Axminster Engineer Series

Axminster Model Engineer Series C0 Micro Lathe
Axminster Model Engineer Series
£359.95
A high quality, miniature metalworking lathe, constructed to a very high standard around a cast iron, hardened and ground bed. The spindle is powered by a 150W motor through a variable speed drive giving spindle speeds of 100-3,850rpm. With a swing of 110mm and 125mm between centres, this is an ideal machine for making small parts for models and integrating metal parts into woodturning projects etc. Weighing only 13kg, this is a very portable but capable machine. It is fitted with a 3-jaw self-centring chuck with reversible jaws, single tool post taking 8mm tooling, splash guard and interlocked chuck guard for safety. The spindle thread is 14 x 1mm and has a 10mm bore.
Axminster Model Engineer Series SX2 Mini Mill
Axminster Model Engineer Series
£799.96
A fine, high precision mill/drilling machine, an ideal companion to the SC2 lathe. Constructed in cast iron with a finely ground table with 12mm T slots, and ground and hardened slideways. The milling head and column can tilt to 45° left or right for compound angle milling or drilling. The ample power comes from a high torque, brushless 500W DC motor with variable speed, giving a spindle speed range of 100 - 2,500rpm. It also has a notably quiet running spindle belt drive system. The spindle has an internal 3MT bore to enable a large range of tooling to be used. The headstock quill has a fine downfeed control feature for milling and a rack and pinion downfeed system for drilling. A gas support strut holds the headstock in position. The table leadscrews are covered for protection against swarf and debris. There is a connection port on the headstock for the optional digital spindle speed display panel. Supplied with a drill chuck and arbor, safety guard, tools and three drawbars 10mm, 12mm, 3/8 Whitworth. This is a superb, small mill for the model engineer or school use.
Axminster Model Engineer Series C1 Micro Lathe
Axminster Model Engineer Series
£549.96
Small in size yet packed full of features, this miniature lathe could provide the perfect introduction to those wanting to have a first try at metal turning. The machine is small enough to fit into the corner of a workshop and is light enough to be truly portable. The construction is predominantly of cast iron and steel. The capacities, 140mm diameter and 250mm between centres, are surprisingly large for a machine of this overall size. Features of note are the electric variable speed control, manual or powered lead screw feed and an extensive range of accessories. The lathe comes supplied with 80mm diameter 3-jaw self-centring chuck, tailstock centre and service tools. Maximum tool shank size is 8mm. This micro lathe is the ideal entry level machine that will not burn a huge hole in your pocket
Axminster Model Engineer Series MCB115SHD Swivel Head Metal Cutting Bandsaw
Axminster Model Engineer Series
£429.96
A versatile, medium sized metal cutting bandsaw with several notable features. This machine will be ideal for the smaller fabrication jobs, especially those which require materials accurately cut at various angles. Made predominately of cast iron, this machine features a swivelling head, which is a much more accurate and convenient method of cutting bevels or angles than the more usual pivoting vice jaws. Cutting pressure is set on the hydraulic support ram, whilst 3 belt speeds allow the correct speed for the job to be selected. The material vice has a large capacity, and features a quick release mechanism to allow fast setting. The floor stand has a pair of wheels at the rear, which allows easy mobility when you slide out the handle, but also offers a stable platform in use. Well finished and reliable, this has proved to be a very good small bandsaw.
Axminster Engineer Series BS150 x 2000 Belt Linisher 415V
Axminster Engineer Series
£689.94
Axminster Engineer Series BS150 x 2000 Belt Linisher 415V
Axminster Engineer Series Micron Filter for CT-502H
Axminster Engineer Series
£52.50
Axminster Engineer Series Micron filter for CT-502H
Axminster Engineer Series Powerfeed X2.7, SX2.7 230V
Axminster Engineer Series
£299.95
Axminster Engineer Series Powerfeed X2.7, SX2.7 230V
Axminster Engineer Series SC8 Quick Change Tool Post
Axminster Engineer Series
£103.93
A quick change tool post with 3 tool holders for the SC8 lathe. Easy to use and adjusts to the correct tool tip height without messing around with shims or spacers under the tool. Takes tooling up to 16mm shank. Replaces the standard tool post supplied with the machine.
Axminster Engineer Series SC4 Milling Attachment
Axminster Engineer Series
£379.96
A small milling attachment for the SC4 lathe, based around the rear column, headstock and motor drive unit from the X1 micro mill. Converts this lathe into a very versatile machining centre.
Axminster Engineer Series Soft Jaw Set for 125mm Chucks
Axminster Engineer Series
£21.60
Axminster Engineer Series Soft Jaw Set for 125mm Chucks
Axminster Engineer Series Carbon Filter for CT-502H
Axminster Engineer Series
£42.49
Axminster Engineer Series Carbon filter for CT-502H
Axminster Engineer Series SC6/SC8 Milling Attachment
Axminster Engineer Series
£719.95
This is a milling attachment for the C6/SC6 or C8/SC8 lathes, based upon the popular SX2 milling machine. Easily mounted and with its own electrical controls, this option adds an additional dimension to these lathes, turning them into a small, multi-purpose machining centre. Please note: all C6/SC6 lathes previously sold by Axminster have the mounting plate for this attachment on the rear of the bed plus the required electrical connection to power the mill. Complete with a small milling table, used only on the C6/SC6 or C8/SC8 lathes.
Axminster Engineer Series Soft Jaw Set for 100mm Chucks
Axminster Engineer Series
£19.46
Axminster Engineer Series Soft Jaw set for 100mm Chucks
Axminster Engineer Series Powerfeed SX3 230V
Axminster Engineer Series
£399.96
Axminster Engineer Series Powerfeed SX3 230V
Axminster Engineer Series SC8 ER32 Collet Holder
Axminster Engineer Series
£144.96
Collets are used where the very highest accuracy is required. Each collet has a 1mm compression range and so can be used on metric or imperial dimensioned materials, saving costs. Easy to use and ideal for repeat turning operations, these will make the accurate machining of small parts a doddle. This ER32 collet holder is supplied with mounting bolts, please choose your collets from our extensive range.
Axminster Engineer Series M-360 Bench Pillar Drill
Axminster Engineer Series
£599.95
The M-360 is a very precise, small pillar drill best suited for small production batch work. It uses the ER16 collet system, which in turn uses collets with a closure of 1mm, so for example a 6mm collet will close down to 5mm. Collets have long been recognised as the most accurate tool holding system, so perfect concentricity is assured. The drill shank capacity is 0.5-6mm. The machine, although compact in size, is heavily built in cast iron. The column features a rack and pinion system to control the height of the headstock. The headstock itself has an exceptionally deep quill housing, ensuring accuracy even with the quill fully extended. There is a threaded depth stop, which can be locked to ensure a constant drilling depth. A 3-speed belt drive system is fitted, driven by a smooth running induction motor. The base has a work table surface machined into it with 14mm T-slots for work clamping. The drill is fitted with an interlocked chuck guard, LED work light and locking "E" stop switch. Please note, collets are not supplied; please choose from our selection.