Auctionz Ltd

7w GX53 LED Lamp Daylight Cool White Low Energy Saving Downlighter Kitchen Under Cabinet Lighting Replacement Light Bulb GX 53 Round Disc Style 240v Direct Replacement for CFL 9w 7w 13w Lamps

Notice: Undefined property: stdClass::$Manufacturer in /var/www/vhosts/wundr-shop.it/httpdocs/QualitTradeTools/brand/content.php on line 145

£5.89
7watt 6000k Cool white fluorescent bulb with GX53 cap widely used in cabinet lighting.
Hispec IP65 5w LED Emergency Bulkhead Light Universal Non or Maintained EM3 NM3
AuctionZ Ltd
£19.50
Universal LED Emergency IP65 Light Fitting (HSEM/LED) The newly launched well thought out LED Universal Emergency Fitting from Hispec, is supplied complete with legends and can be used as either a Maintained or Non - Maintained fitting. For installer convenience the gear tray is hinged and the diffuser utilises captive screws. This fitting is protected to IP65 from water ingress and is constructed from polycarbonate so it will give many years of service without discolouring. Can be used internally or externally. The polycarbonate construction also allows it to be used in areas where there is a risk of vandalism.
Hispec IP65 8w Emergency Bulkhead Light Universal Non or Maintained EM3 NM3
Auctionz Ltd
£17.95
The Universal 8w Emergency fitting from Hispec can be used as either a Maintained or Non-Maintained fitting. For installer convenience the gear tray is hinged and the diffuser utilises captive screws. This fitting is protected to IP65 from water ingress and is constructed from polycarbonate so it will give many years of service without discolouring. Features: Polycarbonate Body Internal Or External Use IP65 Legends Included Lamp Included Maintained Or Non-Maintained Attractive Design 110 Lumens Dimensions 345 x 110 x 80mm 2 Year UK Manufacturer Warranty
Newlec 2 Gang 45A DP Switch With Neon Polished Brass With Black Interior 45Amp Double Pole Mirror Finish Cooker Heater Control Large Plate SLim Design
Auctionz Ltd
£5.95
2 Gang 45A DP Cooker Heater Switch with Neon Indicator. High Quality Polished Brass Mirror Finish. Double Pole 2G 45 Amp Plate Switch
HiSPEC Remote Internal Photocell 20mm Thread Switch IP65 Rated Sensor

Notice: Undefined property: stdClass::$Manufacturer in /var/www/vhosts/wundr-shop.it/httpdocs/QualitTradeTools/brand/content.php on line 145

£9.95
Features: 2 Part Photocell Type: Electronic Sensor: Photodiode IP Rating: IP65 when fitted Voltage: 230v 50Hz On/Off Levels: ON 70 LUX Load: 2 x 400w Max Switching: 10A Will switch upto 400w LED Max
Robus RGX539WL IP44 9watts Ceiling or Wall Light 9w GX53 CFL Lamp Exterior Bulkhead (GLS equivalent = 40w) LOW ENERGY SAVING GX53 Metal External Outdoor Garden Security Round Circular Bulkhead Aluminium Vandal Resistant Driveway Stairs Steps Stairwell - Home, Office, Work, Business, etc

Notice: Undefined property: stdClass::$Manufacturer in /var/www/vhosts/wundr-shop.it/httpdocs/QualitTradeTools/brand/content.php on line 145

£11.89
7 watt 6000k Cool white fluorescent bulb with GX53 cap widely used in cabinet lighting.
Hispec IP20 5w LED Emergency Fire Exit Box Light Arrow Down Non or Maintained NM3 EM3
Auctionz Ltd
£23.55
The Hispec 5w LED universal emergency exit box is supplied complete with a screen printed legend and designed to be located over an exit door. Although prepared for maintained operation, the fitting can be easily adapted to be used as non-maintained.
Hispec 270 Degree PIR Movement Motion Detector Security Lamp Light Sensor Switch

Notice: Undefined property: stdClass::$Manufacturer in /var/www/vhosts/wundr-shop.it/httpdocs/QualitTradeTools/brand/content.php on line 145

£13.03
PIR (passive infrared) sensors are used to switch floodlights to give property owners comfort and advance warning of intruders and trespassers. They also act as a deterrent and play a major role in deterring burglers, trespassers, vandals and other un-invited night time visitors. This PIR sensor features a moveable head for optimal positioning and a built-in LUX function which detects daylight and darkness: set the LUX at your desired level and be secure in the knowledge that you can modify the sensor for maximum security on both lighter summer evenings and dark wintry afternoons. For added coverage this sensor will protect 270 degrees and is supplied with a corner bracket as well as a wall bracket to give the installer the greatest flexibility during installation. 270 Degree Cover 1200w Load (maximum 300w LED) Up To 11 Metre Detection Corner & Wall Bracket Included Adjustable Timer 10s To 8m Light Control 3 Lux To Daylight Installation Height 1.5m To 2.5m IP44, CE & RoHs Approved
5x Osram Dulux D/E 18W 827 Warm White 4pin G24q-2 G24q CFL PLC 4P Compact Fluorescent Lamp 18 Watt 827 Light Bulb Lamp for Office PL PLC PL-C Down Lights, downlights, downlighters, PL, display lights, shop, home, office, clinic, gym, etc..

Notice: Undefined property: stdClass::$Manufacturer in /var/www/vhosts/wundr-shop.it/httpdocs/QualitTradeTools/brand/content.php on line 145

£16.48
This trdae pack of quantity is 5 bulbs and the each are 18 watt low energy Osram Dulux D/E 4 pin compact fluorescent with a G24q base has a compact design and is dimmable with HF electronic control gear. The quality triphosphor coating gives this energy efficient compact fluorescent lamp excellent colour rendering. Ideal where light is required for extended time periods and in recessed ceilings where space is tight such as offices, shops, reception areas and entrances. Please be careful choosing your lamp as you can only replace like for like wattages. Technical Details: Wattage: 18W - Lumens: 1200 - Energy Rating: A - Base / Cap: GX24q-2 4 pin - Approx Life: 10000 Hrs - Colour / Finish: 827 Warm White - Colour Temperature: 2700 Kelvin Approximate Dimensions: Length 140mm (total length) Width 27mm Depth 27mm Manufacturer: Osram - Manufacturer Part Number: 4050300012148 - Weight: 88g
Schneider Electric Pre Wired Low Energy Saving Batten Lamp Bulb BC B22 Ceiling Wall Holders Holder White T2 Rated 100w 209431
Schneider
£6.00
FEATURE: Clear terminals for easy visibility and installation Ample wiring space with dour knockouts large capacity rear earth terminal. SPECIFICATION: Brand: Schneider Electric Pre wired batten lamp holder T2 rated 100w MAX Fits Standard Bayonet Cap / BC / B22 Lamp Dimensions: 90mm x 80mm
Hispec 24w Circular Slimline LED Panel Light 6400K Daylight Lamp Downlight

Notice: Undefined property: stdClass::$Manufacturer in /var/www/vhosts/wundr-shop.it/httpdocs/QualitTradeTools/brand/content.php on line 145

£24.95
This Hispec range of circular LED panels are the ideal replacement for existing PL fluorescent fittings. The panels create an even light distribution around walls and ceilings and can save up to 75% on energy costs per year. Not unlike our 40w square panels, they have an instant start up, are flicker-free and require zero maintenance once installed. Typical applications for these slimline panels would be in commercial offices, corridors, stairwells and hotels where rooms need to be lit for long periods of time and span a wide area. There are five models available 6w, 12w, 15w, 18w and 24w. Finished in white and supported by secure retaining clips, each panel delivers a higher than average light output. Each fitting has an integral driver. Features: High Light Output Colour 6400k Emergency Option Not Avablive Retaining Clips Low Wattage 120˚ Light Spread Operating Temperature -20˚ to +40˚ 1760 Lumens 300mm Diameter 280mm Cut Out 2 Year UK Manufacturer Warranty
Trade Pack 8x Osram Branded 6ft 180cm 28w = 70w T8 G13 Socket LED Tube Fluorescent Light Cool White Lamp Retro Fit Replacement 1800mm 180cm 4000k 840 1.5m High Efficiency Long Life
Osram
£169.95
Retrofit for T8 luminaires, easy plug and play solution for magnetic ballasts Made the highest quality standards Quick Simple and safe High effiency of up to 91lm/w Up to 68% energy savings Up to 30,000 hours Lifetime (L70/B50) Fast and frequent switching - Instant-on light w/o warm up phase and flickering - ideal usage with sensor. No rewiring necessary at CCG. Direct Retrofit for CCG luminaires; replacement oflamp and included starter. Energy savings of up to 66% compared toa 1.5 m T8 fluorescent lamp Energy Efficiency Rating: A LED lamp in T8 shape with G13 socket Length excl. pins: 1500 mm max For operation at magnetic ballast No rewiring necessary at CCG Direct Retrofit for CCG luminaires; replacement oflamp and included starter Extremely robust due to polycarbonate body Powerfactor > 0.9 Switching cycles > 200.000 Overpower, overheat and short circuit protected RoHS-conformity, no mercuryProduct benefits: Energy efficiency A Energy savings of up to 66% compared toa 1.5 m T8 fluorescent lamp High switching cycles Mercury-free and RoHS-compliant Type of protection: IP20
Hispec 24w Circular Recessed Ceiling Slimline LED Panel Light 6400K Daylight Office, Shop, Home Hallway, Bedroom Lamp Downlight
HiSPEC
£24.95
This Hispec range of circular LED panels are the ideal replacement for existing PL fluorescent fittings. The panels create an even light distribution around walls and ceilings and can save up to 75% on energy costs per year. Not unlike our 40w square panels, they have an instant start up, are flicker-free and require zero maintenance once installed. Typical applications for these slimline panels would be in commercial offices, corridors, stairwells and hotels where rooms need to be lit for long periods of time and span a wide area. Finished in white and supported by secure retaining clips, each panel delivers a higher than average light output. Each fitting has an integral driver.
Hispec 18w Circular Recessed Ceiling Slimline LED Panel Light 6400K Daylight Office, Shop, Home Hallway, Bedroom Lamp Downlight
HiSPEC
£18.95
This Hispec range of circular LED panels are the ideal replacement for existing PL fluorescent fittings. The panels create an even light distribution around walls and ceilings and can save up to 75% on energy costs per year. Not unlike our 40w square panels, they have an instant start up, are flicker-free and require zero maintenance once installed. Typical applications for these slimline panels would be in commercial offices, corridors, stairwells and hotels where rooms need to be lit for long periods of time and span a wide area. Finished in white and supported by secure retaining clips, each panel delivers a higher than average light output. Each fitting has an integral driver.
Hispec 12w Circular Recessed Ceiling Slimline LED Panel Light 6400K Daylight Office, Shop, Home Hallway, Bedroom Lamp Downlight
HiSPEC
£12.95
This Hispec range of circular LED panels are the ideal replacement for existing PL fluorescent fittings. The panels create an even light distribution around walls and ceilings and can save up to 75% on energy costs per year. Not unlike our 40w square panels, they have an instant start up, are flicker-free and require zero maintenance once installed. Typical applications for these slimline panels would be in commercial offices, corridors, stairwells and hotels where rooms need to be lit for long periods of time and span a wide area. Finished in white and supported by secure retaining clips, each panel delivers a higher than average light output. Each fitting has an integral driver.
4foot 4' 4ft LED Low Energy Single Tube Strip Light batten 1200mm Fitting T8 Fitting 18w = 36w Daylight Cool White
Auctionz
£27.95
BENEFITS Effective, high-quality batten for a single T8 LED lamp Easy fixing to ceiling with baseplate on which all the electrical and mechanical components are mounted FEATURES T8 LED lamp Suitable for both direct and indirect lighting APPLICATION Offices Retail Industry Under-shelf lighting Cove lighting SPECIFICATION Height: 57 mm Width: 1250 mm Length: 100 mm Voltage: 230 V Energy Efficiency Rating: A Bulb Size: Coolwhite 5000k T8 LED Tube Includes: Tube Tube Number: Single Tube Practical and energy-efficient tube light fitting supplied with LED tube
Hispec 6w Circular Recessed Ceiling Slimline LED Panel Light 6400K Daylight Office, Shop, Home Hallway, Bedroom Lamp Downlight
HiSPEC
£8.95
This Hispec range of circular LED panels are the ideal replacement for existing PL fluorescent fittings. The panels create an even light distribution around walls and ceilings and can save up to 75% on energy costs per year. Not unlike our 40w square panels, they have an instant start up, are flicker-free and require zero maintenance once installed. Typical applications for these slimline panels would be in commercial offices, corridors, stairwells and hotels where rooms need to be lit for long periods of time and span a wide area. Finished in white and supported by secure retaining clips, each panel delivers a higher than average light output. Each fitting has an integral driver.
HiSPEC Electronic Photocell Kit IP65 Wall Mounted Omni Directional Switch
HiSPEC
£7.69
Typical Load: 2 x 400w HPS/2000w Tungsten Max Capacity: 10A On/Off Levels: 20/80 LUX (1:1.5 +VE) Supply: 198-264VAC 50Hz Operating Temperature: -20°C + 80°C Switching Delay: 15 Seconds Consumption: Less than 1w Approvals: EN50081-1 Emissions Complete With Bracket IP65 Rated
10x Hispec 5ft Single Ended 25w = 58w Low Energy Saving LED T8 Tube Fluorescent Lamp Replacement Day Light 1500mm
Hispec
£199.95
The Hispec range of LED tubes have been specifically designed to not only replace existing T8 fluorescent tubes but also to produce the maximum level of light output when doing so. This robust range of tubes are produced from high grade polycarbonate which is both durable and colour fast, ideal for any environment. Each tube has an integral driver and comes with an LED strip comprised of Epistar branded SMDs. This product range will drastically reduce both your electricity bills and carbon footprint due in part to its low wattage and efficient beam angle of 180 degrees. Unlike some of the other LED tubes on the market, our light output is not compromised by the low wattages because we have a built in aluminium reflector that maximises the level of lumens being produced. In order to convert a building or project from fluorescent to LED, cutting their energy costs by over 50% in the process, a qualified electrician can change a T8 fluorescent non-corrosive fitting into an LED-ready body by following a few simple steps (provided). This process is a cheaper and more efficient way of lowering costs compared to removing the whole fitting and replacing it with an LED equivalent.