Artex

Artex Powder 5Kg
Artex Rawlplug Ltd
£24.04
Artex Powder is used for preparing and texturing walls and ceilings. It is also suitable for plasterboard jointing and background preparation. It can be used to create a wide variety of designs and is easy to paint once dry. It dries to a premium quality crack resistant finish. In a light texture, a 5Kg bad will cover an area of up to 10 square metres and will be fully dry in 12-24 hours.
Artex Stipple Brush Stippler Stippling Hand Tools 6
Ramboo
£12.99
Artex Stippling Brush Features: DIY Quality that gives a professional finish An inexpensive way for the amateur decorator to obtain a professional finish. High-quality rubber bristle pad with light ABS plastic handle For creating a wide variety of texture patterns Rubber bristles to ensure best finish ABS Plastic base and handle Size 6" x 4" (150mm x 100mm)
Ronseal MPRMF12VP 1.8Kg Ready Mixed  Smooth Finish Multi-Purpose Interior Wall Filler with 50 Percent Extra
Ronseal
£5.95
The Ronseal Multi Purpose Wall Filler is a general purpose filler, based on Acrylic Polymer and fine Dolomite fillers, for interior and exterior use,and Surface dry in 1 to 2 hours. Ronseal multi-purpose produces an extremely smooth finish and has excellent application properties coupled with strength and flexibility. Ideal for making repairs to plaster, stone, concrete or wood. It is easy to sand and gives excellent adhesion, also gives a long lasting repairs that won't shrink or crack. Available in Tub or Tube format.Ronseal applicator included.Can be drilled once dried hard. Areas of use: Interior walls and ceilings.Application: Filling Knife.Drying time approx: 2 hours.Protection level: High. Available in various sizes.
Polycell Plaster Repair Polyfilla Ready Mixed - 2.5 L
Polycell
£11.00
Polycell Plaster Repair Polyfilla 2.5 Litre Ready Mixed PLCPRPS25L Polycell Plaster Repair Polyfilla is specially formulated to be much easier to apply than ordinary plaster. It is ready mixed with a light consistency which will not slump, shrink or crack and adheres strongly. It smooths out easily to a ready-to-decorate finish.For indoor use on plaster.Drying time: 24 hours +.Size: 2.5 litre tub. PLCPRPS25L
Artex Stipple Brush Stippler Stippling Hand Tools 8
Ramboo
£24.99
Artex Stippling Brush Features: Professional quality For creating a wide variety of texture patterns Rubber bristles to ensure best finish Polyurethane base and handle Size 8" x 6" (200mm x 150mm)
Durostrip Artex Remover 500ml
FUZE
£7.50
Durostrip Artex Remover is a professional quality Artex and textured paint remover. Developed to enable easy removal of Artex from walls and ceilings. A specially formulated Thixotropic (thickened) solution enables the remover to cling to vertical surfaces - no drips or runs, hence low waste.With a high boiling point which means very low evaporation which reduces any losses and increases effectiveness. Created to be friendly to use it is non toxic, non flammable, non corrosive and fully biodegradable. Durostrip Artex remover converts artex to an easily removed gel, which traps any asbestos that might be in the artex and stops it getting into the environment. Durostrip Artex Remover will not "wet" the underlying plaster, which minimises the risk of damaging the plaster when removing the softened artex. Usage Instructions: Apply generously over the Artexed areas with a brush. Leave until Artex has completely softened (This can take several hours depending upon ambient temperature and thickness of Artex) Remove softened Artex with a scraper. Repeat process as necessary. Allow to dry thoroughly before refinishing. 500g will cover up to 2-3 sq metres. Durostrip Artex Remover is suitable for use on walls and ceilings TIP: Let Durostrip do the work, cover the treated surfaces with cheap polythene dust sheets, to prevent drying out, and leave over night. NOTE: If the Artex is heavily painted, it is advisable to remove the paint first with Biostrip PLUS prior to using Artex Remover. Although this product is effective at softening artex, by its very nature artex removal is a fairly physical job. This should be taken into consideration before starting any project of this type.
Artex Thistle One Coat Plaster 7.5kg
Artex
£12.30
Image for illustration purposes only
Faithfull Texturing  8IN X 6IN
Faithfull
£24.44
Faithfull Texturing Brush 200 x 150mm FAITEXT86 A heavy-duty textured brush with rubber bristles for creating a stippling effect and other patterns associated with textured coating. Will wash out easily under cold water immediately after use. FAITEXT86
UniBond all Purpose No More Cracks Ready Mixed Filler Tub - 600 g
Henkel
£6.49
No More Cracks Ready Mixed 600g from Unibond
Durostrip Artex Remover 2.5 Litre
FUZE
£24.95
Durostrip Artex Remover is a professional quality Artex and textured paint remover. Developed to enable easy removal of Artex from walls and ceilings. A specially formulated Thixotropic (thickened) solution enables the remover to cling to vertical surfaces - no drips or runs, hence low waste.With a high boiling point which means very low evaporation which reduces any losses and increases effectiveness. Created to be friendly to use with low odour, low VOC's it is non toxic, non flammable, non corrosive and fully biodegradable. Durostrip Artex remover converts artex to an easily removed gel, which traps any asbestos that might be in the artex and stops it getting into the environment. Durostrip Artex Remover will not "wet" the underlying plaster, which minimises the risk of damaging the plaster when removing the softened artex. Usage Instructions: Apply generously over the Artexed areas with a brush. Leave until Artex has completely softened (This can take several hours depending upon ambient temperature and thickness of Artex) Remove softened Artex with a scraper. Repeat process as necessary. Allow to dry thoroughly before refinishing. 500g will cover up to 2-3 sq metres. Durostrip Artex Remover is suitable for use on walls and ceilings TIP: Let Durostrip do the work, cover the treated surfaces with cheap polythene dust sheets, to prevent drying out, and leave over night. NOTE: If the Artex is heavily painted, it is advisable to remove the paint first with Biostrip PLUS prior to using Artex Remover. Although this product is effective at softening artex, by its very nature artex removal is a fairly physical job. This should be taken into consideration before starting any project of this type.
UniBond all Purpose No More Cracks Ready Mixed Filler Tub - 600 g
Henkel
£6.49
No More Cracks Ready Mixed 600g from Unibond
Polycel Polytex Coarse White 2.5L Matt
Polycell
£18.48
Polycell Textured Ceilings is an easy way to achieve a textured finish. It covers minor cracks and blemishes up to hairline and, because it is flexible, they will not reappear. It is white, does not yellow and is easy to apply - the ideal way to restore old ceilings. An easy way to achieve a coarse, matt rippled or silk rippled textured finish. Permanently covers cracks and blemishes. White finish which does not yellow.
Everbuild FILLSKIM5 Fill 7 Skim 5L Tub
Everbuild
£15.87
Everbuild Fill 7 Skim - 5 Litre Tub EVBFILLSKIM5 Everbuild Fill & Skim is a revolutionary new ready mixed plaster substitute, formulated using lightweight polymer spheres, to produce an easy to spread and smooth product which enables all tradesmen and DIY enthusiasts to produce a quality finish, normally only associated with a time served plasterer.Fill & Skim dries to a hard but flexible finish and is therefore suitable for wall or ceiling application and will fill holes down to 25mm in one application and is the ideal choice for covering textured paint surfaces and for restoring old pitted/uneven plastered walls/ceilings in just one quick application. Fill & Skim is also the ideal choice for electricians, plumber, joiners and general builders as a one coat patching plaster for small repair jobs, e.g. over recessed cable trunking and around holes in walls where piping/sockets have been installed. Once, dry, Fill & Skim will not shrink, sag or crack and is ready to paint or paper 24 hours after application and finishes smooth and requires little or no sanding. Fill & Skim can be used for internal repairs over plaster, wood, brick, stone and rendering. EVBFILLSKIM5
Ronseal 36545 Multi-Purpose Smooth Finish Ready Mixed Wall Filler with 50 Percent Extra, White, 600 gm
Ronseal
£3.71
The Ronseal RSLMPRMF6VP is supplied in a Plastic tub with re-sealable lid.600g + 50%.
Polycel Polytex Ripple Ceiling 5 Ltr
Polycell
£31.42
Polycell Textured Ceilings is an easy way to achieve a textured finish. It covers minor cracks and blemishes up to hairline and, because it is flexible, they will not reappear. It is white, does not yellow and is easy to apply - the ideal way to restore old ceilings. An easy way to achieve a coarse, matt rippled or silk rippled textured finish. Permanently covers cracks and blemishes. White finish which does not yellow.
Durostrip Artex Remover 5 Litre
FUZE
£44.95
Durostrip Artex Remover is a professional quality Artex and textured paint remover. Developed to enable easy removal of Artex from walls and ceilings. A specially formulated Thixotropic (thickened) solution enables the remover to cling to vertical surfaces - no drips or runs, hence low waste.With a high boiling point which means very low evaporation which reduces any losses and increases effectiveness. Created to be friendly to use it is non toxic, non flammable, non corrosive and fully biodegradable. Durostrip Artex remover converts artex to an easily removed gel, which traps any asbestos that might be in the artex and stops it getting into the environment. Durostrip Artex Remover will not "wet" the underlying plaster, which minimises the risk of damaging the plaster when removing the softened artex. Usage Instructions: Apply generously over the Artexed areas with a brush. Leave until Artex has completely softened (This can take several hours depending upon ambient temperature and thickness of Artex) Remove softened Artex with a scraper. Repeat process as necessary. Allow to dry thoroughly before refinishing. 500g will cover up to 2-3 sq metres. Durostrip Artex Remover is suitable for use on walls and ceilings TIP: Let Durostrip do the work, cover the treated surfaces with cheap polythene dust sheets, to prevent drying out, and leave over night. NOTE: If the Artex is heavily painted, it is advisable to remove the paint first with Biostrip PLUS prior to using Artex Remover. Although this product is effective at softening artex, by its very nature artex removal is a fairly physical job. This should be taken into consideration before starting any project of this type.