ANTIHUMEDADES

Urine Repellent Water Based Eco - 5 Ltr
ANTIHUMEDADES
£294.28
Water repellent treatment of spreading The anti Liquid spreading is a 1-component Product of Direct application on the surfaces. Penetrates through the pores of the material for a better effectiveness against the discomfort and odours caused by the spreading. We have that clarify that cleaning is not a product of spreading; but that is used for preventive mode protecting the surface making the urine soaked bounce to the person. In this way, even though the dogs or people orinen on a facade, the liquid not penetrates in it and to avoid the smell is delivering in the facade. The repellent of urine leaves no glare or waxes in the Surface That Change the appearance of the stone, cement, brick,... nobody will know where has been applied, except because the urine rebotará on the wall and salpicará itself. This product is no anti-orines aggressive with the materials that make up the surfaces. Application of the repellent of urine, preventive treatment is a product of liquid consistency so that can be applied in multiple ways, brush, roller or airless sprayer (Low Pressure). Before applying the anti-orines, the surface should be clean of dust, Fats, Waxes and remnants of material that can be blended. If necessary clean with a water we leave to dry completely the material to which the water-repellent effect of anti-orines will not weaken. In some brackets, such as limestone, the effects may take a few days to be 100% effective. In case of polished stone, marble or, apply a layer of repellent of urine with a towel or microfibre glove and rub until the stand absorb all the product. The application of treatment anti-orines must be continuous, avoiding solapes or areas without product. It is recommended to apply the repellent of urine from below upwards to ensure that there are no areas in which has not been
hidrófugo Base Water antihumedades - 25 Ltr
ANTIHUMEDADES
£108.17
Water repellent without solvents of damp proof The water repellent base of damp proof is an eco-friendly water repellent that leaves no smell or have health risks. This repellent is allowed for the overstrapping of old buildings and property of heritage. Despite not contain solvents penetrates in depth in the pores of the material of construction. This is due to their nano-size particles that are so small that penetrates better in the pores. To protect the surfaces from the inside the water-repellent effect lasts much more protecting the moisture by water leaks. The water repellent without solvents of damp proof which prevents the water filter but maintains the natural breathability of the material of construction. Application of water repellent base of damp proof The form of this water repellent application is very simple, because that can be applied with backpack duster, low pressure (airless) spray, brush or roller. It is recommended to apply with the backpack or the spray because of this shape applies powder and guarantee that the homogeneous distribution of repellent is across the surface. In addition we support the input of product as the drop is much smaller in the spray. Before the Application of water repellent base of damp proof, we see that the surface is clean. Should not take fat, dust, oils, Arenillas, paint, or loose parts that can be blended after the application of water-repellent. If there are cracks exceeding 0.3 mm We Will Repair them to avoid that the water will drain through them, towards the interior of the housing. In the event that we need to make a gun cleaning with pressure we leave to dry at least 48 - 72 hours before making the hidrofugado of the surface. In this way we assure that the interior is completely dry and well pen
Eco Temporary Urine Repellent
Antihumedades
£465.54
Orines Repellent for events, parties and seasons This preventive urine detergent product comes ready to apply. It penetrates deep into the pores of the materials preventing urine from sticking to surfaces. This temporary urine repeller is designed for events occurring on the street, such as parties, concerts, horseback rides, since it lasts approximately 6 months. As a water-based product, its final cleaning and removal can be done with hot water or pressure water.
Filter Ventilation System Forced Sinco
ANTIHUMEDADES
£70.41
Forced ventilation system filters sinco The forced ventilation system sinco is the solution to the problems of moisture by condensation that are formed in the interior of the housing. The filter that takes in the interior is composed of polyester. The Polyester material is non-toxic and odorless with a great resistance. Allows to pass filtering the air leaving your step all the dirt, dust mites and spores that takes with him. In this way the air that enters through the forced ventilation system is clean of impurities. It is recommended to clean the filter every 4 or 6 months depending on the dirt of the outdoor environment. For cleaning simply we put under the tap and wash with water flow. Free to Leave dry air filter before fitting of new in the team of forced ventilation sinco. The filters with the passage of time and the washes also suffer wear so that the manufacturer sinco Recommended change every 3 or 4 years depending on the environmental dirt to those who are exposed.
hidrófugo Ecological antihumedades - 10 Ltr
ANTIHUMEDADES
£59.56
Water repellent without solvents of damp proof The water repellent base of damp proof is an eco-friendly water repellent that leaves no smell or have health risks. This repellent is allowed for the overstrapping of old buildings and property of heritage. Despite not contain solvents penetrates in depth in the pores of the material of construction. This is due to their nano-size particles that are so small that penetrates better in the pores. To protect the surfaces from the inside the water-repellent effect lasts much more protecting the moisture by water leaks. The water repellent without solvents of damp proof which prevents the water filter but maintains the natural breathability of the material of construction. Application of water repellent base of damp proof The form of this water repellent application is very simple, because that can be applied with backpack duster, low pressure (airless) spray, brush or roller. It is recommended to apply with the backpack or the spray because of this shape applies powder and guarantee that the homogeneous distribution of repellent is across the surface. In addition we support the input of product as the drop is much smaller in the spray. Before the Application of water repellent base of damp proof, we see that the surface is clean. Should not take fat, dust, oils, Arenillas, paint, or loose parts that can be blended after the application of water-repellent. If there are cracks exceeding 0.3 mm We Will Repair them to avoid that the water will drain through them, towards the interior of the housing. In the event that we need to make a gun cleaning with pressure we leave to dry at least 48 - 72 hours before making the hidrofugado of the surface. In this way we assure that the interior is completely dry and well pen
PAINTING Rubber Waterproofing antihumedades - 20 kg, white
ANTIHUMEDADES
£101.44
Rubber paint for waterproofing of external surfaces. The composition of the rubber damp proof waterproofing paint is a 1-component resin base with water. Between its main properties Features: Non-slip paint: completely adheres to the surfaces and prevents drops that occur by slipping. Elastic paint: thanks to its composition resin base has a great elasticity that allows bridging small cracks even after applied the paint. Not sticky or show. Paint Waterproof: Not its surface allows the water vapour to pass through to the interior of the housing, eliminating the moisture for leaks. Breathable: Although it is waterproof keeps the breathable properties of the surfaces. Of this form does not produce moisture by condensation in the interior for excess of insulation. passable: it can walk on the rubber paint while not in excess since it is not designed for this purpose. Durable: is a waterproofing paint with a high resistance to most harsh weather conditions: UV rays, acid rain, hail, snow, excess heat... Its composition to base of resin and its properties waterproofing prevents spores of mold or scum rooted in its surface. In this way we are precluding appearance of stains and hierbajos in its surface. Form of application of the paint rubber damp proof The rubber waterproofing paint can be applied by brush or roller. Before applying it we check that the surface is clean of fats, oils, dust... Also that there are no loose parts that can fall out during the application. If to make the cleaning use water pressure we leave to dry at least 48 hours to make sure that the surface is dry. In this way the paint agarrará better in the material of Const
PAINTING Rubber Waterproofing antihumedades - 20 kg, color to measure
ANTIHUMEDADES
£101.44
Rubber paint for waterproofing of external surfaces. The composition of the rubber damp proof waterproofing paint is a 1-component resin base with water. Between its main properties Features: Non-slip paint: completely adheres to the surfaces and prevents drops that occur by slipping. Elastic paint: thanks to its composition resin base has a great elasticity that allows bridging small cracks even after applied the paint. Not sticky or show. Paint Waterproof: Not its surface allows the water vapour to pass through to the interior of the housing, eliminating the moisture for leaks. Breathable: Although it is waterproof keeps the breathable properties of the surfaces. Of this form does not produce moisture by condensation in the interior for excess of insulation. passable: it can walk on the rubber paint while not in excess since it is not designed for this purpose. Durable: is a waterproofing paint with a high resistance to most harsh weather conditions: UV rays, acid rain, hail, snow, excess heat... Its composition to base of resin and its properties waterproofing prevents spores of mold or scum rooted in its surface. In this way we are precluding appearance of stains and hierbajos in its surface. Form of application of the paint rubber damp proof The rubber waterproofing paint can be applied by brush or roller. Before applying it we check that the surface is clean of fats, oils, dust... Also that there are no loose parts that can fall out during the application. If to make the cleaning use water pressure we leave to dry at least 48 hours to make sure that the surface is dry. In this way the paint agarrará better in the material of Const
PAINTING Anti Humidity impermeabilizante antihumedades Sealant - 4 Ltr
ANTIHUMEDADES
£77.58
Waterproofing Paint Sealant Anti Humidity The Evil isolated or very porous surfaces allow moisture to drain through the material of construction. Allows the waterproofing paint anti humidity seal the surfaces for that no moisture back into the housing. It is recommended to apply the paint anti humidity waterproofing sealant in the surfaces or cold walls to touch, as are: External Walls, pillars, ceilings... This paint can be applied waterproofing sealant for painted finish or as anti humidity for insulating sealant to repaint above. Waterproofing Paint Sealant Anti Humidity The Evil isolated or very porous surfaces allow moisture to drain through the material of construction. Allows the waterproofing paint anti humidity seal the surfaces for that no moisture back into the housing. It is recommended to apply the paint anti humidity waterproofing sealant in the surfaces or cold walls to touch, as are: External Walls, pillars, ceilings... This paint can be applied waterproofing sealant for painted finish or as anti humidity for insulating sealant to repaint above. Before making the wallpaper is must verify that the surface is dry and clean of dust, Fats, Waxes, loose paint... The paint anti humidity sealant applicator apply a minimum of 2 coats by brush, roller or spray gun. The Waiting Time To Apply The 2 nd layer must be at least 3 hours. It is recommended to apply a quick drying solvent Universal in the first layer with a maximum of 10% Dilution. In this way we guarantee a greater grip of the paint on the surface. In the second layer must be avoided using solvent or if it is necessary to use the minimum possible. To add the solvent should be very well the paint remover for ho
PAINTING Rubber antihumedades with Thermal Properties for terraces - 15 Ltr, Light Grey
ANTIHUMEDADES
£149.20
Thermal paint for waterproofing terraces and passable surfaces. This thermal paint waterproofing is composed by a base of resin and ceramic micro spheres. These microsphere are filled with air so that after applying several layers form a virtual air mattress in the Surface That Break The Thermal Bridge. You can save up to 35% of energy (heating or air conditioning) with the aid of these ceramic micro spheres. The rubber is a paint passable and very resistant to adverse weather conditions so that is indicated for application in decking. The majority of the problems of leakage of water or moisture by condensation from the terraces. For this reason it is convenient and protect aislarlas correctly. In addition the rubber is a waterproofing paint with elastic properties which allows bridging without breaking the small cracks that form after applied the paint. Application of the thermal rubber paint for terraces of damp proof The application of this thermal paint is made simple by roller or brush. The single point to keep in mind is that cannot be remove with electric mixer since the vibration could break the ceramic microsphere and losing thermal properties. To make the rubber mixture before starting to paint you remove manually with a stick or a rod of slowly. The surface where it is going to make the waterproofing must be dry and clean. We put special attention to fats, oils and water that can take in the time of the application. Well ensure greater adhesion of the paint of thermal rubber to the material of construction. The performance is approx 1 kg/m2 already applied to 3 - 4 Hands that are recommended to apply to form a good virtual air mattress.
PAINTING Rubber antihumedades with Thermal Properties for terraces - 15 Ltr, White
ANTIHUMEDADES
£149.20
Thermal paint for waterproofing terraces and passable surfaces. This thermal paint waterproofing is composed by a base of resin and ceramic micro spheres. These microsphere are filled with air so that after applying several layers form a virtual air mattress in the Surface That Break The Thermal Bridge. You can save up to 35% of energy (heating or air conditioning) with the aid of these ceramic micro spheres. The rubber is a paint passable and very resistant to adverse weather conditions so that is indicated for application in decking. The majority of the problems of leakage of water or moisture by condensation from the terraces. For this reason it is convenient and protect aislarlas correctly. In addition the rubber is a waterproofing paint with elastic properties which allows bridging without breaking the small cracks that form after applied the paint. Application of the thermal rubber paint for terraces of damp proof The application of this thermal paint is made simple by roller or brush. The single point to keep in mind is that cannot be remove with electric mixer since the vibration could break the ceramic microsphere and losing thermal properties. To make the rubber mixture before starting to paint you remove manually with a stick or a rod of slowly. The surface where it is going to make the waterproofing must be dry and clean. We put special attention to fats, oils and water that can take in the time of the application. Well ensure greater adhesion of the paint of thermal rubber to the material of construction. The performance is approx 1 kg/m2 already applied to 3 - 4 Hands that are recommended to apply to form a good virtual air mattress.
PAINTING Rubber antihumedades with Thermal Properties for terraces - 15 Ltr, Wheat
ANTIHUMEDADES
£149.20
Thermal paint for waterproofing terraces and passable surfaces. This thermal paint waterproofing is composed by a base of resin and ceramic micro spheres. These microsphere are filled with air so that after applying several layers form a virtual air mattress in the Surface That Break The Thermal Bridge. You can save up to 35% of energy (heating or air conditioning) with the aid of these ceramic micro spheres. The rubber is a paint passable and very resistant to adverse weather conditions so that is indicated for application in decking. The majority of the problems of leakage of water or moisture by condensation from the terraces. For this reason it is convenient and protect aislarlas correctly. In addition the rubber is a waterproofing paint with elastic properties which allows bridging without breaking the small cracks that form after applied the paint. Application of the thermal rubber paint for terraces of damp proof The application of this thermal paint is made simple by roller or brush. The single point to keep in mind is that cannot be remove with electric mixer since the vibration could break the ceramic microsphere and losing thermal properties. To make the rubber mixture before starting to paint you remove manually with a stick or a rod of slowly. The surface where it is going to make the waterproofing must be dry and clean. We put special attention to fats, oils and water that can take in the time of the application. Well ensure greater adhesion of the paint of thermal rubber to the material of construction. The performance is approx 1 kg/m2 already applied to 3 - 4 Hands that are recommended to apply to form a good virtual air mattress.
Eco Reflective Panels For Radiators - 1 Unit
ANTIHUMEDADES
£8.60
Reflective Aluminium Foil And Insulating for radiators Saves you money and heating with the reflective strips of antihumedades. is The insulation sheet of aluminium is componene of 2 layers of aluminum 100% polyethylene insulation with bubbles. These sheets are well in a reflective thermal insulation and heat. The reflective strips help to break the thermal bridge preventing the loss of the radiators to heat through external walls of the housing. Reflective panels for damp proof Eco radiators are totally safe as it to be fire retardant and is not damaged or Arden by effect of heat. More Information and how to install the reflective panels for radiators: Example of heat loss in housing without reflective panels for radiators Heating savings of using reflective panels. The heat bounce and is within the housing The main disadvantage of the radiators of walls is that the heat is dispersed through sees them and is lost. With this type of sheets avoid these problems. Its composition of polyethylene and aluminium break the thermal bridge of the walls. It helps reflectir all the heat in the opposite direction to the wall. No special clamps are required for them. You only have to locate each sheet between the heater and the wall, so simple. Can be used with all types of radiators. This reflective insulation in sheets is slim, its thickness is about 4 mm, and also very lightweight.
PAINTING Thermal Eco antihumedades - 15 Ltr
ANTIHUMEDADES
£118.22
Economic Acoustic Thermal - Waterproofing Paint. The thermal paint of antihumedades. is formed by ceramic microsphere Air Filled. The microsphere are responsible for breaking the thermal with the outer and eliminate cold areas of walls and pillars. To remove these thermal bridges avoids the loss of heat in winter and cool in summer. As a result we are getting an important energy saving for the housing. The economic antihumedades. Thermal paint is a paint with a high power waterproof, it is also washable and durable. Thermal waterproofing do I need painting? The heat in the housing is badly Insulated escapes mainly through walls and ceilings. Waterproofing Paint surfaces with thermal achieved, thanks to the ceramic microsphere, reduce the loss of heat. This means that our heating systems to work less and save energy and money. HOW TO APPLY THE PAINT Thermal economic The thermal insulation economic waterproofing paint can be applied in any vertical surface (walls, columns, pillars...) or horizontal (ceiling) After application you will notice that the humidity by condensation is reduced or will have disappeared along with the feeling of cold. To apply the paint Thermal economic simply need a brush or a roller. What you should remember and take into account that must be manually remove to not break the ceramic microsphere that form the virtual air chamber. The thermal surfaces where waterproofing is to apply the paint must be dry and free of dirt. Should not be bubbles of paint lifted. In antihumedades. is we recommend applying a 3 or 4 layers of paint to get the virtual air mattress that is going to break the thermal bridge. Presented in white, but this type of paints S
PAINTING Rubber antihumedades with Thermal Properties for terraces - 15 Ltr, Beige
ANTIHUMEDADES
£149.20
Thermal paint for waterproofing terraces and passable surfaces. This thermal paint waterproofing is composed by a base of resin and ceramic micro spheres. These microsphere are filled with air so that after applying several layers form a virtual air mattress in the Surface That Break The Thermal Bridge. You can save up to 35% of energy (heating or air conditioning) with the aid of these ceramic micro spheres. The rubber is a paint passable and very resistant to adverse weather conditions so that is indicated for application in decking. The majority of the problems of leakage of water or moisture by condensation from the terraces. For this reason it is convenient and protect aislarlas correctly. In addition the rubber is a waterproofing paint with elastic properties which allows bridging without breaking the small cracks that form after applied the paint. Application of the thermal rubber paint for terraces of damp proof The application of this thermal paint is made simple by roller or brush. The single point to keep in mind is that cannot be remove with electric mixer since the vibration could break the ceramic microsphere and losing thermal properties. To make the rubber mixture before starting to paint you remove manually with a stick or a rod of slowly. The surface where it is going to make the waterproofing must be dry and clean. We put special attention to fats, oils and water that can take in the time of the application. Well ensure greater adhesion of the paint of thermal rubber to the material of construction. The performance is approx 1 kg/m2 already applied to 3 - 4 Hands that are recommended to apply to form a good virtual air mattress.
PAINTING Anti Humidity impermeabilizante antihumedades Sealant - 16 Ltrs
ANTIHUMEDADES
£250.70
Waterproofing Paint Sealant Anti Humidity The Evil isolated or very porous surfaces allow moisture to drain through the material of construction. Allows the waterproofing paint anti humidity seal the surfaces for that no moisture back into the housing. It is recommended to apply the paint anti humidity waterproofing sealant in the surfaces or cold walls to touch, as are: External Walls, pillars, ceilings... This paint can be applied waterproofing sealant for painted finish or as anti humidity for insulating sealant to repaint above. Waterproofing Paint Sealant Anti Humidity The Evil isolated or very porous surfaces allow moisture to drain through the material of construction. Allows the waterproofing paint anti humidity seal the surfaces for that no moisture back into the housing. It is recommended to apply the paint anti humidity waterproofing sealant in the surfaces or cold walls to touch, as are: External Walls, pillars, ceilings... This paint can be applied waterproofing sealant for painted finish or as anti humidity for insulating sealant to repaint above. Before making the wallpaper is must verify that the surface is dry and clean of dust, Fats, Waxes, loose paint... The paint anti humidity sealant applicator apply a minimum of 2 coats by brush, roller or spray gun. The Waiting Time To Apply The 2 nd layer must be at least 3 hours. It is recommended to apply a quick drying solvent Universal in the first layer with a maximum of 10% Dilution. In this way we guarantee a greater grip of the paint on the surface. In the second layer must be avoided using solvent or if it is necessary to use the minimum possible. To add the solvent should be very well the paint remover for ho
Universal Quick Drying Solvent antihumedades - 5 Ltr
ANTIHUMEDADES
£29.86
Fast drying solvent Universal This colorless liquid product is solvent and is suitable for use in both the cleaning the mixture of paints that support a fast drying solvent. To use the solvent for mixing with paint we take care in well remove the paint until the total homogenization. The Universal Quick drying Solvent, allowing the paints penetrate in depth in the surfaces to deal with a rapid evaporation. The proportions of the solvent as diluent must be adjusted to the manufacturer's instructions of the paint.
Water Based Eco Urine Repellent - 1 Ltr
ANTIHUMEDADES
£107.09
Water repellent treatment of spreading The anti Liquid spreading is a 1-component Product of Direct application on the surfaces. Penetrates through the pores of the material for a better effectiveness against the discomfort and odours caused by the spreading. We have that clarify that cleaning is not a product of spreading; but that is used for preventive mode protecting the surface making the urine soaked bounce to the person. In this way, even though the dogs or people orinen on a facade, the liquid not penetrates in it and to avoid the smell is delivering in the facade. The repellent of urine leaves no glare or waxes in the Surface That Change the appearance of the stone, cement, brick,... nobody will know where has been applied, except because the urine rebotará on the wall and salpicará itself. This product is no anti-orines aggressive with the materials that make up the surfaces. Application of the repellent of urine, preventive treatment is a product of liquid consistency so that can be applied in multiple ways, brush, roller or airless sprayer (Low Pressure). Before applying the anti-orines, the surface should be clean of dust, Fats, Waxes and remnants of material that can be blended. If necessary clean with a water we leave to dry completely the material to which the water-repellent effect of anti-orines will not weaken. In some brackets, such as limestone, the effects may take a few days to be 100% effective. In case of polished stone, marble or, apply a layer of repellent of urine with a towel or microfibre glove and rub until the stand absorb all the product. The application of treatment anti-orines must be continuous, avoiding solapes or areas without product. It is recommended to apply the repellent of urine from below upwards to ensure that there are no areas in which has not been