This is an assortment of 180 quality rubber grommets in 8 popular sizes. These grommets are ideal for automotive, marine and RV wiring jobs. The grommets are designed to protect wire and cables in metal junction areas. These grommets are essential for all applications that require wire or metal separation. The set includes: 40-Piece each of 1/4-Inch, 5/16-Inch and 3/8-Inch, 25-Piece of 7/16-Inch, 20-Piece of 1/2-Inch, 5-Piece each of 5/8-Inch, 7/8-Inch and 1-Inch
Eye bolt and hook bolt screw set for professionals and handy homeowners;Drop-forged steel with zinc coating for corrosion resistance;Plastic storage case ideal for workshop;Set contains six common eye bolt and hook bolt screws;60-Piece 1 1/8-Inch, 12-Piece 1 13/16-Inch, 12-Piece 1 15/16-Inch eye bolt screws
Superior long reach design for tough access areas;Machined jaws for maximum gripping strength;Drop-forged, heat treated, high carbon steel;Meets or exceeds ANSI specifications;Cushioned, non-slip handle grips
These Ansen Tools drywall anchors are made from high grade Nylon . They are Self-Drilling with No hole preparation required. The deep thread design on the anchors provides extra strong engagement in 3/8", 1/2", or 5/8" drywall. These anchors hold up to 50lbs and can be easily removed.
The kit contains 30-Piece 1/4-Inch, 25-Piece 5/16-Inch, 20-Piece 3/8-Inch, 15-Piece 7/16-Inch and 10-Piece 1/2-Inch;Soft copper compresses for a tight fit;All washers set in easy to use SAE sizes;Washers come in convenient storage case;Quality guarantee
ApplicationsThe anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick.EnvironmentThe anchor is designed for use in a Dry environment.Head Style The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached.Hole Diameter/Bit DiameterThe anchor requires a 5/32" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.Driver RequiredA 1/4" is required for driving the anchor into the base material.Diameter of Anchor The diameter of the anchor is 3/16".Length Anchor The length of the anchor is 2-1/4"Thread LengthThe length of the threads on the anchor is 1-3/4" in length.Minimum EmbedmentThe minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 3/4" to 1-1/4". This will ensure that the minimum embedment of 1" will be met.Fixture Hole DiameterThe hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/16" diameter anchor requires the hole in the fixture to be 1/4".Spacing between AnchorsEach anchor must be spaced a minimum distance of 3" from each other when measured center to center.Edge DistanceIt is very important not to install the anchor any closer than 2-1/4" from an unsupported edge of the concrete.
Note:¡ñ Please be noted that self-adhesive product only work on non-porous surfaces without dust or water. Such as glass, polished tiles or even stainless steel surface. Paint wall and wooden wall don't suit for this product. The glue was not strong enough for the steam.¡ñ Before you install the hook, please clean the wall and keep surface dry, paste in the desired position, recommendation after 24 hours, hanging objects will be better.¡ñ This adhesive hooks is made with Strong sticky self adhesive, very strong, so you apply it to the wall or other places, it is not easy to remove. If you want to apply to the wall, especially the gypsum surface, please choose the position to stick with care before use.Package Included:8 * Single Self Adhesive Hooks