Suitable Adhesive for MDF, glass, metal, shoe, wood, chip wood, rubber, most plastics, leather and other common substrates. Especially suitable for the applications where cure speed needs to be accelerated. An adhesive set which consists of high viscosity cyanoacrylate adhesive and activator. High bonding strength. Suitable for use on vertical surfaces as it will not drip or slump. It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface. It is suitable for the bonding of a very wide range of materials, including acidic surfaces and some porous ones, where rapid bonding times are required. Although Akfix 705 has a degree of gap filling ability, it is generally recommended for use on close-fitting parts and fairly smooth, even surfaces.
Akfix All Bond MS High Tack is a MS polymer-based, one component, high quality and professional adhesive with high adhesive strength and initial tack. It is suitable for bonding heavy building materials without the use of clamps and/or fixing tape
10 Ausspritzdüsen Kartuschenspitzen Silicone Heads with Caps 100mm Standard - The x for 1 Set - 10 Kartuschenspitzen - Individual Customization an Fugenbreiten - Material: PVC - Universal Ausspritzdüsen/Kartuschenspitzen with Lock Cap, Approx. 100 Mm
Catalogue properties as D3 according to DIN EN 204. Excellent adhesion strength on hard and soft woods Water based Easy application Application Suitable for bonding all types of wood, wood and laminate planes. Wood on wood, soft and hard panels, synthetic resin panels and synthetic chipboard Suitable for fixing paper, cardboard, paper or PVC fabric to wood and cardboard. Can also be used to tie up outdoor wooden frames such as window frames and exterior doors. Particularly suitable for moisture-resistant bonds that must meet high needs.
1 Cartridges PU Mounting Adhesive Polyurethanes Basis Tall Adhesion frost-resistant Akfix 510 - The price is for 1 Kartusche.Eine cartridge is sufficient for about 15 meters. (Strip 5 mm Ø). - Material: Polyurethanes Basis - Recommended private as well as public use in indoor and Außenbereich.Besonders for bonding of products from polyurethane and other materials as well as panels, decor, insulation boards, ceiling profiles, plasterboard, wood, plastic, rigid PVC, MDF board, rubber , Natural stone, artificial stone, ceramic and concrete elements. - Instructions: The surface must be dust, grease and dirt. Fully as Caterpillar within maximum 2-3 minutes on one side adhesive. Non-slip liability after 15 minutes. Excess adhesive residues must be removed immediately with universal cleaner or acetone. Dried adhesive can be removed only in mechanical way. - Polyurethane Assembly adhesive with extremely high adhesion Akfix 510 cartridges 310 ml / 390 g.
Akfix 960 PU insulation composite system adhesive foam perimeter glue gun foam insulation Styrodur hard on Mplatten adhesive 12 x 800 ml Akfix 960 IS A Einkomponentiger polyurethane adhesive foam in aerosol cans. The curing uses outside of the tin, with the humidity, or why not consider the moisture from underground. Is ideal for quick and heavy duty sticking building materials and most of all for the installation of insulation board (XPS EPS). Features: - High-performance grip to polystyrene insulation board. (XPS and expanded polystyrene) - Immediate Hold and hardens in 2 hours Storage in aerosol cans. - Very cost effective. Depending on surface and roughness, can be dressed up to 12 square metres contained. - Minimum expansion during the drying time. - After curing done no need for extra Aushärtungen or Schrumpfungen more. - A lighter weight and less time compared with mortar (time profit approx. 30 - 40%). - Recommended for the installation of insulation board (XPS EPS). - Fire class: B2 For DIN 4102 Part - Manufactured at low temperatures up to 0 °C. Areas of Use: - is ideal for the installation of external thermal insulation boards and for filling cavities. - Suitable for the mounting and bonding on buildings such as wood, concrete, metal, tiles etc - to be used, if low Schaumexpansion creates - Installation and insulation of door/window frame Package Include: 12 x 800 ml Akfix 960 PU adhesive foam
Permanently flexible properties Non Pull - Exceptional Thixotrope. It is non-sticky/does not absorb dirt and dust. Does not change volume. Good storage stability. Easy to apply, easy to pull and smooth Can be painted Application of construction and repair of bodywork for cars, containers, caravans etc. Sealing and bonding of ventilation ducts, gutters etc. Sealing of sheet metal joints. Reduces vibration in all metal work and assembly. Seals against water, air, gas and dust Sealing of joints to the floor
Akfix P635 is a polyurethane sealant monocomponent to medium modulus, which polymers in contact with air moisture. It has excellent adhesion on all common construction materials such as concrete, brick, ceramic, glass, wood, galvanised and painted sheet metal and various plastic materials.
Quick curing properties Short pressure time Clear EXTREME ADHESIVE CAPACITY on numerous substrates Thixotropic, non-coloured, ideal for vertical joints Low consumption, economical Excellent filling capacity Conforms to D4 DIN EN 204. Designed for easy usage Allows repositioning Excellent resistance to humidity and weather. Does not shrink. Low odour Can also be used on damp surfaces. Applicable to construction and repair where strong and permanent bonding is required. Among porose-porous and porose-non-porous surfaces. Can be used on various types of materials such as Wood, MDF, chipboard, concrete, metal, polystyrene and polyurethane foam base, marble, granite, ceramic, etc.
Suitable Adhesive for shoe, shoe soles, sholes heels, tears in shoes and others as shoe materials. Especially suitable for the applications where cure speed needs to be accelerated. An adhesive set which consists of high viscosity cyanoacrylate adhesive and activator. High bonding strength. It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.
High quality effect aerosol, colour gold gloss in gift tin, each 400 ml.Price shown is for 1 tin.Colour acrylic based with rich in coverage to add "spark to an fantastical flights, high-gloss effect in an attractive appearance.Quick drying, Ergibig, ready to use.Suitable for both outdoor and indoor use.Recommendations:Colour spray, we recommend for customising your of/decorative moulding made from polyurethane and all other smooth surfaces such as metal, wood, concrete Lackierfähige and plastics.'Suitable for stucco made of styrofoam.Instructions for use: the bearbeitende surface need to be cleaned prior to use, the surface must be free from dust, grease and dirt. Not too Lackierende surfaces masking. Environment protect against spray. Tin before use Shake and sample spray 1 to 2 minutes. The in thin layers of a spray.The colour is fresh off the production. Durability To September 2025.Images with grey background and show of the original representation of the item.Other colours available in our shop.