AV Link

AV:Link | 2:4 Audio management speaker selector with volume controls
AV Link
£95.06
2:4 AUDIO MANAGEMENT SPEAKER SELECTOR WITH VOLUME CONTROLSThis matrix switcher for stereo amplifiers has 2 inputs and 4 outputs. Any of the inputs may be routed to any of the outputs or the same input may be routed to all outputs or any combination. Simply connect the output of the amplifiers to the inputs these inputs can then be routed to four different stereo speaker sets in four different locations each speaker set can be individually activated via the push buttons on the front of the box and individual volume controls.Enables four pairs of speakers to be connected to two separate amplifiers* Heavy-duty push-buttons* Built-in overload protection* 8 Ohm speakers recommended for best performance but will also work with 4-16 ohm speakers* Black aluminium housing* Individual volume controls with black aluminium finish* Accepts up to 14 gauge speaker cable* Individual A/B switch per zone* Wiring Gauge14 to 22 gauge* Inputs2 x stereo* Outputs4 x stereo @ 4 to 16 ohms* Power per channel 100W max.* Dimensions 432 x 133 x 64mm* Weight 3.67kg
av:link 8 Way Selector Switch
av:link
£34.99
8-WAY LOUDSPEAKER SELECTOR This switcher unit allows the distribution of a stereo amplifier. Simply connect the speaker output of an amplifier to the box this output can then be distributed to up to eight different stereo speaker sets in eight different locations each speaker set can be individually activated via the push buttons on the front of the box. Ideally suited for buildings where an independent sound control is required for different rooms or zones. Enables eight pairs of speakers to be connected to a single stereo amplifier * Heavy duty push-buttons * Built-in overload protection * Spring clip terminals * Designed for 4-16 ohms speakers * Wiring Gauge14 to 22 gauge * Input1 x stereo * Output8 x stereo * Power per channel 100W max. * Dimensions 432 x 125 x 55mm * Weight 2.08kg
4 Way Loudspeaker Selector
AVSL
£24.46
4-WAY LOUDSPEAKER SELECTORThis switcher unit allows the distribution of a stereo amplifier. Simply connect the output of an amplifier to the box, this output can then be distributed to up to four different stereo speaker sets in four different locations, each speaker set can be individually activated via the push buttons on the front of the box. Ideally suited for buildings where an independent sound control is required for different rooms or zones.Enables four pairs of speakers to be connected to a single stereo amplifierHeavy duty push-buttonsBuilt-in overload protectionDesigned for 4-16 ohms speakersSpring clip terminalsWiring gauge: 14 to 22 gaugeInput: 1 x stereoOutput: 4 x stereoPower per channel: 140W max.Dimensions: 215 x 110 x 45mmWeight: 1.2kg
QED SS20 2-Way Parallel Speaker Switch
QED
£65.00
Use this simple box to connect and switch two pairs of speakers.
AV:Link | Mono Earphone - Black
AV Link
£5.70
ME22 Mono earphone , ME22 MONO EARPHONE , This single, high quality earpiece is fully adjustable and designed to hook over either the left or right ear with a soft earpad for comfort. This earphone produces crystal clear sound whilst the design allows for outside sound to be heard, making this ideal for mobile and security communications. , Adjustable hinged 'ear-hook' to fit either ear Mylar speaker , Cable - 1.2m Connector - 3.5mm mono jack Frequency response - 20Hz-20kHz Impedance - 32 Ohms (±10%) Sensitivity - 99dB @ 1kHz Speaker size - 22mmØ
Magic Eye  Remote Control Extender
AV link
£6.10
'MAGIC EYE' REMOTE CONTROL EXTENDERIt operates between the RF2 output on a satellite receiver (from which it receives the 9Vdc it needs to power it) and an additional TV. The unit sends the remote control signals from the 'Magic Eye' back to the satellite receiver via the same coaxial cable that is sending the pictures to the additional TV.
AV Link Ground Loop Isolator
AVSL
£4.50
A low level filter designed to isolate the ground between source and amplification to prevent noise or hum. Can be used for in-car applications to eliminate alternator and engine noise or any audio installation that suffers from ground loop (mains) hum. Simple in-line connections (phono plugs to phono sockets) make for easy installation and no external power is required. Gold plated connections. Dimensions (WxHxD): 77x48x28mm
Av:link Professional Headphone with Volume Control
chord
£3.67
PSH40VC PROFESSIONAL HEADPHONES WITH VOLUME CONTROLHigh quality stereo headphones that offer superb, clean sound quality and comfort. Ideal for Hi-Fi listening and monitoring applications. 40mmØ drivers deliver a deep bass sound Adjustable padded headband and earcups for added comfort Single side cable entry In-line volume control OFC Litz cable and gold plated connector for optimum signal transfer Supplied with gold plated 3.5mm to 6.3mm stereo jack adaptor Cable2.0m (±10%) Connector3.5mm stereo jack Frequency response20Hz-24kHz Impedance32 Ohms Power500mW Sensitivity102dB @ 1kHz Speaker size40mmØ
B-Tech BT12 2-Way Speaker Control (Screw Terminals) in Silver
B-Tech
£16.99
BTech 2Way speaker selector switch with screw terminals Silvers BT12S AV Switchers
QED SS40 4-Way Speaker Switch
QED
£88.85
Allows up to four pairs of speakers to be connected to a single pair of speaker outputs and be independently switched.
4 Way Loudspeaker Selector
AVSL
£15.68
4-Way Loudspeaker Selector - black version , 4-WAY LOUDSPEAKER SELECTOR , This range of compact switch allows for two or four pairs of speakers to be connected from one amplifier, giving the ability to select any pair individually or all together. This can be a quick solution for the zoning of a sound system or for adding extra speakers to a single amp. , Enables two or four pairs of speakers to be connected to the stereo output of an amplifier Heavy-duty rocker switches Each pair can be selected individually or both together Designed for 8 ohms speakers Spring clip terminal connections , Power per channel - 50W max. Dimensions - 170 x 47 x 117mm Weight - 391g
Adwits 4-Channel Speaker Switcher Selector Box with Terminal Claps 200W RMS Max 100W Switchable, Black
ADWITS
£19.55
Adwits 4-Channel Speaker Switcher Selector Box with Terminal Claps The 4 Loudspeaker Switching Console is designed to distribute loudspeaker output signals of audio amplifiers to different loudspeakers in a switchable mode, for connecting to loudspeaker outputs of audio amplifiers and outputs of passive loudspeakers FEATURES Suitable for loudspeakers from 4ohms to 16ohms Screw terminals for strong connection and minimal loss.strong, stylish metal casing Operating conditions: -25 to +85 ºC, 20 - 75 % RH Maximum load: 200 W (max.) / 100 W (switchable) NOTES Switch off the power switch of the amplifier before connecting it and do not switch the amplifier on again until you have made all the necessary connections and checked them Use suitable loudspeaker cables for connecting only,make sure to introduce neatly the litz wires into loudspeaker terminals to exclude short circuits Connect the loudspeaker terminals SPEAKER with loudspeakers Connect the loudspeaker terminals AMPLIFIER to the loudspeaker outputs of the amplifier PACKAGE CONTENTS Main unit x1 User Manual x1
Double Brush Wallplate | steel
AV:LINK
£7.29
Brush wallplate double - steel , BRUSH WALLPLATES DOUBLE , Standard outlet wallplates with brush filled aperture to allow cable feed-through for AV equipment. , Large aperture to allow connectors to be fed through Twin brushes to cover gaps in aperture , Aperture size - 100 x 50mm Dimensions - 146 x 86 x 4mm Weight - 60g
QED SS30 3 way speaker switch M
IDC Klaassen Int. Distrubution & Consulting OHG
£74.00
Three pairs of speakers via one outletThe QED SS30 allows for three pairs of speakers to be switched through one speaker pair outlet. Series/parallel switching ensures safe amplifier loading (when using three pairs of 8 ohm speakers, the load will be 4 ohms - check your amplifier to see if it will drive this impedance). With a power rating of up to 150 watts, large cable entry points and silver-plated switch contacts, the QED SS30 avoids the sonic compromises of cheaper switching units.
2 Way Loudspeaker Selector
AVSL
£11.94
Allows two pairs of loudspeakers to be connected to the output of a stereo amplifierEach pair can be selected individually or both togetherDesigned for 8 ohms impedance speakersSpring clip terminal connectionsAvail
Electrovision 4-Way Stereo Speaker Selector Switch
Electrovision
£22.23
This unit allows up to 4 pairs of speakers to be connected to a HiFi system, with its easy to use spring clip terminals. The switch on the front allows for easy control of either sets of speakers, or both. So you just run four sets of speakers into this box, then one set of cables from box to the speakers terminals on the amplifier (or hi-fi). Then you can switch between all sets of speakers, or all at once. Great for having music in more than one room.
AV Link WE1722 Adaptor F socket to coax TV plug
Universal Markets Ltd
£1.33
WE1722 Adaptor F socket to coax TV plug , F TYPE ADAPTOR , F socket to coax TV plug. , ,