC voltage module operating voltage and good power filtering.Great influence on the antenna module reception, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor.The length of the antenna 433M is about 17cm.Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high pressure, and interference source.Frequency used to receive, decode and oscillation resistor should match with the transmitter.Receiver module parameters :1.Product Model: MX-05V2.Operating voltage: DC5V3.Quiescent Current: 4MA4.Receiving frequency: 433.92MHZ5.Receiver sensitivity:-105DB 6.Size: 30 * 15 * 7mm7.External antenna: 32CM single core wire, wound into a spiral.Package Content : 3 x Transmitter module (433MHz) & 3 x Receiver module(433Mhz),Use antistatic bag to pack
Relay Transmitter Receiver 433 MHz Universal Wireless Remote Controls Switches DC 12V 4CH Relay Receiver Module with 4 Channels RF Remote Control
kaersishop
£11.64
Instructions:LED indicator informs about setting successfully . NOTES1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity.2. Please promptly change battery when remote control voltage is insufficient,  (when the battery voltage is insufficient, generally get close transmitting ) 3. Please pay attention to avoid metal mask,large equipment ,strong interference electromagnetic filed when using wireless RF products,and avoid too short distance between the remote control and receiver board .4. Please avoid abnormal using of the product.Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe .SPECIFICATION  1. Working Voltage:DC12V2. Quiescent Current:5mA 3. Working Frequency:433Mhz4. Receiving Sensitivity:-104dBm5. Function option:Momentary/Toggle/Latched6. Modulation Mode:ASK7. Matching Mode: Intelligent Learning code8. Output Mode:Dry contact /Voltage output9. Shell:Yes10. Working temperature : -30~+8011. PCB dimension:68.2x48.2(mm) Positive pole inputGND -Negative pole input1-KC1 Normal Closed of relay(NC)2 -KC1 Common of relay&(COM)3-KC1 Normal Open of (NO)4 -KC3 Normal Closed of relay(NC)5-KC3 Common of relay(COM)6 -KC3 Normal Open of relay(NO)7 -KC2 Normal Closed of relay (NC)8-KC2 Common of relay(COM)9-KC2 Normal Open of relay(NO)10-KC4 Normal Closed of relayNC) 11 -KC4 Common of relay(COM)12; -KC4 Normal Open of relay(NO)When the relay is energized, NO and COM connected.Packing List:1 * Receiver Module ( KR1204-4) ( including shell)1 * Remote Control ( with battery)
HQRP Wired External Antenna 433Mhz GSM 2dbi SMA plug 3m with CMMB Patch Aerial for Spring Antenna Arduino Robot Wireless RF Transceiver Module CC1101 CC1101 433MHz plus HQRP UV Meter
HQRP
£4.45
HQRP® Compact GSM Antenna for Spring Antenna Arduino Robot Wireless RF Transceiver Module CC1101 CC1101 433MHz where high performance is required from a small size!HQRP® UV Radiation Meter: This meter shows you the level of UV radiation and helps you protect your eyes and skin from negative sunlight effect. The color of the meter changes from very light purple to dark purple depending on the intensity of the UV lighting. The darker the purple color is, the more intense is the UV lighing.
MagiDeal 1 Set 3DR Radio Telemetry Kit 433Mhz Module for APM 2.5 2.6 2.8 Pixhawk Flight Control Drone
MagiDeal
£19.99
Description: - Very small size, light weight, 433Mhz frequency band, Transparent serial link - Range of approx 1 mile with supplied aerial - Demonstrated range of several kilometers with a small omni aerial - Can be used with a bi-directional amplifier for even more range - MAVLink protocol framing and status reporting - Frequency hopping spread spectrum (FHSS) - Adaptive time division multiplexing (TDM) - Support for LBT and AFA - Configurable duty cycle - Built in error correcting code (can correct up to 25% data bit errors) - Open source firmware - AT commands for radio configuration - RT commands for remote radio configuration - Adaptive flow control when used with APM - Based on the HopeRF HM-TRP radio module, featuring an SiLabs Si1000 RF microcontroller - 3DR Radio Telemetry Kit 433Mhz Module Open source for APM 2.5 2.6 2.8 - The 3DR Radio is the ideal way to setup a telemetry connection between your APM and a ground stationSpecification: - Item Name: 3DR Radio Telemetry Module - Band: 433MHz - Receiver sensitivity: -117 dBm - Air data rates: up to 250kbps - Transmit power: up to 20dBm (100mW) - Antenna connectors: RP-SMA connector - Output Power: 100mW (20dBm), adjustable between 1-20dBm - Interface: Standard TTL UART - Connection status: LED indicatorsSize Chart:Radio telemetry air module size: Approx. 50 x 27 x 10mm/ 1.96 x 1.06 x 0.39inchRadio telemetry ground module size: Approx. 70 x 22 x 11mm/ 2.75 x 0.86 x 0.43inchPackage Includes:2 Pieces Aerial1 Piece Radio Telemetry Base Station (USB Connection)1 Piece Telemetry Transceiver (Pin Header)2 Pieces Cable Set1 Piece Connector
Magnetic Aerial / Antenna for gate automation and Alarm system remote controls 433Mhz with extra long 3m cable!!! Range: 150m-200m
Magnetic aerial
£9.80
Increase remote reception range up to 150m - 200m+ !!! 433Mhz AERIAL FOR GATE AUTOMATION and ALARM SYSTEMS!!! Working frequency - 400 - 480Mhz ( optimal at 433Mhz ) Woking distance - 150 - 200m. Bandwidth - ±3 Mhz Antenna gain - 3.0 dBi Base diameter - 3 cm. Total antenna height - 14.5 cm. Cable type - RG-174. Cable length - 3m. Connection model - Wire connection. Polarization mode - Vertical Power - 50 w. VSWR value - < 1.5 The Steel 90° mounting bracket comes with an aerial! Very simple 2 step installation!!! 1) Strip and connect inner conductor and braided shield to your control board or receiver. 2) Locate magnetic base aerial on some metal surface near receiver. Note: If you don't have a metal surface near by, please use the steel mounting bracket, which comes with an aerial!!! - Outdoor antenna with protective covering for receivers, provided with an extra long 3m RG-174 cable - Frequency: 400 - 480MhzMhz and Impedence: 50 Ohm Same day dispatch with tracking number!!! WE ARE TOTALLY COMMITTED TO 100% CUSTOMER SATISFACTION.