Ideal for use on carpets, door panels, plastic and vinyl trim The foam breaks down and penetrates the contamination for easy removal of even ingrained grime and stains Effective for removing chocolate, oil, ink and ingrained stains
AMBERSIL POOL AND SNOOKER TABLE CLOTH CLEANER. SUITABLE FOR MOST GRADES OF POOL AND BILLIARD CLOTHS. CLEANS AND MAINTAINS SNOOKER TABLE CLOTH. 400ml AEROSOL CAN. PLEASE NOTE THAT DUE TO ROYAL MAIL'S REFUSAL TO POST AEROSOLS, WE CAN ONLY SELL THIS ITEM TO UK MAINLAND ONLY. ANY PURCHASES FROM NORTHERN IRELAND, ISLE OF MAN AND ANY OFF SHORE ISLAND WILL BE REFUNDED.
AMBERKLENE FE10 is a fast evaporating solvent blend which contains no CFCs or other chlorinated solvents. It is an ideal alternative to 1 - 1 - 1 Trichloroethane. APPLICATIONS A highly effective degreasing agent for all hydrocarbon soiling - including: Oil Grease Tar and Bitumen For use in numerous industries including: where a fast and effective cleaning solvent is required Office Equipment PCBs and Electronics Textiles Moulding Automotive Offshore Printing Agriculture Aviation Marine Electric Motors Light and Heavy Engineering Efficiently cleans plastics - ferrous and non-ferrous metals; evaporating quickly to leave a clean - dry surface. Also recommended for spot removal in the textiles and associated industries. N.B. May affect certain plastics.Always test a small - inconspicuous area before general use. Ensure electrical equipment is switched off before cleaning. TECHNICAL DATA Appearance : Clear - colourless liquid Odour : Mild and sweet Specifications/Approvals : NATO Catalogue No. 6850-99-6636478 SG @ 25C : 0.770 Pressure @ 25C : 5 - 6 Bar Discharge rate : 2.5 g/sec Kb value : 75 Initial boiling point : 64C Freezing point : Below -50C Evaporation rate : 6.0 (with respect to Butyl Acetate)Flammability : Classified as extremely flammable under Current EC Regulations Flashpoint -18C (Bulk) Packaging : 400 ml aerosol STORAGEThe product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame
AMBERSIL 40+ is the complete maintenance treatment for protection against: Corrosion Water displacement Lubrication and Light surface rust removal One simple application - by spray - swab or dip - stops the spread of existing corrosion - gives lasting protection against further attack and removes and repels ambient moisture. Ambersil 40+ is ideal for use on all mechanical and electrical equipment. As a penetrant - it will quickly free seized nuts - bolts and bearings whilst the highly effective water displacing properties make 40+ the perfect damp-start solution for ignition systems and other electrical equipment. The protective lubricating film is non-conductive and remains operational even at severe sub-zero temperatures. It will not affect paints or plastics and is lastingly effective on all metals; including aluminium. Freshly machined surfaces resist finger-printing and will stay clean and bright -even in highly corrosive conditions. Fitted with a 360 degree Spray System for all angle use - even upside down. TECHNICAL DATA Appearance : Amber coloured liquid Odour : White Spirit Specifications/Approvals : Rolls Royce Item 1036J - Approved Supplier 176 Ford Tox No. 114469 SG @ 25C : 0.79 Pressure @ 25C : 5 Bar (aerosol) Discharge rate : 1.2g/sec (aerosol) Initial boiling point 147C Temperature range : Operational from 20C to +115C Moisture content : Less than 700 ppm Corrosion protection : 200 hours in BS 3900 F4 Salt Spray Test Solubility : Soluble in solvents - insoluble in water Film Thickness : 1.65 x 10-4 cm Film Weight : 1.46 g/sq. metreCompatibility : Rubber No visible affect when sprayed. Most rubbers will swell after prolonged immersion Paintwork No affect on surface. Wax polishes and coatings may be softened after prolonged exposure Plastics No visible affects after 240 hours immersion of: Formica Acrylic sheet Polyester glass fibre laminate Epoxy glass fibre laminate Vinyl sheet and Ebonite Over-painting Although not always necessary -
Ambersil 500ml Spray, Treadmill Silicone Oil Lubricant Wax Aerosol Spray. Odourless, Colourless & Non Toxic, Eliminates Friction & Fabric Drag. Most treadmills require frequent lubrication of the running belt / deck. dependant on on make they require one of three lubricant types
Amberclens Anti-static Foaming Cleaner A multipurpose, anti-static foaming cleaner. Ideal for general cleaning on a wide variety of electronic, industrial, aerospace and commercial equipment.Removes tough, stubborn stains such as grease, grime, dirt and nicotineSafe for use on plastics, metals, painted and glazed surfacesAnti-static formulation, reduces the attraction of airborne dustFoaming action limits over applicationMeets Military, Rail and automotive specifications - NATO catalogue No. 6550-99-2125987, British Rail catalogue No. 7/7056, Ford Motor Company Tox No. 148491Fitted with 360º spray system for all angle useQuick and easy to use. Spray on, wipe off
Fast drying Safety Data Sheet (152.33KB) EN Durable tip with valve action to prevent excess paint flow Medium thickness point - Ø 4.5mm Easy, accurate application Ideal for use on metal, rubber, glass, textile, paper, enamel, plastic, cardboard, tiles and wood Coating Applications: Building Construction, Mechanical Coating Colour: Yellow Coating Type: Paint Dispensing Method: Pen Applicator SVHC: No SVHC (17-Dec-2014) Volume: - Weight: .0215kg Colour: Yellow
Ambersil is the first in the brilliant and exciting fantasy adventure trilogy by A.C.Wilson. In the tradition of UK fantasy, Ambersil tells of a parallel world where all is strange and wonderful with odd creatures, swords and sorcery, magic and mystery reign supreme. Powerful sword wielding Guardians fight for justice in an unforgiving realm using their amazing gifts and their powerful magical Magi allies. New arrivals must tread carefully as they stumble from adventure to adventure unaware that their very presence within this world, Voreal, has set the wheels of war in motion. Ambersil is a pioneering venture with Dragons, Imps, Wraiths and Wolves through danger and peril. Will Thomas and his friends survive to meet the mysterious Guardians? Will they find a way back home or accept their fate?
STAINLESS STEEL CLEANER FG is a water based - foaming cleaner for degreasing and cleaning of stainless steel surfaces. The product combines tough cleaning power with the application of a durable protective coating all in one application.FEATURES Registered NSF C1 (N 138212) for use in the food industryEliminates: Fingerprints Watermarks Dust and dirt from stainless steel Leaves a protective non-greasy barrier for a long term shineProvides metal surfaces with a long term protective coating which inhibits staining and contamination Suitable for: Stainless steel Aluminium Chrome and most plastics (test prior to use) Non-corrosive Fitted with a 360O Spray System for all angle use - even upside-down Does not contain nut oils or nut oil derivatives APPLICATIONS Cleaning of all kind of metal surfaces throughout industry Protection of metal surfaces against staining and contamination DIRECTIONS Shake well and apply sparingly from a distance of 20 cm onto the surface to be cleaned On heavily contaminated surfaces - allow the product to penetrate the soil for 10 to 30 seconds Wipe with a lint free cloth or paper towel If parts or equipment are intended to return to a food processing area rinsing with potable water is required TECHNICAL DATA NSF Number : C1 (N 138212) Appearance : white opaque Odour : neutral Flash Point : >70C Specific Gravity : 0.93 Solubility : Soluble in water Packaging : 500ml aerosolSTORAGE The product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame
A low viscosity, solvent-drying, acrylic based conformal coating with excellent insulating properties. The lacquer is transparent and flexible. It has a durable adhesion in the temperature range from -40°C to +60°C and can be used for a short period of tim... Protects printed circuit boards and surfaces from humid inorganic acid or caustic vapours. Insulates and seals out moisture and dust. Prevents electrical leakages and short circuits. Can also be used as extra/after insulation of coils and transformers. Can be diluted with thinners.