Ambience Hardwood Flooring

Solid Oak R Section 15mm Ramp Threshold Door Strip Trim 900mm Pre Finished
Ambience Hardwood Flooring
£14.99
Solid Oak R Section is used to join two floors that are at a different level Size: 21mm x 57mm x 0.9m Species: White Oak Finish: Pre-Finished Installation: Glue Down. Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak 15mm T Section Door Bar Threshold Moulding Un Finished 900mm Trim
Ambience Hardwood Flooring
£14.99
Size: 19mm x 58mm x 0.9m Species: White Oak Finish: Un-Finished (Oil or Lacquer to finish the moulding) Installation: Glue Solid Oak T used to join two floors that are at the same level Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak 15mm L section End Cap Wood Floor Moulding 900mm Trim Pre Finished
Ambience Hardwood Flooring
£14.99
Size: 20mm x 40mm x 0.9m, Species: White Oak Finish: Pre-Finished Installation: Glue Solid Oak L Section is used to go against patio door, upvc doors and to edge coir matting. Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak Stair Profile Nosing Lip Over 15mm 900mm Long Pre Finished
Kitchener Flooring Ltd.
£12.90
Size: See dimensional drawing Species: White Oak Finish: Pre-finished Installation: Glued Solid Oak Stair Nosing used to join mulitple steps on a staircase. Product must be glued to existing staircase using one of our flexible adhesives (Bona or Sika) Existing staircase bullnoses must be routered or boxed out to create 90 degree angle needed to fit Oak Stair Nosing/s. Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak 15mm Ramp Threshold Bar 900mm Long
Berkshire Trade Flooring Supplies
£19.99
High quality, solid oak ramp bar. For joining wood to any other floor covering where a smooth height change is required. The rebate thickness is 15mm. The top width is 61.5mm. The bottom width is 42mm. This bar is 900mm long and will do one normal door way, also available in 2700mm lengths. The bars are sent by courier and normally arrive next day.
Solid Oak Lacquered Height Adjustable Ramp Flooring Profile, Threshold/Cover Strip, Door Bar, Suitable for 15-18mm Floors
Weatherbar Sills
£13.99
The height adjustable flooring profile range from Weatherbar is a simple yet highly effective way of providing a neat and aesthetically pleasing finish to your floor. Whether you have floors of the same height or differing, there is a profile to suit. A lip at the rear of the profile allows for the floor to move underneath as it expands and contracts naturally. The profiles come with a unique uPVC base system which is fixed to floor. This then allows the top section to be tapped in from above with a rubber mallet.
Solid Oak Pre Finished Wood to Carpet Moulding Threshold Trim 900mm
Ambience Hardwood Flooring
£14.99
Size: 0.9m, Species: Oak Finish: Pre-finished Construction: Solid oak Installation: Glue down Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak 18mm T Section Door Bar Threshold Moulding Pre Finished or Un Finished 900mm Trim (Un Finished (can be Stained a differetn Colour) Oak)
Kitchener Flooring Ltd.
£17.99
Solid Oak 18mm T bar threshold moulding to finish a same leveled floor. Pre finished (Lacquered) or Unfinished Solid Oak 900mm long. Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak R Section Ramp Threshold Door Strip Trim 900mm Un Finished
Ambience Hardwood Flooring
£14.99
Size: 21mm x 57mm x 0.9m Species: White Oak Finish: Un-Finished (Oil or Lacquer to finish the moulding) Installation: Glue Down. Solid Oak R Section is used to join two floors that are at a different level Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak 18mm L Section End Cap Wood Floor Moulding 900mm Trim Pre Finished
Ambience Hardwood Flooring
£17.99
Size: 20mm x 40mm x 0.9m, Species: White Oak Finish: Pre-Finished Installation: Glue Solid Oak L Section is used to go against patio door, upvc doors and to edge coir matting. Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak Stair Profile Nosing Lip Over 15mm 900mm Long Un Finished.
Kitchener Flooring Ltd.
£12.89
Size: See dimensional drawing Species: White Oak Finish: Un-finished Installation: Glued Solid Oak Stair Nosing used to join mulitple steps on a staircase. Product must be glued to existing staircase using one of our flexible adhesives (Bona or Sika) Existing staircase bullnoses must be routered or boxed out to create 90 degree angle needed to fit Oak Stair Nosing/s. Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak Stair Nosing Profile Flush Fit 18mm Un Finished 900mm Long
Kitchener Flooring Ltd.
£20.99
Size: See dimensional drawing Length: 0.9m Species: White Oak Finish: Un-finished oak Installation: Glue Down. Solid Oak Flush Fit Stair nosings are used on the front edge of a step when cladding a staircase Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak 18mm 'R Section' Ramp Door Bar Threshold 0.9m Pre-Finished & Unfinishe Available (Unfinaished (can be Stained a Different Colour) Oak)
Kitchener Flooring Ltd.
£17.99
Solid oak R Section Ramp threshold from floor to a lower level. Pre finished or Un Finished solid oak available. 0.9m Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak 18mm 'L Section' Door Bar Threshold Door Strip Pre-Finished or Un-Finished (Pre Finished (Lacquered) Oak)
Kitchener Flooring Ltd.
£17.99
Solid Oak L Section in either Pre finished (lacquered Oak or Un Finished Oak (can be stained different colours). 0.9m Square edge threshold. Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak Un Finished Wood to Carpet Moulding Threshold Trim 900mm
Ambience Hardwood Flooring
£14.99
Size: 0.9m, Species: Oak Finish: Un-finished (Oil or Lacquer to finish the moulding) Construction: Solid oak Installation: Glue down Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak 18mm L Section End Cap Wood Floor Moulding 900mm Trim Pre Finished
Ambience Hardwood Flooring
£17.99
Size: 20mm x 40mm x 0.9m, Species: White Oak Finish: Pre-Finished Installation: Glue Solid Oak L Section is used to go against patio door, upvc doors and to edge coir matting. Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak Stair Nosing Profile Flush Fit 18mm Pre Fisnished 900mm Long
Kitchener Flooring Ltd.
£20.99
Size: See dimensional drawing Length: 0.9m Species: White Oak Finish:Pre-Finished Installation: Glue Down. Solid Oak Flush Fit Stair nosings are used on the front edge of a step when cladding a staircase Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak Stair Nosing Flush Fit 15mm Pre Fisnished 900mm Long
Kitchener Flooring Ltd.
£19.99
Size: See dimensional drawing Length: 0.9m Species: White Oak Finish: Pre-Finished Installation: Glue Down. Solid Oak Flush Fit Stair nosings are used on the front edge of a step when cladding a staircase Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak Stair Nosing Profile Flush Fit 21mm Un Finished 900mm Long
Kitchener Flooring Ltd.
£20.19
Size: See dimensional drawing Length: 0.9m Species: White Oak Finish: Un-finished oak Installation: Glue Down. Solid Oak Flush Fit Stair nosings are used on the front edge of a step when cladding a staircase Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.
Solid Oak Stair Nosing Profile Flush Fit 21mm Pre Fisnished 900mm Long
Kitchener Flooring Ltd.
£22.99
Size: See dimensional drawing Length: 0.9m Species: White Oak Finish:Pre-Finished Installation: Glue Down. Solid Oak Flush Fit Stair nosings are used on the front edge of a step when cladding a staircase Please note this item is made from solid oak so naturally you will see colour variation within the wood and the occasional knot. This is part of the natural beauty of oak.