About the productVery popular drilling burr tools used by Jewelry Designers for drilling holes in Beach Sea Glasses, Stones, Rocks for making Necklaces, Earrings, Pendants and Bracelets. Aiskaer tools have multiple layers of fine industrial diamond particles bonded to the tips which provides for longer drill life. Aiskaer tools are excellent for drilling through materials up to 1/2" thick.Product Features:Quantity:1mm 20pcs 2mm 20pcs 3mm 20pcs1/8 inches ShankThe total length of 1.77 inchesPlastic box packaging, easy to carry and storeCan drill Beach Sea Glass, Sea Shells, Rocks, Marbles, etc.ATTENTION: DO NOT RUN DRYWet drilling only. These are delicate, very small diameter diamond drill bits. The diamond coating is very thin. Can not take any abuse.Start the hole at an angle. While holding the drill in hand, carefully move the drill around just enough to ream out the sides of the hole. Let the tool do the work.Package include:1mm 20pcs 2mm 20pcs 3mm 20pcs
Diamond Drill Bits, are also know as Diamond Core Drill Bits, Diamond Hole Saws or Bonded Diamond Drill Bits. They are often called Glass Drill or Tile Drill, but they are much more versatile since they are used to drill glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone, and fiberglass. Features: - This is a brand new product - This diamond bit core drilling removes a complete circle glass, tiles, marble, granite, ceramic or other material and only needs water for lubrication - Can be used with a standard electric drill (not included) - Easy to use, high quality, good performance, long life - Excellent for making clean and accurate hole on glass, tile and marble - Always use lubricant (water), otherwise the diamond core drill will burn - Start the hole diagonally, make a round trace and then hold drill straight Size: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 20mm, 25mm, 30mm, 40mm Note: If you smell burning, back off! Either your speed is too high or the pressure you're applying is too much. You're drill bit should never be hot to the touch, not even warm. - Slowest speed - Coolant - Minimum pressure The general rule is the smaller the diameter of your drill bit, the faster drill speed you can use. The harder your material, the slower drill speed you should use. Packaged included: 15pcs Diamond Coated Hole Saw Drill Bits
Use for Ceramic Tiles, Mirror and Glass Once through the tile or mirror this drill bit will cope easily with any Masonry behind it. If using on Floor tiles, regularly lubricate the bit with water to keep it cool,and working to its best. Glass and tile drill bits provide smooth and accurate drilling in ceramic tiles, marble, china, mirrors and glass. Ideal for drilling fastner holes in bathroom tiles, or wall mirrors Titanium coated for durable and longer life Size: Shank diameter：3.1mm, 4.0mm, 4.3mm, 5.3mm, 6.9mm, 7.7mm Cutter diameter: 4mm, 5mm, 6mm, 8mm, 10mm Total length: 65mm, 69mm, 72mm, 77mm, 81mm, 85mm Package Included: 6 X Drill bit
Notice: Undefined property: stdClass::$Manufacturer in /var/www/vhosts/wundr-shop.it/httpdocs/QualitTradeTools/brand/content.php on line 145
These bits are a very popular type and size used by Jewelry Designers for drilling a nice clean hole in Beach Sea Glass for making Earrings, Pendents and Bracelets. They have multiple layers of industrial diamond particles bonded to the tips which provides for longer drill life and are excellent for drilling completely through any thickness of Beach Sea Glass up to 1/2" thick. These Bits can be used in any high speed Dremel-Type Rotary Tool or Small Precision Drill Press with a 3/32" collet or adjustable collet.
Feature: 1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information; 2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed. 3.Diamond material, fits drills, flex shafts and dremels. 4.Used by Jewelry Designers for drilling clean holes. 5.Drills Beach Sea , Sea Shells, Rocks, Marbles, etc. 6.Must be used with care, submerged in a little pool of water. Specification: Material: Metal, Diamond Color: Silver Brand name: BQLZR Shank Diameter: 2.3MM Head Diameter: 1mm Sand length: 6-8MM Full length: 42mm Dimension: 2.3 x 42mm/0.09 x 1.65"(Dia x L) Weight: 120g Package Include: 100 x Diamond Coated Drill Bit
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration. TOOGOO(R) 20PCS 2mm Diamond Coated Hole Saw Solid Drill Bit For Glass Tile Ceramic Marble Head Diameter: 2.0mmcolor: Silver&gray Shank diameter: 2.35mmTotal length: 450mm, can drill 10mm depthPackage Included: 20x twist drillNote: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Features:1. Made of high quality steel, is durable and useful leather craft tool2. Four sizes 1/2/4/6 prong for choosing, easy and convenient to use3. With anti-slip handles, they are more exquisite, sharp, and hardness enhance4. Widely use in punch holes in a precise diamond shape that is optimal for stitching leather5. It is better to use the tool with soft pad to protect sharp chise teeth as it is expendable Specification:Material: high quality steelProng width: Approx 2mmProng pitch: Approx 4mmLength: Approx 10cmThe 1 Prong is mainly used for bending of the leather right angles, or to use when it is perforated on leather alone to use.The 2 Prong is usually used for bending of leather curves or to make leather of small pieces.The 4 Prong is used for the straight line drill of the leather. It is widely usedThe 6 Prong can be used in playing a straight line, it can hit six holes and is efficientPackage includes:1 Prong+2 Prong+4 Prong+6 ProngThe Punch Tool is consumable, it is like blade, scissors is used for a long time will be slow, The customers must pay attention to the following points when using:1.In order to prevent the interrupt Prong tooth When you punch it, it must be perpendicular to the epidermis.2. When useing the leather hammer to beat Prong, pay attention to the strength of your hands, first light and back heavy.3 .Please be sure to cooperate with the rubber gasket, which is good protection for the cutting teeth and gasket when the punching for eather.4.You can use oil or oil for Prong for protection and maintenance when you don't use Prong.
Features:1. Made of high quality steel, is durable and useful leather craft tool2. Four sizes 1/2/4/6 prong for choosing, easy and convenient to use3. With anti-slip handles, they are more exquisite, sharp, and hardness enhance4. Widely use in punch holes in a precise diamond shape that is optimal for stitching leather5. It is better to use the tool with soft pad to protect sharp chise teeth as it is expendable Specification:Material: high quality steelProng width: Approx 1.5mmProng pitch: Approx 3mmLength: Approx 10cm Weight per set:Each set Weight: 0.3 poundsColor: Black Package includes:1 Prong+2 Prong+4 Prong+6 Prong Notice:1. Must be perpendicular to the perforated leather, tilt and interrupted cut to prevent tooth2. Don't beat it with heavy hammer, you can use plastic hammer or nylon hammer3. Use the tool with soft cushion to protect the cut tip, such as outrageous board or open plate4. When not in use, can be coated with a layer of oil between the cut, put protective sleeve to do with the maintenance
Note: The color of the item may vary slightly due to photography and your own computer Feature: This diamond coated core drill bit removes a complete circle from tile, ceramic or other materials and only needs water for lubrication. Excellent for making clean and accurate hole on tile . High quality and long life span. Start your hole diagonally, make a round trace and then hold drill straight. Add water for coolant and drill slowly. Safety instructions: 1. Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed． 2. The bladed product is not use for people under 18 years. 3. The item is only for industrial cutting/engraving, not hazardous article Specification: Material:Metal,Diamond Color:Silver Shank Diameter: 2.3MM Head Diameter: 1mm Sand length: 6-8MM Full length: 42mm Dimension:2.3 x 42mm/0.09 x 1.65"(Dia x L) Weight:24g Note:There would be some deviation. Package Include: 20 x Diamond Coated Hole Saw Drills
Product Specifications:Material: PE Plastic.Can be extended up to 180cm long.Can be clipped on any surface (thickness less than 5cm).Dimension: Approx. 19 x 13.5 x 5.5 cm (not extended).Weight: Approx. 380g.Package Includes:1 x Table Tennis Net
Spare Parts for Syma X5 X5C X5C-1 Main Blade Propeller & Propeller Protectors Blades Frame & Landing Skid product properties: Color: White,Black,Red,Blue ,green Quantity: 5 sets, each corresponding to a color Material: high strength plastic (not easy to break) Ultra durable & light weight,completely compatible for Syma X5 X5C X5C-1 RC Quadcopter. Package included: 20x Propellers (4 White & 4 Black & 4 Red & 4 Blue & 4 Green) 20x Propeller Protectors (4 White & 4 Black & 4 Red & 4 Blue & 4 Green) 10x Landing Skids (2 White & 2 Black & 2 Red & 2 Blue & 2 Green) 40x Mounting Screws(20pcs for props and 20pcs for blade frame)
Feature: 1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information; 2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed. 3.High quality,durable use. 4.Great tools for making an accurate hole on various bowlder, agates, pearls, jade, etc. 5.Use Tip:Light pressure, diamond tools are processed by grinding the workpiece, If use too muchstrength, flour is not easy to rule out, especially the small tools is also easy to damage. Safety instructions: 1. Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed． 2. The bladed product is not use for people under 18 years. 3. The item is only for industrial cutting/engraving, not hazardous article Specifications: Material: Diamond+Steel Color: Silver Brand Name: BQLZR Shank Diameter: 2.35mm/0.09" Head Diameter: 2mm/0.08" Sand length: About 17mm/0.67" Full length: Approx. 43mm/1.69" Size: 43 x 2.35MM/1.69x0.09"( L x Dia) Weight:13g Package Include: 10 x Diamond Coated Hole Saw Drill Bits
Feature: Diamond set is perfect for use with your highspeed drilling or grinding tool. diamond point bit set in a protective plastic case, can be used for a variety of hole making and grinding tasks in glass, ceramic, and stone. Diamond coated bur set with 3mm shanks Bits come in standard size to satisfy any technology. Specification: Material:Diamond,Metal Color:Silver Shank Diameter:3mm Head Diameter:2mm Size:150 # Length:45mm Package Size:14.3 x 6 x 2cm/5.63 x 2.36 x 0.79"(L x W x H) Weight:104g Package Include: 30 x Diamond Coated Burrs Glass Drill Bit
About ProductsThis Beautiful Collection of 16 High Quality NEW Faceted Clear Teardrop crystal Glass Prisms can be used for chandelier pendants, Christmas tree decorations, Weddings, Jewelry Making, Craft Project and Art. Each Prism measures 2" which includes the top jewel octagon piece and has a total hang of appx 3"s. Connectors are Silver Open Eye Pinning.SpecificationName: Aiskaer "Angel Tears" crystal glass pendantsColor:ClearSpecification:Teardrop Crystal(50mm)+ 2 octagonal beads(14mm)Material:All pendants,100% fine crystal glass, not acrylic material!(Pay attention to identify)Note:quality product from Aiskaer Co Ltd.,products are crafted from high-quality crystal glass,it is not acrylic or plastic.Each glass pendant we are carefully packaged separately to avoid damage caused during shipment, and we are committed to providing the best service and the best products for every customer.
Product Features:1.Size：30mm.Color:Black;Total Weight:0.2 lbs2. Made by durable solid steel;The blade is sharp and very durable3. It is practical tools for leather craft,Looks great,you will like it 4. Suitable for wallet, card package,Belt Strap etc. These make it very easy to get a nice V-Shaped end on the leather.5. High-end Professional tools for leather craft working.Suitable for beginners and professionsProduct Specifications:1.Size:30mm2.Length: 5 inches3.Total weight: 0.2 lbs4.Color: Black5.Material: High-quality steelPackage includes:1 Pcs Leather V-shaped Punch（40mm)Product Use and Preservation:1.When the product is manufactured, it is sealed with white wax. Please remove the white wax when using for the first time.2. When useing the leather hammer to beat V-shaped Punch, pay attention to the strength of your hands, first light and back heavy.3 .Please be sure to cooperate with the rubber gasket, which is good protection for the cutting teeth and gasket when the punching for eather.4.You can use oil or oil for V-shaped Punch for protection and maintenance when you don't use V-shaped Punch.