Aguaplast

beissier m56075 – aguaplast Fiber Tube 200 ml
Desconocido
£4.67
Aguaplast Fibra. Putty for covering and weeding dynamic cracks Replaces mesh and fibre tapes. Elastic and flexible, 200 ml.
aguaplast Putty Wood 125 ml 3558 Cherry
BEISSIER
£3.69
aguaplast putty wood 125 ml 3558 Cherry Manufacturer's: beissier
Stucco in POLVERE High Standard aguaplast
AGUAPLAST
£47.46
White powder of aguaplast is ideal for stucco, stuccature, restores of walls and ceilings New Shaving, paint or before the application of wallpaper. Its use also provides for the shaving of walls after removal of wallpaper or old paints or the filling of cracks and holes up to 10 mm in walls and ceilings and even filling of small holes on wood before verniciarlo. If worked wet, you can obtain of decorative finish. Available in various sizes.Features:It is put inside on building materials such as plaster, plaster, plasterboard, concrete, brick, wood and also above old paints, to obtain a fine finish, with grain size less than 200 micron.You get from the bottom surfaces, and consistent absorption of paint, therefore, no need fixative and it consumes less paint, it save time and prevent the descreening differences of sparkle or in the work of covers.Has an excellent adhesion, high cohesion, and hardness.It is breathable.Features a no raggruma, easy preparation and is ready to use.Easy to apply, creamy, spirit level easily, does not escape from under the blade.Has a long time of processing, up to 6 hours and a quick drying time, similar to other plaster from open time shorter.Has the windows to be ripassato when not yet dry.
Aguaplast 448B7 Standard Putty White (Powdered) for Cracks 5 kg
Desconocido
£16.35
Aquaplast Standard "Powder" 5 kg
beissier aguaplast Solo White Lightweight Stucco in Pasta riempe crevices 250 ml
AGUAPLAST
£5.57
Brand new packed. aguaplast the soloist and is useful for the filling of holes, cracks, holes. Repair of expanded polystyrene parts and rossoni in chalk. Features: The Soloist has an excellent capacita 'riempitiva with minimum weight. Applicable in any thickness. Not shrink, not Cala and smashes. Excellent fit over all types of surfaces. Does not require sanding. Very flexible. Dries quickly. It does not stain. Finish Very white. 250 ml. Processing time: without limit consumption: 1L/M (2)/mm. Quick drying time: according to the thickness spatula or clean trowel with water paintable: just dry application temperature: from 5 to 35 °C Lavender Scented stucco application: Ready to use. Before application clean from debris and dust surfaces from grouted. Soak the surfaces very absorbent. Protect the any metal parts present on the surface. Before application, in the case turns slightly dry, and the convenient moisten the product with water amalgamandolo again with the spatula.
beissier aguaplast Fiberlite Stucco in Pasta fibrate Reinforced X Crepe 750 ml
AGUAPLAST
£14.72
Brand new packed. aguaplast Fiberlite and reinforced fibres this is one stucco in pasta useful for close slots of readjustment dynamic on plaster, concrete, plaster, wood, etc. Replaces the background gauze. Features: Fiberlite and is flexible, elastic, very slim fit. Does not require the use of network or gauze of background in large cracks. And it is water resistant and ageing. 750 ml. Processing time limit: without drying time: 2 to 4 hours (20 °C) paintable: After the full drying spatula or trowel cleaning: With water application temperature: 5 to 35 °C Application: amalgamate the product in the jar before use. Spread the product with spatula. It is not a product of filling, and it is applicable only in surface. For the filling of large slots use aguaplast High filling inside repairer or aguaplast Super outside. Do not apply on damp surface. Restore Weak surfaces before applying aguaplast Fiberlite. Before spraying, we recommend to apply on Fiberlite A Fund of masking tape.
beissier m107334 – aguaplast Standard Top Jar 500 g
Beissier
£2.78
Fill all the cracks in your home with the purchase of this tub of Aguaplast.Putty ready to use.Contains 500 grammes, which will leave your walls smooth and like new.Very easy to use and prepare.Putty ready for indoors.Leveller and crack filler.Very smooth and hard finish.Uses: smooth and fill textured surfaces, patch surface defects on cement, stone, plaster or wood.
Stucco bianco in pasta AGUAPLAST ALTO STANDARD vari formati - KG.1
Pennelli Boldrini
£4.30
INDICATO PER ' Rasatura, stuccatura e preparazione di pareti e soffitti nuovi da verniciare o prima dell'applicazione di carta da parati. ' Rasatura di pareti dopo la rimozione di carta da parati o vecchie pitture. ' Riempimento di fessure e buchi fino a 10mm in muri e soffitti. ' Riempimento di piccoli buchi su legno prima di verniciarlo. ' Ottenere finiture decorative se lavorato umido con rullo o altro attrezzo decorativo. CARATTERISTICHE ' Applicabile all'interno su materiali edili come intonaco, gesso, cartongesso, cemento, laterizio, legno' e anche sopra vecchie pitture, per ottenere una finitura fine, con granulometria inferiore a 200 micron. ' Si ottengono superfici dal basso ed omogeneo assorbimento di pittura, quindi, non serve fissativo e si consuma meno pittura, si risparmia tempo e si evitano le differenze di brillantezza o gli ombreggiamenti nel lavoro di pitturazione. ' Eccellente aderenza, alta coesione e durezza. Traspirante. ' Di facile preparazione, non raggruma. Uso immediato. ' Facile da applicare, cremoso, si livella facilmente, non sfugge da sotto la lama. ' Lungo tempo di lavorazione, fino a 6 ore. Tempo di essiccazione rapido, simile ad altri stucchi dal tempo aperto più corto. ' Lavorabile bagnato su bagnato. Possibilitá di essere ripassato quando non ancora asciutto.Spessore: da 0 fino a 2 mm Consumo: 1,75 Kg. / mq / mm Rapporto acqua / Kg di polvere: pronto all'uso Tempo di lavorazione: senza limite Tempo di essiccazione: Alto Standard Pasta: 24 ore per mm di spessore. Alto standar Istantaneo 200 ml: 10-15 minuti Verniciabile: dopo essiccazione completa
Stucco in polvere ad alte prestazioni AGUAPLAST ALTO STANDARD vari formati - KG.5
Pennelli Boldrini
£11.65
INDICATO PER ' Rasatura, stuccatura e preparazione di pareti e soffitti nuovi da verniciare o prima dell'applicazione di carta da parati. ' Rasatura di pareti dopo la rimozione di carta da parati o vecchie pitture. ' Riempimento di fessure e buchi fino a 10mm in muri e soffitti. ' Riempimento di piccoli buchi su legno prima di verniciarlo. ' Ottenere finiture decorative se lavorato umido con rullo o altro attrezzo decorativo. CARATTERISTICHE ' Applicabile all'interno su materiali edili come intonaco, gesso, cartongesso, cemento, laterizio, legno' e anche sopra vecchie pitture, per ottenere una finitura fine, con granulometria inferiore a 200 micron. ' Si ottengono superfici dal basso ed omogeneo assorbimento di pittura, quindi, non serve fissativo e si consuma meno pittura, si risparmia tempo e si evitano le differenze di brillantezza o gli ombreggiamenti nel lavoro di pitturazione. ' Eccellente aderenza, alta coesione e durezza. Traspirante. ' Di facile preparazione, non raggruma. Uso immediato. ' Facile da applicare, cremoso, si livella facilmente, non sfugge da sotto la lama. ' Lungo tempo di lavorazione, fino a 6 ore. Tempo di essiccazione rapido, simile ad altri stucchi dal tempo aperto più corto. ' Lavorabile bagnato su bagnato. Possibilitá di essere ripassato quando non ancora asciutto. Spessore: da 0 fino a 10 mm Consumo: 1,1 Kg. / mq / mm Rapporto acqua / Kg di polvere: 0,5 L Tempo di lavorazione: fino a 6 ore Tempo di essiccazione: 30 minuti in spessore da 0,2 mm 2 ore in spessore da 1 mm Verniciabile: dopo essiccazione completa .
beissier aguaplast SR5 Stucco Textured White Powder 1.5 kg x Shaves Holes Cracks
AGUAPLAST
£12.28
Brand new packed. aguaplast SR5 it is useful for: Shaving of sides to obtain a finish of high quality, hardness and flexibility, filling and repair of holes and cracks even in high thicknesses without falling, in hand, one restoration of sides and building manufactured outside, repair of windowsills and balconies. On the box of the product are given the features, the application and storage. Size: 1.5 kg. Product Features: - Breathable - Rough Finish, similar to the plaster - Paintable directly after 48 hours from application without causing discolourations of colour - excellent adhesion, high cohesion, and hardness - fibres, resistant to thermal in outside and wide to cavillature - Immediate Use and time of lavorabilita ' - Easy to apply, easily level - dilution ratio: 0.25 l/kg - lavorabilita 'Time 2 hours - fast drying time in the thickness - carteggiabile/Paintable function: after 48 hours from application - Consumption: 1.5 kg/m (2)/mm - Temperature of use: 5 - 35 °C - Do not apply on media in the presence of humidity' Permanent
XYLADECOR 5089084 Colourless Oil for Teak Xyladecor
Xyladecor
£8.17
Everything you need to paint your walls or facades, in the most practical and simple way.
Torta Wool Steel Media 150 gr
BARLESA, S.L.
£2.07
This item is new and is served with manufacturer's original packaging.The price for the sale of this article is for a pack of 1 unit. The manufacturer of the product is barlesa, S.L. is the manufacturer of this product code 2292.
Motip Paint – Fly Spray Ral 3020 Brightness Red Traffic (Pot 200 ML
Motip
£2.34
Everything needed to paint your walls or facades of the more practical and easy way.
Stucco bianco in polvere AGUAPLAST MONT BLANC bianco vari formati - KG.15
Pennelli Boldrini
£20.52
Rasa: finitura molto liscia bianchissima e fine Ricopre: vecchie pitture assorbenti e supporti scabri. Grande aderenza su supporti in laterizio,intonaco,legno,cartongesso,cemento ecc... Riempie: applicabile in spessori da 0 mm. fino ad oltre 10 mm. Risparmia: non serve fissativo, risparmi tempo e pittura Rapido; facile da applicare e carteggiare. Tempo di essiccazione rapido Spessore: da 0 ad oltre 10 mm Consumo: 1 Kg. / mq mm Rapporto acqua / Kg di polvere: 0,5 L Tempo di lavorazione: 4 ore Tempo di essiccazione: rapido. Da 2 a 4 ore per mm di spessore Verniciabile: dopo essiccazione completa
Putty Restauracion aguaplast Finishes Interior 1341 1 kg
Aguaplast
£0.86
Special smoothed for very fine. Final Preparation for Fine Work where termination is required a great quality as satin paints, papers, vinílicos. . . /AS FINAL layer after repair or renew the wall with other plastes of filling. /Ideal for large surfaces for your long time working. /provides a very fine finish, with an excellent termination for decorating. /Colour: White. /Interior.
aguaplast Rapid Fill kg.1 Pasta – Stucco in Pasta Effect Plaster, Paintable in 30 Min, Ideal for Closure Holes, Holes and Crepe
PENNELLI BOLDRINI AMEDEO
£11.60
Specifically developed for the quick filling and painting of flowers of anchorage of scaffolding in front. The applicator can paint directly the gauging without that create variations of colour. Applicable both inside and outside.
Aguaplast 2282- Wood Filler, 125 ml, Walnut Colour
BEISSIER
£3.69
Aguaplast Wood Filler 125 ml 2282 Walnut O from the Manufacturer: Beissier
aguaplast High riemp kg.1 Pasta
PENNELLI BOLDRINI AMEDEO
£22.20
Indicated for • Filling and preparation of media in wood. • For levelling to eliminate imperfections, cracks, holes, etc... • Irregular of media. • Repair and designer of decorative elements in plaster and polystyrene. Features • Excellent grip on wood, anchor, plaster, plaster, concrete, brick, polystyrene, old paints, etc • Reinforced with glass fibre, ideal for filling holes and repairing slots on wood. • Excellent 'filler up to 20 mm capacity. Minimum withdrawal. • White smooth finish. With paintable water dyes or universal Max. 5%. • Can be covered with any type of paint, varnish, etc • In Outdoor Applications It is advisable to protect with the paint.