Ardex

ARDEX A45 ARDURAPID 11kg
Ardex
£30.98
Rapid Drying Internal Repair Mortar ARDEX ARDURAPID A 45 is a rapid drying and hardening, slump free mortar for internal repairs. Receives finishes after 90 minutes regardless of thickness Slump free - ideal for vertical and horizontal repairs Ideal for the rapid repair of internal concrete, screeds, renders and concrete steps Other applications include forming ramps, falls and coves, patching around fittings/pipework, and filling cracks and gaps Unit Size Available: 11kg bags Coverage: Approximately 7m2 at 1mm thick per 11kg unit
Ardex K15 New Rapid set levelling compound 22kg
Ardex
£30.30
ardex k15 new 22kg by ardex product levelling compound colour n/a size (kg) 22 pack quantity 1 manufacturer ardex origin uk pack coverage (sq mtr) 5. 25m2 3mm thick setting time 2hrs origin uk suitable for: wall x floor interior exterior x swimming pool x pathway x commercial area flexible full description ideal for fast track installations, ardex k 15 new is walkable after 2 hours, and floorcoverings can be applied the next day, regardless of thickness. Rapid hardening - walkable after 2 hours receives floorcoverings the next day, regardless of thickness apply from feather edge up to 35mm thick can be applied by trowel or pump strong, pressive strength suitable for floors with underfloor heating pumpable unit size available: 22kgcoverage: approximately 5. 25m2 at 3mm thick
Ardex Feather Finish Rapid Drying Patching & Smoothing Compound 11Kg
Ardex
£66.98
ARDEX FEATHER FINISH is an ultra rapid drying patching and smoothing compound, which provides a high bond strength to concrete, plywood, sand/cement screeds, existing smoothing compounds and ceramic tiles, without the need to prime. Designed for use in commercial and domestic locations, prior to the installation of resilient floorcoverings such as luxury vinyl tiles or sheet vinyl etc, ARDEX FEATHER FINISH is ideal for the rapid skimming of plywood, patching, filling and feather finishing daywork joints, ridges, gouges, depressions, and uneven trowel marks, etc., in the subfloor, as well as smoothing joints between staggered plywood sheets.
Ardex Feather Finish (11kg)
Ardex
£74.09
StyccoBond F41 is a solvent free acrylic polymer emulsion adhesive that contains a rust inhibitor. It is designed to provide a permanently tacky film which prevents 'looselay' carpet tiles from moving under normal traffic but enables them to be lifted and replaced easily when required. It is non-flammable, is protected against biodegradation, is suitable for use over normal underfloor heating installations, is resistant to plasticiser migration and will withstand normal wet cleaning techniques. STYCCOBOND F41 can be used for securing a wide range of dimensionally stable "lay flat" carpet tiles backed with bitumen/felt, non-woven fabric, PVC and other polymer backings. See the Recommended Adhesives Guide for details of specific floorcoverings. STYCCOBOND F41 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard. STYCCOBOND F41 can also be applied to non-absorbent subfloors such as STOPGAP waterproof surface membranes, STOPGAP ISOlATOR, Raised Access Flooring Panels, Steel, Terrazzo, Granolithic, linoleum and Vinyl floorcoverings. Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.
Ardex R4 Rapid Universal Spatula 2.5 kg bucket with Ardu Rapid® effect white cement Base. Stable Repair Spatula with Finish Character.
ARDEX
£20.33
Universal Quick spatula with Ardu Rapid® effect. White Concrete Base. Stable repair spatula with finishing appearance. Works on almost all commonly used surfaces without primer. For the wall, ceiling and floor area. To fill of holes and bursting. For levelling and Beispachteln Height Versätzen, transitions and irregularities. For spot Spachtelungen. For rapid lock of metal, joints and mounting angles. Revision after 45 - 60 minutes Quick drying. Extends to zero. Pure white is a fantastic addition to any home. Area of application: Straightening Smoothing walls top and bottom for attaching wallpapers, coats is good, emulsion Cleaning, wall and floor coverings on absorbent and non absorbent surfaces. Fill cracks, deep holes slots and joints. In the base to revision of bumps and trowel fall on plaster and cement fillers. For rapid lock of metal, joints and mounting angles. As Drywall 'system for fast Auszuführende mobile phone repair. For indoor use. Can be used in flat palette knife work in coating thickness from 0 to 10 mm. Type: Special cements, well Dispergierfähiges Plastic powder and Feinstkörnige fillers. When you mix with water to create a stable mortar that can be manipulated for about 15 minutes and ready to fill with within 30 - 45 minutes through hydration and drying Verfestigt. Updates for use with all flooring (parquet with ARDEX SMP adhesives) is as absorbent surfaces after about 45 minutes., Approx 60 minutes when not in absorbent surfaces. Container size: 2.5 kg bucket
Mayfair Feather Finish Compact 07 Sunglow Shade Pressed Powder
Mayfair
£4.23
Feather Finish Pressed Face Powder continues to offer the combination of excellent performance with positive skin caring benefits. Quick and easy to apply, the super-fine powder can be worn over foundation or alone giving long-lasting natural colour, shine-free coverage and a silky smooth finish. This powder is enriched with vitamin E and camellia extracts renowned for their skin care properties. An extensive range of flattering shades to suit all skin tones is available in a handy, twist lid refill complete with soft, washable puff.
Ardex - Feather Finish (5kg)
Ardex
£50.06
StyccoBond F41 is a solvent free acrylic polymer emulsion adhesive that contains a rust inhibitor. It is designed to provide a permanently tacky film which prevents 'looselay' carpet tiles from moving under normal traffic but enables them to be lifted and replaced easily when required. It is non-flammable, is protected against biodegradation, is suitable for use over normal underfloor heating installations, is resistant to plasticiser migration and will withstand normal wet cleaning techniques. STYCCOBOND F41 can be used for securing a wide range of dimensionally stable "lay flat" carpet tiles backed with bitumen/felt, non-woven fabric, PVC and other polymer backings. See the Recommended Adhesives Guide for details of specific floorcoverings. STYCCOBOND F41 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard. STYCCOBOND F41 can also be applied to non-absorbent subfloors such as STOPGAP waterproof surface membranes, STOPGAP ISOlATOR, Raised Access Flooring Panels, Steel, Terrazzo, Granolithic, linoleum and Vinyl floorcoverings. Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.
Ardex Feather Finish 10 lbs Bag & Floor Patching Trowel by Body-N-Home
Body-N-Home
£107.60
Gives a smooth, permanent finish to a variety of substrates; Colour: Gray; 10 lb Bag; Coverage : 33.3 Sqft per bag at 1/8; Smooth/Straight Edge Floor Patching Trowel 9-1/2 x 4.
ARDEX ST Natural Stone Silicone 310 ml Cartridge (Anthracite)
ARDEX GmbH
£12.08
Ardex ST Natural Stone Silicone Silicone sealant with fungicidal equipment (neutral networking) Elastic closure for movement, corner and connection joints indoors and outdoors. Grout natural stones of marble, granite, quartzite, gneiss, Solnhofener slabs etc. Grout natural stones and tiles in swimming pools Easy to spray and smooth Good adhesive properties Resistant to weather influences, UV rays, as well as standard cleaning and disinfectants Application: Inside and Out. Wall and floor Elastic closure of movement, corner and connection joints. In bathroom, shower and toilet In the living area for natural stone coverings, on doors, windows and installation elements. In natural stone coverings on balconies, terraces and on façades In natural stone and tile surfaces in swimming pools Product Specification: ARDEX ST is a one-component, neutral-meshing silicone sealant, which is easy to spray and very smooth. ARDEX ST is suitable for non-discolouration of natural stones such as marble, granite, quartzite, gneiss, Solnhofener slabs etc. in conjunction with ARDEX Primer SP1. Due to the high elasticity, stretching and compression movements are balanced up to 20% of the joint width. After curing, ARDEX ST is resistant to weather influences, UV rays, standard household cleaners and disinfectants. The joint can be easily cleaned. Thanks to the fungicidal equipment, fungal and mould infestations are prevented. Shades are matched to the ARDEX MG marble grout.
Ardex P51 5kg Adhesive + Base Coat and Ierdispersion Concentrate for Floors, Walls and Ceilings. Firm Primer with Application. Primer, Bridge and Pore Wasserhemmender Verschluss.
ARDEX
£55.60
Adhesive + primer dispersion concentrate suitable for floors, walls and ceiling. Reliable primer with a wide range of applications. Primer, bonding agent and pore sealer with water repellent effect. Prevents air bubbles from rising up from the base surface during levelling and filling. Solvent-free. Application: primer, bonding agent and pore sealer with water repellent effect. For bonding powdery surfaces such as polished, absorbent calcium sulphate screeds. For priming cement screeds to accept fillers and levelling compounds. As a bonding agent on smooth concrete floors, compact cement screeds, hardened and tempered calcium sulphate screeds, terrazzo, sandstone and tile surfaces when using fillers and thin set mortar. As a bonding agent on existing substrates with adhesive filler compounds and adhesive residues. As a pore sealer on concrete floors and cement screeds: prevents air bubbles from rising up from the base surface during levelling and filling; prevents water absorption in subsequent filling. Primer for gypsum, calcium sulphate, and wood chipboard for thin set mortar. As a bonding agent on smooth concrete for gypsum bound wall fillers. Protective coating for dust binding on filling and levelling compounds which temporary serve as usable surfaces. For indoor use. Container size: 5 kg bucket.
Ardex St silicone sealant SPRING JASMINE
Ardex
£12.38
Ardex St silicone sealant is suitable for bathrooms and kitchens. Part of the co-ordinating colour series for Ardex FL and FS grouts
Ardex St silicone sealant WHITE
Ardex
£12.38
Ardex St silicone sealant is suitable for bathrooms and kitchens. Part of the co-ordinating colour series for Ardex FL and FS grouts
Casebau Case for 19
ARDEX
£12.37
For use with: Spreading and cleaning on rough masonry, concrete, aerated concrete, light weight construction, insulation and insulation boards in front of wallpaper and painting work. Fill large mouldings on walls and ceilings. Fill cracks, holes, slots and joints in plasterboard walls and other building boards. Smoothing Wall Surfaces From Calcium Silicate map stones and: Plan of the cabinet. Close the joints in concrete Fertigteil ceilings. Moving plaster boards. Verdübeln and making use of brackets for use with taps, installations and more.
Lecimo 50pcs White Kitchen Furniture Nano Magic Clean Focal Stains Sponge Removing Tool
Lecimo
£5.39
Specification: Material: Sponge Color: white Size: 10*6*2cm QTY:50pcs Applicable: kitchen and bathroom, office equipment, household appliances, leather, etc Product list: 50pcs*Kitchen dish sponge Note: 1.Please allow a little size error due to manual measurement. 2.Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the color tone of the website's photo and the actual item could be slightly different.
Ardex St silicone sealant DOVE GREY
Ardex
£12.38
Ardex St silicone sealant is suitable for bathrooms and kitchens. Part of the co-ordinating colour series for Ardex FL and FS grouts
Ardex - FA20 (20kg)
Ardex
£68.51
StyccoBond F41 is a solvent free acrylic polymer emulsion adhesive that contains a rust inhibitor. It is designed to provide a permanently tacky film which prevents 'looselay' carpet tiles from moving under normal traffic but enables them to be lifted and replaced easily when required. It is non-flammable, is protected against biodegradation, is suitable for use over normal underfloor heating installations, is resistant to plasticiser migration and will withstand normal wet cleaning techniques. STYCCOBOND F41 can be used for securing a wide range of dimensionally stable "lay flat" carpet tiles backed with bitumen/felt, non-woven fabric, PVC and other polymer backings. See the Recommended Adhesives Guide for details of specific floorcoverings. STYCCOBOND F41 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard. STYCCOBOND F41 can also be applied to non-absorbent subfloors such as STOPGAP waterproof surface membranes, STOPGAP ISOlATOR, Raised Access Flooring Panels, Steel, Terrazzo, Granolithic, linoleum and Vinyl floorcoverings. Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.