Antelco

Antelco 31495 360 Degree Shrubbler Spike - Black (Pack of 25)

Notice: Undefined property: stdClass::$Manufacturer in /var/www/vhosts/wundr-shop.it/httpdocs/QualitTradeTools/brand/content.php on line 145

£10.95
Pack of 25 360 degree shrubblers on spikes
Antelco DB Tee Reducer 13MM to 4MM Pack of 25
Antelco
£14.42
By Buttacup, Antelco DB Reducing Tee (Barbed). 3 Way Connector, 13mm to 4mm (47765 Pack of 25)
Antelco Key Hole Punch
Antelco
£0.83
Irrigation Hole Punch , Used to punch holes in 13 mm main-tube. Also enables tightening and adjustment of micro-sprinklers. High quality hole punch tool. Made from UV stable plastic. Sharp point for punching holes in 13mm hose. Also features small hex spanner tool for fitting fittings into 4mm hose. Product Details: Supplied in a pack of 1 Easy to Use Bright Colour to make it easy to find
ANTELCO DB DOUBLE BARBED END PLUG 13MM PACK OF 5
ANTELCO
£3.15
ANTELCO DB DOUBLE BARBED END PLUG 13MM
Antelco Threaded/Barbed Micro Tube Adapters 10 Pack
Antelco
£2.76
Threaded/Barbed Micro Tube Adapters 10 Pack , The Barbed/Threaded tube adapters used to connect the micro-hose to the main water supply. These are used for sprinklers,drippers,sprays and jets and are a must. Please don\'t forget these,you will need these. Just punch a hole into the main supply pipe,insert the tube adapter and then connect the micro hose to the tube adapter. These are the same style as supplied in the Hozelock watering kits,we also offer a double barbed tube adapter,this gives a tighter fit in our opinion. Product Details: Supplied in a pack of 10 Barbed one end and threaded the other Can be inserted within the end of a rigid riser. Easy to insert into the main supply hose - 13mm Compatible with Hozelock systems
Antelco 2 in 1 Punch & Cutter, Irrigation Tube
Antelco
£14.50
A combination tool that prepares poly tube for the installation of emitters and fittings in low pressure irrigation systems. Height 30mm , Width 55mm, length 145mm. Weight 65g
ANTELCO ASTA STAKE VARI-ROTOR SPRAY ASSEMBLY 1.5mm BLACK BASE
Antelco
£3.55
ASTA® STAKE VARI-ROTOR SPRAYTM ASSEMBLY 1.5mm BLACK BASE
Antelco Winged Micro Spray Jet - Half Circle, green base. Pack of 20

Notice: Undefined property: stdClass::$Manufacturer in /var/www/vhosts/wundr-shop.it/httpdocs/QualitTradeTools/brand/content.php on line 145

£4.96
Asta Ground/Hold Down Stake for Pipe up to 22mm diameter Antelco, Pack of 25

Notice: Undefined property: stdClass::$Manufacturer in /var/www/vhosts/wundr-shop.it/httpdocs/QualitTradeTools/brand/content.php on line 145

£9.99
Antelco 44835 13 mm Barbed Elbow - Black (Pack of 25)
Antelco
£8.79
Antelco 13mm Elbow Connector Premium quality product made by Antelco, Australia Fits 13mm ID (internal diameter) pipes including standard garden hose, PVC irrigation pipe, hozelock and soaker hose. UV stabilised plastic for long life Quality barbed acetal elbow piece fittings provide high retention in low pressure poly tubing for long-term reliability of connections. The elbow piece can be confidently installed without clamps when matched to quality low pressure poly tubing with corresponding dimensions. Operating pressures should not exceed 300 kPa.
ANTELCO SHRUBBLER 360 DEGREE MICRO GARDEN IRRIGATION ADJUSTABLE DRIPPER SPRINKLER ON STAKE PACK OF 15
ANTELCO
£6.68
Best seller-adjustable 0-40l/hr Cleanable end-line dripper on spike with free nipple fo use with 4/6mm micro pipe 
ANTELCO SHRUBBLER 360 DEGREE MICRO GARDEN IRRIGATION ADJUSTABLE DRIPPER SPRINKLER ON STAKE PACK OF 10
ANTELCO
£5.39
Best seller-adjustable 0-40l/hr Cleanable end-line dripper on spike with free nipple fo use with 4/6mm micro pipe 
Antelco Rigid Riser 20cm with threaded adapter - Pack of 10
Antelco
£3.95
A Rigid Riser is a rigid tube that will connect directly into stakes in order to elevate and adjust the height of emitters such as threaded micro sprays and mini sprinklers. This rigid riser will elevate the spray or sprinkler lifting the spray head above the planting. The riser simply clips directly into the side of the stake, and the emitter screws into the top of the riser. The bottom of the riser has a threaded adaptor for screwing into the end of your 4mm irrigation pipe.This assembly allows for more effective delivery of water to plants and keeps the emitter safely anchored to the place where it is needed.Available in a range of sizes from Antelco.
13mm End Stop Plug Connector for irrigation/Hydroponics Pipe/Tube Antelco, Pack of 5
Antelco
£2.96
Main supply hose end stop, used to stop water flow at end of main supply hose. Applications: Home gardens, greenhouses ,poly-tunnels, landscaping and professionally installed irrigation systems.
3 x Micro Garden Irrigation Inline Valve/tap for 13mm pipe purple black Watering
Antelco
£8.59
This is a pack of 3 irrigation valves. Operates from off to fully on in low pressure irrigation systems. These have 13mm barbed connectors for plugging into 13mm inside diameter supply tube. Secondary zone water diversion and flow control. Always install as an in-line valve with tubes connected to both inlet and outlet.
VARI-ROTOR SPRAYâ„ 1.5mm BLACK BASE PACK OF 5
Antelco
£4.49
Antelco Vari-Rotor Spray 1.5mm black base
Antelco Winged Micro Winged Mister/Jet, Micro Irrigation. Pack of 20, Free Postage
Antelco
£5.85
Antelco Microspray Mister This product is ideal for greenhouses or for installing above hanging baskets The product has a winged base with ?Quick? thread for rapid and easy installation. Can be used with Asta Stakes & Rigid Riser to elevate the spray pattern and increase coverage. To see this product in use : Grow Insane - Antelco Two Part Spray Jets - YouTube Video will open in a new window .ytvideo { margin:auto; max-width:480px; font-family:arial; text-align:center; position:relative; min-height:120px; overflow:hidden; background-color:#555; } .ytvideo p { position:absolute; margin:0; color:white; background-color:rgba(0,0,0,.5); } .ytvideo .yt_hd { font-size:16px; width:100%; height:28px; line-height:28px; text-align:left; top:0; left:0; padding-left:10px; overflow:hidden; } .ytvideo .yt_ft { font-size:11px; width:100%; bottom:0; left:0; } .ytvideo img { display:block; max-width:100%; border:0; } .ytvideo a:after { content:"\A0\25BA"; position:absolute; width:60px; height:50px; left:0; top:0; right:0; bottom:0; margin:auto; border:0; border-radius:10px; color:white; background:rgba(0,0,0,.6); font-size:24px; line-height:50px; cursor:pointer; } .ytvideo a:hover:after { background:#CC181E; }
ANTELCO DB DOUBLE BARB REDUCING TEE 3 WAY CONNECTOR 13MM TO 4MM PACK OF 5
Antelco
£3.79
5 pieces of Antelco 13mm/13mm/4mm Reducing Tee Use this 13mm reducing to 4mm tee piece to easily install off-takes of micro supply pipe from 13mm supply pipe. To install this tee piece, cut the 13mm pipe in the desired location, insert the reducing tee inline of the pipe, then push the 4mm micro supply pipe to the outlet. Premium quality product made by Antelco Australia Fits 13mm ID (internal diameter) pipes including standard garden hose, PVC irrigation pipe, hozelock and soaker hose.  The reducing connection fits micro irrigation 4mm ID pipe. Double barb for increased retention. Sharp-edged barbs create leak-proof seal. UV stabilised plastic for long life With micro tube adapters there is a chance of a breach where water pressures fluctuate. This Antelco 13mm/13mm/4mm Reducing Tee Piece is ideal for situations where you really want to avoid a leakage. (Operating pressures should not exceed 300 kPa- pressure regulators available from our shop- if needed.) The Antelco 13mm/13mm/4mm Reducing Tee Piece is made from tough UV stable material for a long life . The materials used increase strength and give a superior quality that is heat, chemical and wear resistant.   Use this 13mm reducing to 4mm tee piece to easily install off-takes of micro supply pipe from 13mm supply pipe.
Antelco Rigid Riser - Irrigation Stake 5 Pack
Antelco
£3.90
Rigid Riser - Irrigation Stake 5 Pack , These are used to increase the height of the jet and are great for large flowerbeds where a greater coverage is needed.