Alt-intech®

Plate POM C nature (white), 1000 x 500 x 6 mm Sheet Acetal white alt-intech®
alt-intech POM Sheet
£42.90
alt-intech® POM-C (Acetal) Polyoxymethylene can be used in temperatures up to +100 °C. The high surface strength is only surpassed by a few materials. POM shows good sliding properties and high resistance to wear and tear because of the high strength and smooth surface. There is a very low risk of stress cracks. POM-C (Copolymere) exhibits a high thermal stability and a high resistance to chemicals (high resistance to hydrolysis). Properties: no microporosity high strength high rigidity (to -40 °C) high thermal stability low water absorption high dimension stability good electrical insulating properties very good sliding properties high resistance to solvents very high resistance to stress cracks not resistant to high-concentrated acids difficult to glue and paint Applications: Bearings, fittings, gear wheels, parts for pumps, screws, bobbins, parts for the textile industry, medium for coating lines.
Plate POM C nature (white), 1000 x 500 x 8 mm Sheet Acetal white alt-intech®
alt-intech POM Sheet
£36.40
alt-intech® POM-C (Acetal) Polyoxymethylene can be used in temperatures up to +100 °C. The high surface strength is only surpassed by a few materials. POM shows good sliding properties and high resistance to wear and tear because of the high strength and smooth surface. There is a very low risk of stress cracks. POM-C (Copolymere) exhibits a high thermal stability and a high resistance to chemicals (high resistance to hydrolysis). Properties: no microporosity high strength high rigidity (to -40 °C) high thermal stability low water absorption high dimension stability good electrical insulating properties very good sliding properties high resistance to solvents very high resistance to stress cracks not resistant to high-concentrated acids difficult to glue and paint Applications: Bearings, fittings, gear wheels, parts for pumps, screws, bobbins, parts for the textile industry, medium for coating lines.
Plate POM C black, 500 x 245 x 4 mm Sheet Acetal alt-intech®
alt-intech POM Sheet
£8.96
alt-intech® POM-C (Acetal) Polyoxymethylene can be used in temperatures up to +100 °C. The high surface strength is only surpassed by a few materials. POM shows good sliding properties and high resistance to wear and tear because of the high strength and smooth surface. There is a very low risk of stress cracks. POM-C (Copolymere) exhibits a high thermal stability and a high resistance to chemicals (high resistance to hydrolysis). Properties: no microporosity high strength high rigidity (to -40 °C) high thermal stability low water absorption high dimension stability good electrical insulating properties very good sliding properties high resistance to solvents very high resistance to stress cracks not resistant to high-concentrated acids difficult to glue and paint Applications: Bearings, fittings, gear wheels, parts for pumps, screws, bobbins, parts for the textile industry, medium for coating lines.
PTFE round bar white, Ø 10 mm - 45 mm, wished length Teflon alt-intech® (Ø 15 mm, 1000 mm)
alt-intech PTFE Rod
£13.90
PTFE (also known as Teflon) has the lowest co-efficient of friction of any solid material and is greatly effective operating at extreme temperatures. This rod also has a fantastic chemical resistance and excellent electrical insulation properties. However, PTFE rod can be difficult to bond, but it is non-melting and is also self-extinguishing. Our manufacturers make engineering plastics that are somewhat oversized in either diameter and/or thickness. This is provided to assist customers to produce very accurate items within the size shown and remove any minor surface imperfection. See help article for further information.
Plate POM C nature (white), 500 x 100 x 16 mm Sheet Acetal white alt-intech®
alt-intech POM Sheet
£9.10
alt-intech® POM-C (Acetal) Polyoxymethylene can be used in temperatures up to +100 °C. The high surface strength is only surpassed by a few materials. POM shows good sliding properties and high resistance to wear and tear because of the high strength and smooth surface. There is a very low risk of stress cracks. POM-C (Copolymere) exhibits a high thermal stability and a high resistance to chemicals (high resistance to hydrolysis). Properties: no microporosity high strength high rigidity (to -40 °C) high thermal stability low water absorption high dimension stability good electrical insulating properties very good sliding properties high resistance to solvents very high resistance to stress cracks not resistant to high-concentrated acids difficult to glue and paint Applications: Bearings, fittings, gear wheels, parts for pumps, screws, bobbins, parts for the textile industry, medium for coating lines.
Plate POM C nature (white), 500 x 245 x 2 mm Sheet Acetal white alt-intech®
alt-intech POM Sheet
£4.50
alt-intech® POM-C (Acetal) Polyoxymethylene can be used in temperatures up to +100 °C. The high surface strength is only surpassed by a few materials. POM shows good sliding properties and high resistance to wear and tear because of the high strength and smooth surface. There is a very low risk of stress cracks. POM-C (Copolymere) exhibits a high thermal stability and a high resistance to chemicals (high resistance to hydrolysis). Properties: no microporosity high strength high rigidity (to -40 °C) high thermal stability low water absorption high dimension stability good electrical insulating properties very good sliding properties high resistance to solvents very high resistance to stress cracks not resistant to high-concentrated acids difficult to glue and paint Applications: Bearings, fittings, gear wheels, parts for pumps, screws, bobbins, parts for the textile industry, medium for coating lines.
Plate POM C nature (white), 500 x 245 x 3 mm Sheet Acetal white alt-intech®
alt-intech POM Sheet
£5.80
alt-intech® POM-C (Acetal) Polyoxymethylene can be used in temperatures up to +100 °C. The high surface strength is only surpassed by a few materials. POM shows good sliding properties and high resistance to wear and tear because of the high strength and smooth surface. There is a very low risk of stress cracks. POM-C (Copolymere) exhibits a high thermal stability and a high resistance to chemicals (high resistance to hydrolysis). Properties: no microporosity high strength high rigidity (to -40 °C) high thermal stability low water absorption high dimension stability good electrical insulating properties very good sliding properties high resistance to solvents very high resistance to stress cracks not resistant to high-concentrated acids difficult to glue and paint Applications: Bearings, fittings, gear wheels, parts for pumps, screws, bobbins, parts for the textile industry, medium for coating lines.
Black Acrylic XT Perspex sheet, 500 x 500 x 3 mm Plate cut black alt-intech®
alt-intech PC/PMMA Platte
£9.00
Acrylic Perspex solid sheet 500 x 500 x 3 mm black, trade name Plexiglas Perspex Sheets. 20 years UV warranty.
Plate POM C black, 500 x 245 x 10 mm Sheet Acetal alt-intech®
alt-intech POM Sheet
£14.10
alt-intech® POM-C (Acetal) Polyoxymethylene can be used in temperatures up to +100 °C. The high surface strength is only surpassed by a few materials. POM shows good sliding properties and high resistance to wear and tear because of the high strength and smooth surface. There is a very low risk of stress cracks. POM-C (Copolymere) exhibits a high thermal stability and a high resistance to chemicals (high resistance to hydrolysis). Properties: no microporosity high strength high rigidity (to -40 °C) high thermal stability low water absorption high dimension stability good electrical insulating properties very good sliding properties high resistance to solvents very high resistance to stress cracks not resistant to high-concentrated acids difficult to glue and paint Applications: Bearings, fittings, gear wheels, parts for pumps, screws, bobbins, parts for the textile industry, medium for coating lines.
Sheet acrylic Ø 100 mm cover round Plate colorless alt-intech®
alt-intech PC/PMMA Platte
£2.10
Round perspex plate made of Plexiglas®.
Bar POM C black, Ø 45 mm Long 500 mm Bar Round Acetal black alt-intech®
alt-intech POM Bar
£10.90
alt-intech® POM-C (Acetal) Polyoxymethylene can be used in temperatures up to +100 °C. The high surface strength is only surpassed by a few materials. POM shows good sliding properties and high resistance to wear and tear because of the high strength and smooth surface. There is a very low risk of stress cracks. POM-C (Copolymere) exhibits a high thermal stability and a high resistance to chemicals (high resistance to hydrolysis). Properties: no microporosity high strength high rigidity (to -40 °C) high thermal stability low water absorption high dimension stability good electrical insulating properties very good sliding properties high resistance to solvents very high resistance to stress cracks not resistant to high-concentrated acids difficult to glue and paint Applications: Bearings, fittings, gear wheels, parts for pumps, screws, bobbins, parts for the textile industry, medium for coating lines.
Bar PET White - Natural, Ø 70 mm Long 1000 mm Bar Round alt-intech®
alt-intech PET Bar
£63.83
Polyethylene terephthalate shows high tensile and mechanical strength, hardness and toughness, low friction and a high dimensional stability. PET may be used at temperatures ranging from -20 °C to approx. +100 °C. Properties: high mechanical resistance and tensile strength high surface strength easy to varnish and polish high dimensional stability high toughness good electrical insulating properties high chemical resistance limited dielectric properties sensitive to hydrolysis Applications: Bearings, pumps and parts for housings, frame components, tank lids, cogwheels, insulators for the electrical engineering, deflection rollers for the filament industry, levers, handles, control discs.
Plate POM C black, 500 x 500 x 5 mm Sheet Acetal alt-intech®
alt-intech POM Sheet
£18.90
alt-intech® POM-C (Acetal) Polyoxymethylene can be used in temperatures up to +100 °C. The high surface strength is only surpassed by a few materials. POM shows good sliding properties and high resistance to wear and tear because of the high strength and smooth surface. There is a very low risk of stress cracks. POM-C (Copolymere) exhibits a high thermal stability and a high resistance to chemicals (high resistance to hydrolysis). Properties: no microporosity high strength high rigidity (to -40 °C) high thermal stability low water absorption high dimension stability good electrical insulating properties very good sliding properties high resistance to solvents very high resistance to stress cracks not resistant to high-concentrated acids difficult to glue and paint Applications: Bearings, fittings, gear wheels, parts for pumps, screws, bobbins, parts for the textile industry, medium for coating lines.
Plate POM C black, 1000 x 1000 x 6 mm Sheet Acetal alt-intech®
alt-intech POM Sheet
£88.80
alt-intech® POM-C (Acetal) Polyoxymethylene can be used in temperatures up to +100 °C. The high surface strength is only surpassed by a few materials. POM shows good sliding properties and high resistance to wear and tear because of the high strength and smooth surface. There is a very low risk of stress cracks. POM-C (Copolymere) exhibits a high thermal stability and a high resistance to chemicals (high resistance to hydrolysis). Properties: no microporosity high strength high rigidity (to -40 °C) high thermal stability low water absorption high dimension stability good electrical insulating properties very good sliding properties high resistance to solvents very high resistance to stress cracks not resistant to high-concentrated acids difficult to glue and paint Applications: Bearings, fittings, gear wheels, parts for pumps, screws, bobbins, parts for the textile industry, medium for coating lines.
Plate POM C black, 500 x 245 x 2 mm Sheet Acetal alt-intech®
alt-intech POM Sheet
£4.50
alt-intech® POM-C (Acetal) Polyoxymethylene can be used in temperatures up to +100 °C. The high surface strength is only surpassed by a few materials. POM shows good sliding properties and high resistance to wear and tear because of the high strength and smooth surface. There is a very low risk of stress cracks. POM-C (Copolymere) exhibits a high thermal stability and a high resistance to chemicals (high resistance to hydrolysis). Properties: no microporosity high strength high rigidity (to -40 °C) high thermal stability low water absorption high dimension stability good electrical insulating properties very good sliding properties high resistance to solvents very high resistance to stress cracks not resistant to high-concentrated acids difficult to glue and paint Applications: Bearings, fittings, gear wheels, parts for pumps, screws, bobbins, parts for the textile industry, medium for coating lines.
Bar PET White - Natural, Ø 40 mm Long 1000 mm Bar Round alt-intech®
alt-intech PET Bar
£24.28
Polyethylene terephthalate shows high tensile and mechanical strength, hardness and toughness, low friction and a high dimensional stability. PET may be used at temperatures ranging from -20 °C to approx. +100 °C. Properties: high mechanical resistance and tensile strength high surface strength easy to varnish and polish high dimensional stability high toughness good electrical insulating properties high chemical resistance limited dielectric properties sensitive to hydrolysis Applications: Bearings, pumps and parts for housings, frame components, tank lids, cogwheels, insulators for the electrical engineering, deflection rollers for the filament industry, levers, handles, control discs.
Plate POM C black, 500 x 245 x 3 mm Sheet Acetal alt-intech®
alt-intech POM Sheet
£6.50
alt-intech® POM-C (Acetal) Polyoxymethylene can be used in temperatures up to +100 °C. The high surface strength is only surpassed by a few materials. POM shows good sliding properties and high resistance to wear and tear because of the high strength and smooth surface. There is a very low risk of stress cracks. POM-C (Copolymere) exhibits a high thermal stability and a high resistance to chemicals (high resistance to hydrolysis). Properties: no microporosity high strength high rigidity (to -40 °C) high thermal stability low water absorption high dimension stability good electrical insulating properties very good sliding properties high resistance to solvents very high resistance to stress cracks not resistant to high-concentrated acids difficult to glue and paint Applications: Bearings, fittings, gear wheels, parts for pumps, screws, bobbins, parts for the textile industry, medium for coating lines.
Tube Perspex 30/24 mm Acrylic Clear Hollow Tube Long 1000 mm colorless
Gehr
£6.60
GEHR PMMA® (acrylique) Polymethylmethacrylate is brittle and shows a good mechanical strength, tensile strength and hardness. PMMA is also scratch-resistant and easy to polish. It shows a good temperature resistance and UV-stability. The operating temperature of PMMA ranges from -40 °C to approx. +70 °C. Properties: •very high mechanical strength and hardness •high mechanical rigidity •excellent transparency •easy to polish •good thermal stability •good insulation properties •low water absorption •excellent weather resistance •possible stress problems •low chemical resistance •brittle Applications: Display, advertisement, food industry, tubes for lamps, hand rails.
Tube Perspex 10/7 mm Acrylic Clear Hollow Tube Long 1000 mm colorless
Gehr
£3.55
GEHR PMMA® (acrylique) Polymethylmethacrylate is brittle and shows a good mechanical strength, tensile strength and hardness. PMMA is also scratch-resistant and easy to polish. It shows a good temperature resistance and UV-stability. The operating temperature of PMMA ranges from -40 °C to approx. +70 °C. Properties: •very high mechanical strength and hardness •high mechanical rigidity •excellent transparency •easy to polish •good thermal stability •good insulation properties •low water absorption •excellent weather resistance •possible stress problems •low chemical resistance •brittle Applications: Display, advertisement, food industry, tubes for lamps, hand rails.