Armaflex

Armaflex Pipe Insulation Tape, 15m x 3mm x 50mm L414
Armacell
£8.34
Class O Armaflex Tape The professional insulation that prevents condensation and energy losses. Armaflex Tape is a highly flexible elastomeric material which is quick and easy to install and available in both tube and sheet form. It has a closed cell structure which has a built in vapour barrier with a high resistance to water vapour transmission enabling the insulation material to maintain a higher level of energy conservation efficiency. Class O Armaflex Tape is the ideal choice for insulating tanks, ductwork, large pipes or irregular shapes. Class O Armaflex Tape has an excellent fire safety performance achieving BS476 part 6 1989 for low fire propagation, producing minimal contribution to the overall heat release, and BS476 part 7 1987 for zero surface spread of flame. Class O Armafix pipe supports are recommended for use where thermal bridging may occur. This is particularly important on refrigeration and chilled water pipes where there is a possibility of condensation taking place, particularly between the pipe and it's fixing. In heating installations the use of pipe supports will generally improve energy conservation. The low thermal conductivity, 0.034 W/(m.k) at 0C, and good acoustic performance provide double benefits with one insulation system Closed cell structure provides a built in vapour barrier A high, 7000, resistance to water vapour transmission and water ingress, gives long term insulation efficiency for condensation control Low Toxicity Index for added safety assurance Class O fire category means low fire propagation index, producing minimal contribution to overall heat release, and a zero surface spread of flame for a high degree of fire protection and safety Excellent resistance to the effects of ozone, oil, chemicals, extreme weather conditions and wear & tear Dust, fibre and CFC free with an Ozone Depletion Potential of zero BS EN ISO 9002 and 14001 approval confirms continuity of quality.
Armaflex Selfseal (13x22) Class O Pipe Insulation, 13mm wall, suits 22mm diameter pipe, 2 metre length
Armacell
£3.63
Class O Armaflex Selfseal is a thermal insulation and lagging product fully slit along each length with two strips of double sided self adhesive tape pre-applied to each open slit surface. Specially developed to provide insulation where fast, secure installation is required and ideal for applications where working space is severely restricted, Class O Armaflex Selfseal insulation and lagging is easily applied by fitting the insulation and peeling back the self adhesive tape.
Armaflex Selfseal (25x35) Class O Pipe Insulation, 25mm wall, suits 35mm diameter pipe, 2 metre length
Armacell
£12.40
Class O Armaflex Selfseal is a thermal insulation and lagging product fully slit along each length with two strips of double sided self adhesive tape pre-applied to each open slit surface. Specially developed to provide insulation where fast, secure installation is required and ideal for applications where working space is severely restricted, Class O Armaflex Selfseal insulation and lagging is easily applied by fitting the insulation and peeling back the self adhesive tape.
Armaflex Selfseal (19x15) Class O Pipe Insulation, 19mm wall, suits 15mm diameter pipe, 2 metre length
Armacell
£4.89
Class O Armaflex Selfseal is a thermal insulation and lagging product fully slit along each length with two strips of double sided self adhesive tape pre-applied to each open slit surface. Specially developed to provide insulation where fast, secure installation is required and ideal for applications where working space is severely restricted, Class O Armaflex Selfseal insulation and lagging is easily applied by fitting the insulation and peeling back the self adhesive tape.
Handy 5 metre length of Armaflex Pipe Self Adhesive Insulation Tape 50mm wide 3mm thick
Armacell
£6.99
Handy 5 metre length of Armaflex Pipe Self Adhesive Insulation Tape 50mm wide 3mm thick
Armaflex Selfseal (19x22) Class O Pipe Insulation, 19mm wall, suits 22mm diameter pipe, 2 metre length
Armacell
£6.15
Class O Armaflex Selfseal is a thermal insulation and lagging product fully slit along each length with two strips of double sided self adhesive tape pre-applied to each open slit surface. Specially developed to provide insulation where fast, secure installation is required and ideal for applications where working space is severely restricted, Class O Armaflex Selfseal insulation and lagging is easily applied by fitting the insulation and peeling back the self adhesive tape.
Armaflex Class O (13x15x15m) Pipe Insulation, 13mm wall, suits 15mm diameter pipe, 15 metre coil.
Armacell
£24.12
CLASS O ARMAFLEX - The professional insulation that prevents condensation and energy losses Class O Armaflex is the flexible, closed cell, elastomeric, nitrile rubber insulation that offers reliable protection against condensation and effectively prevents energy loss. A highly efficient method of insulating hot and cold water services, chilled water lines, heating systems, air conditioning duct work and refrigerated pipe work for frost protection, energy conservation and condensation control. Armaflex is dust free, fibre free and CFC free with an ODP of zero which means an environmentally friendly product. The Competitive Advantage of Specifying Class O Armaflex Built in vapour barrier prevents condensation Reduces energy losses by up to 87% Lightweight and flexible, quick and easy installation with low maintenance requirements, resulting in time and cost savings Excellent resistance to the effects of ozone, oil and chemicals (consult product test list) Application Areas Process work Hot and cold water services Chilled water lines Heating systems Air conditioning ductwork Refrigeration pipework and ancillary equipment
Pipe Insulation 67mm Bore Armaflex 13mm Wall x 2m Class O Tube
Armacell
£11.91
Class O Armaflex is dust free, fibre free and CFC free with an ODP of zero. Its inherent attributes and combination of properties makes Armaflex a highly efficient method of insulating hot and cold water services, chilled water lines, heating systems, air conditioning ductwork and refrigerated pipework for condensation control, energy conservation and frost protection. Class O Armaflex is supplied as 2 metre tube lengths which can be easily cut and rejoined using Armacell 520 adhesive and Class O insulation tape. (Class O Armaflex is also available as self-seal 2 metre lengths, continuous un-slit coils and flat sheets). Class O Armaflex is ideal for all indoor insulation requirements - both domestic and industrial and can also be used outside in conjunction with further coverings e.g. Armaflex Armafinish Paint provides the requisite protection from both UV exposure and the elements. Additional covering systems are also available to provide specific protection for both industrial, mechanical and chemical applications. Class O Armaflex can be used at temperatures as low as minus 50 degrees centigrade and up to temperatures of 105 degrees Centigrade. For higher temperature applications, Armaflex HT would be a more suitable product alternative.
Armaflex Selfseal (09x22) Class O Pipe Insulation, 9mm wall, suits for 22mm diameter pipe, 2 metre length
Armacell
£2.91
Class O Armaflex Selfseal is a thermal insulation and lagging product fully slit along each length with two strips of double sided self adhesive tape pre-applied to each open slit surface. Specially developed to provide insulation where fast, secure installation is required and ideal for applications where working space is severely restricted, Class O Armaflex Selfseal insulation and lagging is easily applied by fitting the insulation and peeling back the self adhesive tape.
Armaflex Glue Brush 0,25ltr 520
Armacell
£11.87
Armaflex Adhesive 520 Tank 0,25ltr with brush application Temp Range: -58 to 158 degF (-50 °C to + 105 °C (we will prepare the lighting voltage according to the application up to 200 °C - for taping blades of rubber Sticking - for tubes made of rubber - Do not use with natural rubber HT
AF/Armaflex, IAFMC19500600, AF-19 mm, EA panel, black
Armacell
£66.45
With the new, flexible Armacell - insulating mats can be old roller shutter boxes quickly and easily sealed. The insulation is easy, e.g. with a utility knife, to the desired length cut to shape, and the glue binding quick and easy roller shutter box is held in place by yourself. The self-adhesive insulating mats are DIN and ISO certified, have a thermal conductivity of 0,034 W/mK (the small, the better) and high protection. You will receive the Armacell insulating mats in 3 different thicknesses 10 mm (1000 x 100 cm | 10 m²) 19 mm (3/4) (600 x 100 cm | 6 m²), as well as 33 mm/300 x 100 cm 3 m²). Benefits Easy mounting, Can be individually shortened , tested in accordance with DIN EN 12667, en iso 8497  - Thermal Conductivity of 0,034 W/(MK), small improves heat conductivity the more insulating effect. Building Material Class 1, CB S3D flame resistant DIN EN 13823, self-extinguishing Non Drip, wicks away no fire ; Euro Class B/Blue, S3, D0. Closed-cell micron foam structure, with  - High sound insulation, reduce sound transmission by up to 30 dB (a)  - High Water Vapour diffusion resistance, high resistance to water vapour diffusion (micron = 10,000) Fungal Attack, antimicrobial protection Microban protection, as well as additional protection against bacteria and mold  - Energy Cost Savings: thanks to the insulation mat reduces the heat loss through roller shutter box considerably. ; a Ungedämmte cutting is covered in an approximately 3.5 cm up to 4 times the heat conductivity. ; Other Applications: Hot and Cold Water Erleitungen, cool technology, heating systems, air conditioning and air conditioning, as well as manufacturing areas Box Contents 1 x Armacell insulation mat 600 x 100 cm (19 mm thick)
Armaflex Selfseal (09x35) Class O Pipe Insulation, 9mm wall, suits 35mm diameter pipe, 2 metre length
Armacell
£3.51
Class O Armaflex Selfseal is a thermal insulation and lagging product fully slit along each length with two strips of double sided self adhesive tape pre-applied to each open slit surface. Specially developed to provide insulation where fast, secure installation is required and ideal for applications where working space is severely restricted, Class O Armaflex Selfseal insulation and lagging is easily applied by fitting the insulation and peeling back the self adhesive tape.
42mm Pipe Lagging Armaflex selfseal 9mm Wall x 2m Pre Slit Class O Black Foam
Armacell
£4.00
Class O Armaflex Selfseal is a thermal insulation and lagging product fully slit along each length with two strips of double sided self adhesive tape pre-applied to each open slit surface. Specially developed to provide insulation where fast, secure installation is required and ideal for applications where working space is severely restricted, Class O Armaflex Selfseal insulation and lagging is easily applied by fitting the insulation and peeling back the self adhesive tape.
Armaflex Platte 19mm 330x330mm
Armaflex
£11.22
Armaflex is a highly flexible closed-cell insulating foam on synthetic rubber basis (Elastomer) with a high resistance to water vapour diffusion. This is especially interesting when cooling expensive hardware below room temperature. The resulting water condensation can easily result in shorts and seriously damage your equipment. We offer these sheets both self-adhesive and without an adhesive layer. Armaflex offers optimal protection! Easy to install, proven for years and still unmatched! Features: Flexible closed-cell foam material High diffusion resistance Low thermal conductivity Effectively prevents condensation Technical specifications: Colour: Grey Medium temperature: Max 105°C, min -50°C Flame retardant B1 according to DIN 4102 Size: 330x330mm Thickness: 19mm Dimensions: 1x Armaflex sheet 19mm 330x330mm Right isolate (Mainboard): Xpert-OC-Team
Armaflex Selfseal (25x22) Class O Pipe Insulation, 25mm wall, suits 22mm diameter pipe, 2 metre length
Armacell
£9.49
Class O Armaflex Selfseal is a thermal insulation and lagging product fully slit along each length with two strips of double sided self adhesive tape pre-applied to each open slit surface. Specially developed to provide insulation where fast, secure installation is required and ideal for applications where working space is severely restricted, Class O Armaflex Selfseal insulation and lagging is easily applied by fitting the insulation and peeling back the self adhesive tape.
54mm Pipe Lagging Armaflex selfseal 9mm Wall x 2m Pre Slit Class O Black Foam
Armacell
£5.91
Class O Armaflex Selfseal is a thermal insulation and lagging product fully slit along each length with two strips of double sided self adhesive tape pre-applied to each open slit surface. Specially developed to provide insulation where fast, secure installation is required and ideal for applications where working space is severely restricted, Class O Armaflex Selfseal insulation and lagging is easily applied by fitting the insulation and peeling back the self adhesive tape.
CO-13MM Class O Armaflex Flat Sheet 13mm x 2m x 0.5m
Armacell
£22.78
Insulation Material: Black Nitrile Foam Rubber Plain Sheet (Non Adhesive) Insulation Thickness: 13 mm Length: 2 metres Width: 0.5 metres
Armaflex Selfseal (13x15) Class O Pipe Insulation, 13mm wall, suits 15mm diameter pipe, 2 metre length
Armacell
£5.45
Class O Armaflex Selfseal is a thermal insulation and lagging product fully slit along each length with two strips of double sided self adhesive tape pre-applied to each open slit surface. Specially developed to provide insulation where fast, secure installation is required and ideal for applications where working space is severely restricted, Class O Armaflex Selfseal insulation and lagging is easily applied by fitting the insulation and peeling back the self adhesive tape.