The Aladdin EasyFit Isolator enables an isolation valve to be inserted quickly and safely in a pipe that can have cold or hot water flowing through it under high pressure. It provides an effective and robust product for all plumbers, maintenance engineers, water companies, housing associations and the DIY market.Use the EasyFit Isolator as an emergency shut-off for a leaking pipe or when the mains stopcock is seized or inaccessible. Also when you need to isolate a mains water feed to a multi-occupancy building or to maintain a component in a heating system.The EasyFit Isolator saves time cooling, draining down, refilling and returning to de-aerate. The bigger the system, the bigger the saving. No more freezing kits and the risk that an ice plug will fail.The EasyFit Isolator is an essential product for all plumbers.The isolator valve clamps around and installs into 15mm copper or plastic live pressurised pipe (hot or cold) in less than 3 minutes, providing a large bore, permanent stopcock in the system. 'WRAS Approved Stopcock'.
These highly engineered, British designed automatic air vents help to maintain the efficiency of your heating system by automatically bleeding air from your radiators, saving you energy and money. They also present a neater and more aesthetic finish than standard manual air vents. Designed to fit all radiators (vertical or horizontal), keeps radiators 'hot to the top!' The valves dispense with NO need for radiator keys. A one-way valve makes them suitable for use with radiators which can cycle into negative pressure, typically loft conversion radiators or on the suction side of the pump. The innovative Hydroseal technology utilises a 'dual-seal positive valve closure' which provides an extended, leak-free life. The valves are fully automatic, requiring no manual adjustment. Installing the valves is a simple job that does not require the system to be drained. Make bleeding radiators a thing of the past. With Aladdin automatic radiator valves: save energy, by up to 60%, reduce fuel bills, automatically remove air from radiators, reduce radiator system noise and reduce corrosion in your pipes. Aladdin valves automatically de-aerate the system - once fitted to the radiators they keep the central heating system completely topped up with water and operating at full efficiency. Thus radiators are always hot! The HV30 pictured will fit all 1/2" bsp panel radiators and towel radiators which. All products come with a 3yrs manufacturers guarantee. The valves are fully automatic, requiring no manual adjustment, and will not leak in the unlikely event of failure. A backup failure safety mechanism is incorporated. PLEASE NOTE THIS IS THE HV30 WITH NONE CARTRIDGE REMOVAL CLIP.
Aladdin Autovents automatically bleed air and improve efficiency of radiators, heating systems and underfloor heating networks. No need to manually bleed radiators Keeps radiators and heating systems fully heat generating and efficient Drains air from underfloor heating networks Reduces heating costs Avoids tenants calling out service engineers just to vent radiators Aladdin Autovents are loved by homeowners and landlords.
The Micro auto vent fits 1/8\" & 1/4\" BSP threads. By keeping radiators hot-to-the-top you get the maximum output from the radiator which heats your room faster and saves energy. It also reduces corrosion, system noise and provides a maintenance free system. Technical Specification Thread Size: 1/8\" & 1/4\" BSP threads Operating Pressure Range 0-10 bar Operating Temp. Range up to 120 deg. Size 16 mm diameter, 14 mm from tapping Fitting 9/16" spanner flats Seal Compression or fitter-applied threadseal
Clamps to pipework and installs an isolation valve safely in 3-5 minutes with the use of a drill. Provides a permanent, full-bore stop valve in the system. Installs into pressurised pipework, even with hot running water. Product contents:Isolator and instructions. Reusable toolkit (1 x long socket, 1 x long socket cap driver bit and 1 x Pozi bit). View more information.
Notice: Undefined property: stdClass::$Manufacturer in /var/www/vhosts/wundr-shop.it/httpdocs/QualitTradeTools/brand/content.php on line 145
Information about Aladdin Autovent Micro Radiator Bleeder (1/8 and 1/4 BSP)
• Easy fit: no adjustments necessary no need to drain the system
• Long, leak-free life
• Replaceable cartridge
• Saves energy & reduces fuel bills by keeping radiators air-free and hot to the top!
• Dispenses with the need for radiator bleed keys
• Reduces corrosion and system noise
SPECIALLY DESIGNED TO FIT ROLL-TOP, DESIGNER & CAST IRON RADIATORS
The automatic air vent is a pressure safety device in the central heating unit. They work by using floatation to release built up air. As water flows through the heating/cooling system, a float within the automatic air vent opens or closes depending on the water level. If the system contains only water, the float will be pushed to the top and the vent will be closed until the water level drops. This part is present in 7 different boilers in the Grant range including the Grant EUROFLAME UTILITY , COMBI V3 , COMBI MKII , VORTEX ECO , MULTI PASS KITCHEN
Aladdin Autovents purge automatiquement l'air et améliore l'efficacité des radiateurs, des systèmes de chauffage et des réseaux de chauffage par le sol. Réduit les coûts de chauffage. Évite les locataires qui appellent les techniciens de service juste pour ventiler les radiateurs. Aladdin Autovents sont aimés par les propriétaires. Plus de 10 modèles d'Autovents sont disponibles pour s'adapter à différents types de radiateurs et de systèmes de chauffage. Ils comprennent également des Autovents design de haute qualité et des versions sur mesure pour des applications spécialisées. Ils offrent une alternative élégante et efficace à devoir expulser manuellement l'air des radiateurs. Aladdin Autovents améliore l'efficacité globale du système de chauffage. Un radiateur standard avec seulement 5 cm d'air peut être jusqu'à 75% inefficace.
The versatile Micro fits 6mm tappings. This is the choice for those without a standard radiator type. This valve is the 6mm version of the Aladdin Auto vent, please check your radiator bleed valve for sizing. The micro is small and sleek and comes in an attractive chrome finish.
Aladdin Autovents automatically bleed air and improve efficiency of radiators, heating systems and underfloor heating networks. Please check your radiator bleed valve for sizing. No need to manually bleed radiators Keeps radiators and heating systems fully heat generating and efficient Drains air from underfloor heating networks Reduces heating costs Avoids tenants calling out service engineers just to vent radiators Aladdin Autovents are loved by homeowners and landlords. More than 10 models of Autovents are available to suit different types of radiators and heating systems. They also include high quality designer Autovents and bespoke versions for specialist applications. They offer a stylish and efficient alternative to having to manually expel air from radiators. Aladdin Autovents improve overall heating system efficiency. A standard radiator with just 2" of air can be up to 75% inefficient.
It is used to automatically remove trapped air from a radiator, eliminating the need for this to be manually done. It has a shut off cap that can be used to stop auto venting if so required. Size: 1/2" BSP. Product has got 3 operating modes: 1. Middle knob fully screwed - automatic venting (it will shut off automaticaly when there is no more air in the radiator). 2. Middle knob partially screwed - vent open. 3. Middle knob unscrewed - vent closed
TacoNova Radiator Bleed Valve Tacovent Vent 1/2 self-sealing.
The tried and tested automatic Tacovent vents reliably remove unwanted air from the heating systems.
It thereby increases the efficiency and lowers the energy consumption and the running costs.
Whether horizontal or vertical, radiator- or ventilation system.
The Valve is used to manual air vent for radiators. Manual vent opening through screw driver or designated key which can be found on our other auction. Please make sure that you are picking the right size, this table will help you to make correct choice (BSP standard).
1/2 Inch Directional Radiator Air Vent Bleed Valve With Plug Model: This is a replacement Air Vent for a radiator that has an 1/2 inch threaded end. The Valve is used to manual air vent for radiators. Manual vent opening through screw driver or designated radiator key. Features: Size 1/2 Inch Max working temperature 120oc Max static pressure is 10 bar You are buying 1 radiator air vent and 1 blacking plug