AptoFun

AptoFun Metal- Brass Filament (1,75mm, 25g, 190°C - 230°C) with premium quality for 3D Printer( MakerBot RepRap MakerGear Ultimaker etc.) / 3D pins
Aptotec
£6.02
TECHNICAL SPECIFICATIONS: Filament diameter: 1.75 mm Dimensional Accuracy: +/- 0.03 mm Recommended extrusion / die temperature: 190 ° C - 230 ° C Recommended speed: 50mm / s Optimum storage temperature: 5-30 degree Optimum storage humidity: 45% -75% AptoFun 3D printer Filament offers high-quality ABS / PLA / PVA / HIPS / PETG / TPU and wood 3D filament with vivid colors, especially metal / silk filament. This allows you to implement your ideas and concepts professionally. The filament is always round, without oily residue, even without air bubbles. We will soon have a filament 1 Kg / coil in the assortment. The current product is to try. If you are satisfied, simply contact us (e-mail in profile)
AptoFun 4 in 1 Dot Matrix MAX7219 MCU LED Display Module DIY Kit for Arduino
Aptotec
£9.85
Features: It is an integrated serial input/output common cathode display driver. Can be connected to microprocessor and 7-segment digital LED display of eight digits. Also can be connected to the bar graph display or 64 independent LED. Including type B BCD coder, multiple scanning circuit and segment driver. A static RAM(8 * 8) is used to save data. A convenient 4-wire serial interface can be connected to all general microprocessor. Only 3 IO interfaces are needed to drive a dot matrix display. Specifications: Material: PCB Operating Voltage: 5V LED Color: Red Screws Hole Aperture: 3mm Cable Length: 20cm Item Size: 12.8 * 3.2 * 1.5cm / 5 * 1.3 * 0.6in Item Weight: 51g / 1.8oz Package Size: 18 * 8.5 * 1.5cm / 7.1 * 3.3 * 0.6in Package Weight: 57g / 2oz
AptoFun BMP180 Digital Air Pressure Sensor Board Module 8-Pin for Arduino
Aptotec
£8.30
Features: Size: 1.4 x 1.2 cm Supply voltage: 1.8V to 3.6V (VDDA), 1.62V-3.6V VDDD) The pressure is in the range of 300 to 1100 hPa (Altitude9000m-500m) Low power consumption: 5?A LCC package The resolution is 0.06hPa (height 0.5 m) in low Power consumption model, while it is 0.03hPa (0.25M) in high liner model. This module is RoHS compliant without lead. MSL 1 Response Time: 7.5ms Standby Current: 0.1?A It does not need external clock circuit. This product can be applied to GPS accurate navigation, weather prediction, vertical speed display and so on.
AptoFun 5pcs hochwertige 3D Druckpapier für 3D Drucker Heizbett / Druckbett in Blau
Aptotec
£7.74
Feature Hochtemperaturbeständige für 3D Drucker Heizbett / Druckbett
AptoFun MAX7219 8 Digit Red LED Digital Display Module Board for Arduino / MAX7219 8-Digit Red LED Digital Tube Display Module Board for Arduino
Aptotec
£9.00
Feature: MAX7219 Dot matrix module MCU control LED Display DIY kit for Arduino Seamless Cascadable Arduino PIC 8x8 LED 5.5V matrix Max7219 5 x Dupond Cable •Flash Unit Speedlite YN560-II for Canon Nikon Pentax Panasonic olympus •circuit design:insulated gate bipolar transistor(IGBT) •ZOOM range:24.28.35.50.70.80.105MM •power supplu:4 xAA size batteries(Alkaline or Ni-MH are usable) •color temperature:5600K Package included: •1 X MAX7219 Dot matrix module MCU control LED Display DIY kit for Arduino Seamless Cascadable Arduino PIC 8x8 LED 5.5V matrix Max7219 5 x Dupond Cable
AptoFun 400 Contacts solderless breadboard lab experiment screening laboratory breadboard experiment board for Raspberry pi/Arduino
Aptotec
£4.00
Feature: 400 contacts Breadboard: - 1 x contact terminals 300 contacts - 2 x distribution terminal 100 contacts - 4 pole terminals - Phosphor Bronze plated spring terminals.
AptoFun CAN-Bus Shield MCP2515 with TJA1050 Receiver SPI Protocol for Arduino SCM 51 MCU ARM Controller Development Board
Aptotec
£9.00
Feature: Support CAN V2.0B specification, the communication rate 1Mb / S. 0 to 8-byte data field. The standard frame and expand the frame and remote frame. Power supply :DC 5V. Termination resistors:120 ohm. PCB Size: 4.0cm x 2.8cm ,Screw hole center spacing 23mm x 35mm. Working current: type value. 5mA. the working temperature: Industrial grade -40 ℃ to 85 ℃. SPI interface protocol control . Package including: *1pcs MCP2515 Controller Bus Module TJA1050 Receiver SPI Protocol for Arduino SCM 51
AptoFun 32x32 16-in-1 Dot Matrix LED Matrix MAX7219 Mcu LED Display for Arduino
Aptotec
£45.00
Description: The item can be connected to microprocessor and 7-segment digital LED display of eight digits. Multi-functional and practical. Features: It is an integrated serial input/output common cathode display driver. Can be connected to microprocessor and 7-segment digital LED display of eight digits. Also can be connected to the bar graph display or 64 independent LED. Including type B BCD coder, multiple scanning circuit and segment driver. A static RAM(8 * 8) is used to save data. A convenient 4-wire serial interface can be connected to all general microprocessor. Only 3 IO interfaces are needed to drive a dot matrix display. Specifications: Material: PCB Operating Voltage: 5V LED Color: Red Screws Hole Aperture: 3mm Cable Length: 20cm Item Size: 12.8 * 3.2 * 1.5cm / 5 * 1.3 * 0.6in Item Weight: 51g / 1.8oz Package Size: 18 * 8.5 * 1.5cm / 7.1 * 3.3 * 0.6in Package Weight: 57g / 2oz Package List: 1 * Module 1 * Cables
AptoFun 2.4
Aptotec
£15.99
Specification: Extensive bus interface Single chip solution for a liquid crystal QVGA TFT LCD display 240RGBx320-dot resolution capable with real 262,144 display color Support MVA (Multi-domain Vertical Alignment) wide view display Internal oscillator and hardware reset Partial drive function, enabling partially driving an LCD panel at positions specified by user Power saving functions 8-color mode standby mode sleep mode Low -power consumption architecture Size:530mm * 750mm The Screen include a controller S6D1121 replace of ILI9325, it¡¯s a support 8/16bit data interface , easy to drive by many MCU like STM32 ,AVR and 8051 etc. Support see our WIKi http://wiki.aptotec.de/ or our homepage/ support
AptoFun Nano V3.0 Pro with Org.ATmega328P / FT232RL Chip Development Board with USB Cable Compatible with Arduino
Aptotec
£9.00
Technical details: Apto® Nano 3.0 has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard + 5 V AREF jumper. Physic ally, it is missing power jack. The Nano is automatically sense and switch to the higher potential source of power, there is no need for the power select jumper. Nano's got the breadboard ability of the board Uino and the mini + USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). This new version 3.0 comes with ATMEGA328 which offer more programming and data memory space. It is two layers. That make it easier to hack and more affordable. You end up paying less with Nano than Mini and USB combined.'Specifications: Microcontroller Atmel ATmega328 Operating Voltage (Logic Level) 5 V Input Voltage (Recommended) 7-12 V Input Voltage (limits) 6-20 V Digital I/O Pins 14 (of which 6 provide PWM output) analog input pins 8 DC Current per I/O Pin 40 mA Flash Memory 32 KB (of which 2KB used by bootloader) SRAM 2 KB EEPROM 1 KB Clock Speed 16 MHz Dimensions 0.7 x 1.70 "'Features: Automatic reset during program download Power OK blue LED Green (TX), red (RX) and orange (L) LED automotive sensing/switching power input Small® Mini-B Male USB for programming and serial monitor ICSP header for direct program download Standard 0.1 spacing DIP (breadboard friendly) Manual Reset Switch Power: The Nano can be powered via the Mini-B USB connection, 6 - 20 V unregulated external power supply (pin 30), or 5 V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
AptoFun Wood Filament (1.75mm, 25g, 200 ° C - 220 ° C) with premium quality for 3D printers MakerBot RepRap MakerGear Ultimaker etc./ also for 3D pens
Aptotec
£5.16
TECHNICAL CHARACTERISTICS: Filament diameter: 1.75 mm Dimensional Accuracy: +/- 0.03 mm Recommended extrusion / die temperature: 200 ° C - 220 ° C Recommended speed: 30-60mm / s Optimum storage temperature: 5-30 degrees Optimal storage humidity: 45% -75%
AptoFun Metal- Red-Copper Filament (1.75mm, 500g, 190 ° C - 230 ° C) with premium quality for 3D printer MakerBot RepRap MakerGear Ultimaker etc. / also for 3D pens
Aptotec
£49.00
TECHNICAL SPECIFICATIONS: Filament diameter: 1.75 mm Dimensional Accuracy: +/- 0.03 mm Net weight per coil: 500g Recommendation Extrusion / Nozzle temperature: 190 ° C - 230 ° C Recommended speed: 50mm / s Optimum storage temperature: 5-30 degrees Optimum storage humidity: 45% -75% AptoFun 3D printer Filament offers high-quality ABS / PLA / PVA / HIPS / PETG / TPU and wood 3D filament with vivid colors, especially metal / silk filament. This allows you to implement your ideas and concepts professionally. The filament is always round, without oily residue, even without air bubbles.
AptoFun Prototyping Prototype Shield/ProtoShield and Mini Breadboard for Arduino Duemilanove
Aptotec
£5.16
Features: Prototype Size:7cm x 5.4cm x 2cm Mini breadboard size: 4.4 * 3.5 * 1cm The breadboard sticks on the prototype shield with its self-adhesive backing. The mini breadboard has 170 tie points. Small soldering area. SOIC place for IC. 1 reset button, 1 general use button, and 2 LED circuits can be used directly. Package Included: 1 * Arduino prototype shield 1 * Mini breadboard
AptoFun 4 Channel Relay Board Module for Arduino Raspberry Pi ARM AVR DSP PIC (4 channels)
Aptotec
£7.57
Feature: Output Channel: 4 Artwork consists Voltage: 5V Material: electron component, plastic Net Weight: 30g Switching capacity: DC: 30 V DC / 10 A AC voltage: 250 V AC / 10 A Mounting holes: 3mm Supply voltage (VCC): 5 V GND: Ground Logic input current: 4 mA Power take-up reel: 70 mA Coil resistance: 70 Ohms
AptoFun Dot Matrix MAX7219 Module Mcu LED Display Control Kit for Arduino/Rasperry Pi
Aptotec
£8.99
Feature: MAX7219 Dot matrix module MCU control LED Display DIY kit for Arduino Seamless Cascadable Arduino PIC 8x8 LED 5.5V matrix Max7219 5 x Dupond Cable Features: •Flash Unit Speedlite YN560-II for Canon Nikon Pentax Panasonic olympus •circuit design:insulated gate bipolar transistor(IGBT) •ZOOM range:24.28.35.50.70.80.105MM •power supplu:4 xAA size batteries(Alkaline or Ni-MH are usable) •color temperature:5600K Package included: •1 X MAX7219 Dot matrix module MCU control LED Display DIY kit for Arduino Seamless Cascadable Arduino PIC 8x8 LED 5.5V matrix Max7219 5 x Dupond Cable
AptoFun Dfplayer Mini MP3 Player Master Module with Simplified Output Speaker for Arduino
Aptotec
£8.35
Description: Sing for the moment! The DFPlayer Mini is a small and low cost MP3 module with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities. The DFPlayer perfectly integrates hard decoding module, which supports common audio formats such as MP3, WAV and WMA. Besides, it also supports TF card with FAT16, FAT32 file system. Through a simple serial port, you can play the designated music without any other tedious underlying operations. APPLICATIONS: Car navigation voice broadcast; Road transport inspectors, toll stations voice prompts; Railway station, bus safety inspection voice prompts; Electricity, communications, financial business hall voice prompts; Vehicle into and out of the channel verify that the voice prompts; The public security border control channel voice prompts; Multi-channel voice alarm or equipment operating guide voice; The electric tourist car safe driving voice notices; Electromechanical equipment failure alarm; Fire alarm voice prompts; The automatic broadcast equipment, regular broadcast. SHIPPING LIST DFPlayer Mini x1
AptoFun Mk3 Aluminium 3D Printer Heated Bed 220 x 220 x 3 mm 385 g with Round Corners for Reprap 3D Printer
Aptotec
£22.99
Mounting Method: Dual power supply. Operate at 12 Volt or 24 Volt with thinner wires. As picture shows, same Mounting Method at 12V and 24V CHARACTERISTICS: Resistance at 12 Volt setting is between 1.0 and 1.25 Ohm (115~144 Watt) Resistance at 24 Volt setting is between 4.0 and 5.0 Ohm (144 ~115 Watt) 110 degrees Celsius possible for both 12 Volt and 24 Volt Running 24 Volt on the 12 Volt terminals will heatup the heatbed to 100 degree in only 2 minutes (will also consume up to 576 Watts!!) Maximum temperature rating: 180 degree Celsius Flatness across surface is approximately within +-0.2mm Material: Allu Special Function: highback Resistance Point Contact Diode Function: Darlington triode Usage: Mixer diode Structure: NPN