The Altecnic range of safety relief valve is designed for use in conjunction with heating systems. It is designed to protect the system against any damage from abnormal pressure increases. Size: 15mm Set Pressure: 6 Bar
The Altecnic pressure gauge is suitable for use in domestic and commercial heating systems. This gauge has been specially selected to cover the pressure range encountered in heating systems which fall within 10 bar. This Altecnic pressure gauge is designed to BS EN 837-1.
This is an inlet control valve for use on an unvented hot water cylinder system. It incorporates pressure reducing valve, pressure relief valves, check valve and filter in a two piece design. Features: Multibloc control valve for unvented hot water cylinders Contains pressure reducing valve and relief valve Pressure reducing setting: 3.0 bar Pressure relief setting: 6.0 bar 22mm copper x copper connection Specification: Maximum inlet pressure: 12 bar Maximum working pressure: 65°C Pressure reducing setting: 3.0 bar Pressure relief setting: 6.0 bar 22mm copper x copper connection
Altecnic Modern Corner Polished Radiator Valves Chrome (Pair) These Manual radiator valves are in a Modern style with a Poished chrome finish compatible with any standard radiator or towel rail. Max Working Pressure: 10 bar Hot Water Inlet Temperature: 85°C Size: 15mm x 1/2" Altecnic Part number: YU-JQAL029LC
Specification: * Capacity: 8 Litres * Comes with wrap around bracket * Max. operating pressure: 3 Bar * System temperature: -10/+99°C * Membrane temperature: -10/+70°C * Factory pre-charge: 1.5 Bar * Connection: 3/4" G * Height: 338 mm * Diameter: 217 mm Robokit contains: * Expansion Pressure Relief Valve * Expansion Pressure Relief Valve manifold * Filling Loop * Gauge * Expansion Vessel Bracket We will more than likely have the spare you require in stock, in the odd instance we do not have stock we should be able to get spares within a few days to you. This is a brand new item and comes complete with the manufacturers standard warranty
Altecnic's Ecocal and Eclipse Radiator Drain Off Tail Piece has been designed to be suitable for use in domestic or commercial environments. The chrome plated finish means this tail piece blends smartly in to any room.
3 Bar 1/2" MBSP x 15mm Safety Pressure Relief Valve with Gauge Port
* Designed to be used in domestic hot water and heating systems
* Protects hot water cylinders and heating components
* Set pressure: 3 bar
* 1/2" male threaded to 15mm connections
* Suitable for water (potable or not) and air
* Stainless steel spring
* Includes gauge port
* WRAS Approved product
* Granted CE Mark
Safety relief valves are used in domestic hot water systems to protect the hot water cylinder and in heating systems to protect boiler and other components. The valve is selected for the required set pressure. As the pressure rises, when the discharge pressure is reached the valve opens and discharges to atmosphere, preventing the pressure within the system reaching levels which would be dangerous for the boiler, hot water storage cylinder and any personnel in the adjacent vicinity.
* Medium: water and air
* Temperature range: 5 to 110°C
* Set pressure: 3 bar
* Max. static pressure: 10 bar
* PED category: IV
Pulsed Output Single Jet Turbine Water Meters Brass bodyConforms to ISO 4064 and EC75/33 Class A/BEquipped with impulse emitting device for remote readingDry dial counterSuitable for installation in any orientationSupplied with 200cm cable, nuts, tails and washersConnections in BSPPMOutput per pulse 1 litre per 1 pulsePower rating current 0.2APower rating Voltage 30 VTemperature rating water (maximum) 90CMaximum operating pressure 16 barMaximum reading 100m3Minimum reading 0.000m3Instruction leaflet included Dimensions Height without lid (mm) Length without tails (mm) Overall length (With tails) (mm) Overall diameter (mm) Stock No. 66 110 190 72 399-5018 70 130 228 72 399-5030 130 160 260 100 399-5046 Note The impulse emitting device is in the form of a single normally open reed switch which closes momentarily once per litre of water flow. Connections are via a two core cable coloured brown and white connected internally to the water reed switch