Philips 929001173761 Hue Smart Wireless Dimmer Switch (Installation-Free, Exclusive for Philips Hue Lights) - White
Philips
£16.99
Enrich your system with the Philips Hue dimmer switch and enjoy smooth wireless dimming. The switch works as a normal wall switch and dimmer. Place it anywhere you want, using screws or the adhesive tape on the back plate of the switch. Weight & dimensions -Weight: 37 g Operational conditions -Operating temperature (T-T): -10 - 45 °C Technical details -Batteries included: Y -Battery type: 1 x CR2450 Packaging data -Quantity: 1 Design -Colour of product: White
BG Electrical NBS83P 400W Triple 2-Way Metal Brushed Steel Push On/ Off Dimmer Switch
Nexus (Jiaxing)
£20.53
BG Electrical NBS83P Nexus Metal Brushed Steel 3 Gang 2 Way Push On/Off Dimmer Switch 400W
BG Electrical NBS81P 400W Single 2-Way Metal Brushed Steel Push On/ Off Dimmer Switch
Nexus (Jiaxing)
£10.48
BG Electrical NBS81P Nexus Metal Brushed Steel 1 Gang 2 Way Push On/Off Dimmer Switch 400W
AET CPC1GDIM4 Polished Chrome Classical 400W-10 Amp Single 1 Gang 2 Way 400W Light Dimmer Switch
AET
£6.80
The contemporary classical switched socket has a polished silver mirror finish. Full range available including light switches, light dimmers, plug sockets, cooker controls, fused spurs and many more!
Masterplug Nexus 882P 2-Way Moulded Push On/ Off Dimmer Switch 400 W 2-Gang
Nexus (Jiaxing)
£5.61
Slimline profile plate 30 year guarantee Designed to fit 16mm flush steel boxes Manufactured to BS 60669 Supplied with spacer plates
WALLPAD 3 Colors Glass Panel Touch Sensor Remote Control Wall Switch, (5-580W Remote Control LED Dimmer Switch, White)
Wallpad Electric
£21.99
Only compatible for dimmable lamps. Only TURN ON the power AFTER the glass panel is installedA free battery will be pre-installed if the order is dispatched by AmazonStandard UK size2 years guarantee, easy wiring just same as traditional wall switches. Suitable for bulbs of 5-580W only including LED lamps. NO need any adaptor to avoid flashing problem. With red and green LED back indicator light when the lamp is off and on.NOTE: Please turn the power on after the panel mounted, or the switching won't be so sensitive!!Due to the international shipping rule, battery is not included if it's disptached by Wallpad Electric Please use 1 piece of 12V 27A. Flickering issue: With very small chance, a Dimmable LED bulbs's dimming range is smaller than the switch dimmer's, the lamp might flicker when the light is at the brightest or darkest. Please change a lamp to solve this problem.The design of the remote for dimmer switch is special and will lead to 1-2 seconds delay when using. It is normal. Please note this before purchase.
Philips Hue Wireless Lighting Dimmer Switch - White
Philips
£18.50
The fastest way to dim your Hue lightsFrom anywhere Dim your Philips Hue lights Connect the Philips Hue Dimmer switch to your Philips Hue Bridge, configure it via the app and control your favourite Philips Hue light scene without using your smart device. You can turn your lights on/off, or smoothly dim your favourite light scene to the right brightness. Place anywhere you need a light switch The battery-powered Hue Dimmer switch can be used as a standard wall switch. You can place it anywhere you want, using screws or the adhesive tape on the back plate of the switch. Installation is fast and simple, with no wires and no hassle. Wireless switch and remote control in one The switch is magnetic and can be removed from the back plate. This means you can also use the Philips Hue Dimmer switch as a remote control for your light with an indoor range of up to 12 metres. Battery-powered for easy placement in your home The Philips Hue Dimmer switch is battery-powered, so setting up is quick and easy. Connect up to 50 Philips Hue lights You can connect up to 50 lights and 10 accessories to the Philips Hue Bridge (not included). Simply begin with any of the available starter kits or a separate bridge and start adding Philips Hue products. You can then control your lights at the swipe of a finger with the intuitive Philips Hue app. Philips Hue is based on ZigBee, a low-power, safe and reliable technology to control your lights. New features and improvements are continuously added to the system. Updates to both software and firmware are made wirelessly and seamlessly directly to your Philips Hue products.
BG Electrical NPC82P Nexus Metal Polished Chrome 2 Gang 2 Way Push On/Off Dimmer Switch 400W
Nexus Industries
£14.99
BG Electrical NPC82P Nexus Metal Polished Chrome 2 Gang 2 Way Push On/Off Dimmer Switch 400W
WALLPAD 3 Colors Glass Panel Touch Sensor Remote Control Wall Switch, (5-580W Remote Control LED Dimmer Switch, White)
Wallpad Electric
£21.99
Only compatible for dimmable lamps. Only TURN ON the power AFTER the glass panel is installedA free battery will be pre-installed if the order is dispatched by AmazonStandard UK size2 years guarantee, easy wiring just same as traditional wall switches. Suitable for bulbs of 5-580W only including LED lamps. NO need any adaptor to avoid flashing problem. With red and green LED back indicator light when the lamp is off and on.NOTE: Please turn the power on after the panel mounted, or the switching won't be so sensitive!!Due to the international shipping rule, battery is not included if it's disptached by Wallpad Electric Please use 1 piece of 12V 27A. Flickering issue: With very small chance, a Dimmable LED bulbs's dimming range is smaller than the switch dimmer's, the lamp might flicker when the light is at the brightest or darkest. Please change a lamp to solve this problem.The design of the remote for dimmer switch is special and will lead to 1-2 seconds delay when using. It is normal. Please note this before purchase.
Varilight JQP401W V-Pro 1 Gang 2-Way LED Trailing Edge Dimmer Switch, White
LumiLife
£13.81
Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube using this link:- https://www.youtube.com/watch?v=Id1E2hQpX-w . V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Please adhere to maximum rating listed on the Varilight datasheets on their website or copy and paste the link for the V-Pro instruction leaflet: - http://www.varilight.co.uk/leaflets/VARILIGHT%20V-Pro%20Dimmer%20Instructions%20776.pdf .These dimmers do not work with lighting panels (LED or CFL) and are not suitable for wire-wound "toroidal" transformers. Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes.
Varilight JQP252W V-Pro White 2 Gang LED Trailing Edge Dimmer Switch 1 or 2 Way
LumiLife
£23.50
2 x 250w Trailing Push On and Off 2-Way White Varilight Dimmer Switch
Plugin Dimmer Switch | White
mercury
£5.60
Dimmer switch , DMR-1 DIMMER SWITCH , Adjustable light intensity for use in a standard wall socket. , , Power supply - 230Vac, 50Hz Power max. - 300W Dimensions - 53 x 63 x 98mm Weight - 110gram Note: Most energy saving bulbs are not fully compatible with dimmer switch circuits and fitting one will cause the bulb to flicker continuously.
Varilight 1-Gang 2-Way Push-On/Off Rotary LED Dimmer Light Switch in Matt Chrome
LumiLife
£14.00
Standard V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change the driving modes and adjust the minimum brightness with pushes of the dimmer control and using signals from the lamps. You can view the programming instructions on the dimmer leaflet or, alternatively, you can view Varilight video on YouTube using this link:- https://www.youtube.com/watch?v=Id1E2hQpX-w . V-Pro series dimmers are designed for use with LEDs and they are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting. The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot. Please adhere to maximum rating listed on the Varilight datasheets on their website or copy and paste the link for the V-Pro instruction leaflet: - http://www.varilight.co.uk/leaflets/VARILIGHT%20V-Pro%20Dimmer%20Instructions%20776.pdf .These dimmers do not work with lighting panels (LED or CFL) and are not suitable for wire-wound "toroidal" transformers. Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes.
Konesky WiFi Smart Switch 1 Gang Smart Light Touch Control Stepless Dimmer Switch 400W Wireless Remote Control Compatible with Alexa Google Assistant IFTTT withTiming Function(Neutral Line Need)
Konesky
£18.99
Note:1. When installing, this Wi-Fi touch switch need to connect to a Neutral line.2. This dimmer only supports to adjust the light brightness, it can not change the light color.3. The light connect with this dimmer must support diming function.4. For ordinary LED light, only timing on/off function, can't adjust light brightness through the wifi and button. 5. Before purchase, please check whether the dimmer bottom size fits in your installation box.The switch originally needed a neutral line and a neutral line to install and use, but for some old houses, a third party may be needed. That is need Neutral wire, Line and Load are required. If you are unsure, please check how many wires you got in your wall box or consult a qualified electrician before purchasing. This wall switch will not work if there are only 2 wires in your wall box.Specification:Type: 1 Gang Touch Wi-Fi DimmerMaterial: Flame-resistant ABS, toughened glassItem Color: WhitePlug: UK standardRated Voltage: AC 100V-240V, 50/60HzMax. Load: 400W / gang (Resistive load)Max. Working Current: 2AStandby Consumption: 0.1mAWi-Fi: 2.4GHz, IEEE 802.11 b/g/nWireless Range (the distance between wifi router and dimmer): andlt;30m / 98ft (lndoor)App: Smart LifeOS Supported: Android and iOSApplication: LED, Incandescent lamp, halogen lampPower Supply: Neutral and Live wireWork Environment.: 0~80°C, 10~93%Certification: CE, RoHS, FCCInstallment Pitch of Holes: 60mm (EU/UK standard)Size: 8.6*8.6*3.7cm / 3.4*3.4*1.5" (L*W*H)Net Weight: 0.145kg / 4.9ozPackage Including1*Wi-Fi touch light switch1*English andamp; German user manual2*Screw1*Package box
Smart Dimmer Switch, Orbeor WiFi Touch Wall Light Dimmer Switch Works with Alexa/Google Home/IFTTT, 1 Gang App Remote Control, Timming Function, 2A 400W, White(Neutral Wire Required)
Orbeor
£18.99
Dim your Led lights with Orbeor Smart dimmer switch, Voice control your lights anywhere in your house Warm Tips: 1.Please make sure that there is the neutral wire in your household wire.If you can not confirm it, please contact the electricial to check it. 2.Works with 2.4GHz only. If your router is mixed 5g and 2.4g. Please the 2.4g to connect. 3.The light connect with this dimmer switch must support diming function. This dimmer switch only supports to adjust the light brightness, it can not change the light color. 4. Depth: 27mm, Width:59.5mm 5. It does not support normal Led light, energy saving lamp, gear dimming Led light; The max power can not over 150W if you connect the lights in series/ in parallel Compatible with Amazon Alexa/Google Home/IFTTT Voice control through Alexa/Google Assitant to turn on/off the light and adjust the brightness. Android iOS APP Remote Control Turn on/off lights or adjust stepless brightness at anytime and anywhere via Smart Life APP. One to ALL One switch can be controlled/shared by multi-phones and one phone can control several switch. Wet Hand free Touch switch panel sensor, you can operate the panel even your hands are wet, after washing hands or taking a shower, you can directly operate the touching panel with your wet hands, which is safer but more convenient. Dimmer Switch for Led Lights(Dimmable) Widly used with LED, Incandescent lamp, Halogen lamp, Iodine-tungsten lamp, Resistive buck Led lamp, NiteCore extreme/stepless dimming Led lamp Specification: Voltage: AC 100V-240V Max. Load: 400W/gang Max. Current: 2A Wi-Fi: 2.4GHz only Wroking Range:30mYoutube Installation Link:1.How to connect with your house wire:https://youtu.be/yTg-ToBua8k2.How to connect with wifi:https://youtu.be/7eGyh2zG2U4
BG Electrical NPC82P Nexus Metal Polished Chrome 2 Gang 2 Way Push On/Off Dimmer Switch 400W
Nexus Industries
£14.99
BG Electrical NPC82P Nexus Metal Polished Chrome 2 Gang 2 Way Push On/Off Dimmer Switch 400W
Samotech® SM200 Light Switch Cover for Philips Hue Dimmer - Adapter - Converter
Samotech Plus
£7.99
This adapter has been designed to solve the common problem in many smart homes. Most smart bulbs will simply stop working if the main light switch is off as the smart light bulbs require power to operate. This adapter covers the main switch and prevents an accidental switch off while keeping your Philips Hue setup fully functional. The installation is very easy and requires just a screwdriver. MATERIAL: ABS plastic COMPATIBILITY: Philips Hue Wireless Dimmer Standard UK light switches up to 92x92x9mm switch plate size, 60mm distance between screw holes and up to 4mm rocker height. Please refer to the pictures in the description for compatibility details to avoid any disappointment with your purchase. INSTRUCTIONS: 1. Unscrew the two retaining screws on the light switch 2. Attach the adapter on top of the light switch and screw both back into the wall using supplied screws 3. Remove the insert from the Philips Hue flush mount and snap fit the mount to the adapter OPTIONAL: 📝 Four corners inside the adapter are designed to help lining up the most standard UK 86x86mm light switch inside the adapter. If your light switch is bigger (e.g. 87x87mm, 92x92mm), the corners must be removed using a flat screwdriver. 📝 In a rare situation where attaching the mount interferes with the rocker, please turn the light switch upside down. This will change the rocker's ON/OFF position and prevent touching the magnets on Philips Hue Dimmer mount. The issue may only exist if the light switch or its rocker is bigger than the suggested compatible size (please see Picture 2 for compatible dimensions). PACKAGE CONTAINS: Samotech SM200 UK Light Switch Adapter Two electrical screws 🔴Philips Hue Smart Wireless Dimmer Switch is displayed for reference purposes only!