AIM Solder

AIM Solder SN100C-GLOW-032-2.5%-1 Glow Core No-Clean Wire Solder, 1lb Spool
stanleysupply
£96.86
Glow Core is a no-clean, resin-based flux cored wire solder designed to offer excellent wetting characteristics and lead-free compatibility. This product is very active and is recommended for fast cycle time soldering. Glow Core flux promotes good thermal transfer, offering better solder penetration into plated through holes or surface mount interconnections. Glow Core cored wire produces low-to-medium post-process residues that are electrically safe and do not require cleaning for most applications.
AIM Solder SAC305-GLOW-2.5%-020-1 Glow Core No-Clean Wire Solder, 1lb Spool
stanleysupply
£129.47
Glow Core is a no-clean, resin-based flux cored wire solder designed to offer excellent wetting characteristics and lead-free compatibility. This product is very active and is recommended for fast cycle time soldering. Glow Core flux promotes good thermal transfer, offering better solder penetration into plated through holes or surface mount interconnections. Glow Core cored wire produces low-to-medium post-process residues that are electrically safe and do not require cleaning for most applications.
AIM Solder SN100C-WS482-032-3%-1 Water-Soluble Wire Solder, 1lb Spool
stanleysupply
£122.71
Alloy: Sn100C Diameter: .032 Flux %: 3% Flux Type: Water-Soluble Lead-Free: Yes
Electric Vacuum Desolder Solder Sucker Desoldering Pump Welding Tools Manual Remover Tackle Electric Iron Alloy Strong Suction
Askdasu
£4.51
Description:This desoldering tool is made of plastic material, high temperature resistant nozzle, durable and practicalSmall and portable, easy to operateFeatures with long handle, comfortable to holdLight weight, in order to reduce fatigue, powerful suction to remove solder quickly. It will help you complete the task quickly and safelyThis is a good desoldering tool for hobbies, kits, radios, or electronic workSpecification:Material: PlasticColor: blue and yellowLength:Approx. 32-33cm/12.60-12.99inchQuantity: 1pcOperation procedure:Step 1. Push the set-knob for loading the cleaned shaft until the knob stopsStep 2. Melt the solder where it is intended to removeStep 3. Aim the nozzle to the melted solder and then push the release button, thus the solder can be suckedStep 4. Press the release button while pushing the setknob without reloading the cylinderStep 5. Push the set-knob and then pull the protector, then load mechanism is releasedPackage Included:1 x Desoldering Pump Sucker SolderNotes: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-3cm measuring deviation due to manual measurement.
KKmoon Auto Darkening Welding Filter Lens for Welding Helmet
KKmoon
£9.99
This filter for the lens of the soldering iron of the mask of darkening welding helmet is the objective of welding to high quality auto dimming with UV protection function, very comfortable and efficient and easy to use. Technical Specifications: Material: PP + LCD Black Light State: DIN 4 Darkness: from DIN 9 to DIN 13 Dark Adjustment: adjustment Internal, 9/11/13 Switching Time (Light to Dark): 1/10000s (normal temperature) Delay Time (Dark to Bright): 0.2 seconds UV/IR protection: DIN15 levels Power supply: Dry 3 A batteries (replaceable) Battery: 2 AAA 1.5 V batteries (not included) Arc Sensor: Pack of 1 Application: Argon MiG/TIG/ARC/ARC welding/welding gas Operation Temperature: -10 ℃ ~ 65 ℃ (14 ℉ ~ 149 ℉) Storage Temperature: -20 ℃ ~ 70 ℃ (-4 ℉ ~ 158 ℉) Active Viewing Area: 90 * 33 mm Filter cassette size: 110 * 90 * 9 mm/4.33 * 3,54 * 0.35 inch The drawer of the filter Weight: 63 g/2.23oz Package size: 11.3 * 9.3 * 1 cm/4.45 * 3.66 * 0.39 inch Package weight: 65 g/2.31oz Packet list: 1 * Car that dark the objective of welding
Zero LiPo - The tiny little LiPo/LiIon power supply shim for all versions of Raspberry Pi!
Pimoroni
£12.99
Everyone loves mobile projects but having a discrete, slick, and tidy power supply solution is always tricky. LiPo SHIM (formerly known as Zero LiPo) aims to give you the most compact Raspberry Pi power supply possible.You can either solder the 0.8mm thick PCB directly onto the GPIO pins on your Pi for a permanent solution, or solder on the provided 2x6 0.1" female header which will allow you to remove your Zero LiPo at any time (but will block the GPIO pins).They use the TPS61232 step-up boost converter from Texas Instruments that offers up to 96% efficiency. The board includes power on and battery low indicator LEDs. During shutdown (due to under-voltage or external selection) the quiescent current is just 15uA sip.Note: This product requires some solderingNote: Battery and Raspberry Pi not included.Compatible with Raspberry Pi 3, 2, B+, A+, Zero, and Zero W0.8mm thick PCBShaped to sit as low as possible on the Raspberry Pi2-pole JST connector ideal for most LiPo/LiIon batteriesPower and low battery LED indicatorsSupplies up to 1.5A continuous current (15uA quiescent current)Low battery warning at 3.4V (asserts GPIO #4 low)Automatic shutdown at 3.0V to protect your batteryVBAT+, GND, and EN pins available to break out2x6 0.1" female header (optional, for non permanent installation)Includes rubber foot to space LiPo SHIM away from your Raspberry Pi
Hi-Spec 100W (0.8A) Soldering Gun Set with 480°C (900°F) Maximum Temperature for Plumbing, Electronics, Circuit Boards, Crafting, Automotive, Metalwork & Industrial Applications Soldering Gun Kit
Hi-Spec Products
£14.99
Ready, Aim, Solder!Raise the bar in your soldering projects with a tool that is up to the job - this 100w glue is great for soldering enthusiast looking for a high-temp tool in plumbing, electronics, crafting, automotive, metalwork and even wood burning tasks✅ High Maximum Temperature capable of performing heavy duty soldering tasks✅ Fast Heat-Up Time reduces overall project time✅ Gun and Trigger design easy to hold for maximum precision during tasks✅ Bright forward facing light bulb illuminates dark and low-lit work spacesContents♦100W Soldering gun0.8A - Light Bulb Headlight - Trigger switch - 1.4m Cord/3-Pin♦2 x Soldering TipsTips can be replacement when worn down or cycled during cleaning♦Soldering Reel 10g(0.35oz)For general use in soldering tasks for creating a strong bond♦Soldering Flux 10g (0.35oz)For ensuring a strong join by removing oxidation, dirt and oil at joins for an even stronger bondTechnical Specification 230V, 50HZ, 0.8A Cable length: 1.4m Light: 2.2V, 0.25ACord: 2m, 3-PinTemperature (Max): 900°F (480°C)- Fulfilled By Amazon: Free returns for items within 30 days of shipment receipt- Hi-Spec Warranty: All our products meet international standards of testing and are guaranteed against defects in design, material and workmanship
Laser 2297 Solder Tube Dispenser
The Tool Connection Ltd.
£3.03
A neat and handy tube dispenser holding solder for emergency repairs etc.
RDPSA Vacuum Desolder Solder Sucker Desoldering Pump Welding Tools Manual Remover Tackle Electric Iron Alloy Strong Suction
RDPSA
£6.99
Description: This desoldering tool is made of plastic material, high temperature resistant nozzle, durable and practical Small and portable, easy to operate Features with long handle, comfortable to hold Light weight, in order to reduce fatigue, powerful suction to remove solder quickly. It will help you complete the task quickly and safely This is a good desoldering tool for hobbies, kits, radios, or electronic work Specification: Material: Plastic Color: blue and yellow Length:Approx. 32-33cm/12.60-12.99inch Quantity: 1pc Operation procedure: Step 1. Push the set-knob for loading the cleaned shaft until the knob stops Step 2. Melt the solder where it is intended to remove Step 3. Aim the nozzle to the melted solder and then push the release button, thus the solder can be sucked Step 4. Press the release button while pushing the setknob without reloading the cylinder Step 5. Push the set-knob and then pull the protector, then load mechanism is released Package Included: 1 x Desoldering Pump Sucker Solder Notes: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-3cm measuring deviation due to manual measurement.
Cordless Butane Gas Powered Soldering Iron Pen Shaped Tool - Blue
Orientalonline1
£3.71
The DIY best hand tool, the pocket miniature welding torch 3 gather 1 durable gas ,iron group, uses in the welding and the general home use service. Uses the butagas to make the fuel the welding tool, this product volume is small, the safety coefficient is high, is advantageous for repairmens body carrying is visits to repair the service ideal tool, the depth is welcome the user. The welding torch uses the special alloy spray nozzle, the refractory ceramics protective covering, may produce the high temperature flame, uses in disassembling the laminated primary device, the flame adjustable. Is aims at specially plays the multi-purpose welding torches which the family or the DIY amateur designs. According to welds deals with people the size to be possible in 1--in 3 minutes completes the welding, 20℃ above may weld the diameter very fast in the normal temperature 6--16 millimeters copper pipes, the temperature power is equal to receives a telegram generally the type 30W-70W electricity welding torch. Dimension: 130*20mm (LxD) Weight: 78g Material: Plastic and metal
Vacuum De-Solder Gun Desoldering Pump Solder Sucker Removal Remover Tackle
WSDF
£3.99
Description:This desoldering tool is made of plastic material, high temperature resistant nozzle, durable and practicalSmall and portable, easy to operateFeatures with long handle, comfortable to holdLight weight, in order to reduce fatigue, powerful suction to remove solder quickly. It will help you complete the task quickly and safelyThis is a good desoldering tool for hobbies, kits, radios, or electronic workSpecification:Material: PlasticColor: blue and yellowLength:Approx. 32-33cm/12.60-12.99inchQuantity: 1pcOperation procedure:Step 1. Push the set-knob for loading the cleaned shaft until the knob stopsStep 2. Melt the solder where it is intended to removeStep 3. Aim the nozzle to the melted solder and then push the release button, thus the solder can be suckedStep 4. Press the release button while pushing the setknob without reloading the cylinderStep 5. Push the set-knob and then pull the protector, then load mechanism is releasedPackage Included:1 x Desoldering Pump Sucker SolderNotes: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-3cm measuring deviation due to manual measurement.
Vacuum De-Solder Gun Desoldering Pump Solder Sucker Removal Remover Tackle
Behavetw
£3.99
Description:This desoldering tool is made of plastic material, high temperature resistant nozzle, durable and practicalSmall and portable, easy to operateFeatures with long handle, comfortable to holdLight weight, in order to reduce fatigue, powerful suction to remove solder quickly. It will help you complete the task quickly and safelyThis is a good desoldering tool for hobbies, kits, radios, or electronic workSpecification:Material: PlasticColor: blue and yellowLength:Approx. 32-33cm/12.60-12.99inchQuantity: 1pcOperation procedure:Step 1. Push the set-knob for loading the cleaned shaft until the knob stopsStep 2. Melt the solder where it is intended to removeStep 3. Aim the nozzle to the melted solder and then push the release button, thus the solder can be suckedStep 4. Press the release button while pushing the setknob without reloading the cylinderStep 5. Push the set-knob and then pull the protector, then load mechanism is releasedPackage Included:1 x Desoldering Pump Sucker SolderNotes: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-3cm measuring deviation due to manual measurement.
Dabixx Desoldering Solder Sucker Soldering Pump Suction Tin Gun Vacuum Removal Tool
Dabixx
£3.84
Features: The Desoldering pump comes with high vacuum force especially made for clearing circuit boards in rework jobs and field repair Piston with double oil seals:no air leakage guarantee Soft handle delivers comfortable grip and non-silp function Anti-rust spring Compact size Built-in tip for easy replacement Quick and easy solder residue clearance How to use: Push Set-knob for loading until the knob stops Melt the solder with an iron where it is intend to remove Please aim the nozzle to melted solder and push release button Specifications: Material: ABS Color: Black Length: Approx. 210mm/8.27" Quantity: 1 Pc Note: 1. Transition: 1cm=10mm=0.39inch 2. Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid. 3. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! No Retail Package
Werse Manual Solder Sucker Desoldering High Vacuum Pump Irons Removal Remover Tool
Werse
£6.33
Features : The Desoldering pump comes with high vacuum force especially made for clearing circuit boards in rework jobs and field repair. Piston with double oil seals:no air leakage guarantee. Soft handle delivers comfortable grip and non-silp function. Compact size. Anti-rust spring. Built-in tip for easy replacement. Quick and easy solder residue clearance. Specification : Color: Green + Black Material: Stainless Steel, Plastic Item Size: Approx. 21 x 2.6cm Weight: 83g How to use: 1.Push Set-knob for loading until the knob stops 2.Melt the solder with an iron where it is intend to remove 3.Please aim the nozzle to melted solder and push release button Package includeds : 1 x Suction Tin Details pictures :
Vacuum Desolder Solder Sucker Desoldering Pump Welding Tools Manual Remover Tackle Electric Iron Alloy Strong Suction
SDYDAY
£3.99
Description:This desoldering tool is made of plastic material, high temperature resistant nozzle, durable and practicalSmall and portable, easy to operateFeatures with long handle, comfortable to holdLight weight, in order to reduce fatigue, powerful suction to remove solder quickly. It will help you complete the task quickly and safelyThis is a good desoldering tool for hobbies, kits, radios, or electronic workSpecification:Material: PlasticColor: blue and yellowLength:Approx. 32-33cm/12.60-12.99inchQuantity: 1pcOperation procedure:Step 1. Push the set-knob for loading the cleaned shaft until the knob stopsStep 2. Melt the solder where it is intended to removeStep 3. Aim the nozzle to the melted solder and then push the release button, thus the solder can be suckedStep 4. Press the release button while pushing the setknob without reloading the cylinderStep 5. Push the set-knob and then pull the protector, then load mechanism is releasedPackage Included:1 x Desoldering Pump Sucker SolderNotes: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-3cm measuring deviation due to manual measurement.
Solder Sucker, Vacuum De-Solder Gun Desoldering Pump Solder Sucker Removal Manual Remover Tackle
GEZICHTA
£4.12
Description:This desoldering tool is made of plastic material, high temperature resistant nozzle, durable and practicalSmall and portable, easy to operateFeatures with long handle, comfortable to holdLight weight, in order to reduce fatigue, powerful suction to remove solder quickly. It will help you complete the task quickly and safelyThis is a good desoldering tool for hobbies, kits, radios, or electronic workSpecification:Material: PlasticColor: blue and yellowLength:Approx. 32-33cm/12.60-12.99inchQuantity: 1pcOperation procedure:Step 1. Push the set-knob for loading the cleaned shaft until the knob stopsStep 2. Melt the solder where it is intended to removeStep 3. Aim the nozzle to the melted solder and then push the release button, thus the solder can be suckedStep 4. Press the release button while pushing the setknob without reloading the cylinderStep 5. Push the set-knob and then pull the protector, then load mechanism is releasedPackage Included:1 x Desoldering Pump Sucker SolderNotes: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-3cm measuring deviation due to manual measurement.
Laser 3497 Soldering Aid Tool
The Tool Connection Ltd.
£15.96
Designed for holding two wires while they are soldered. On certain electrical systems it is not possible to use connectors as this creates resistance therefore the wires need to be soldered. A specific application is car alarms.