Ardex Feather Finish Rapid Drying Patching & Smoothing Compound 11Kg
Ardex
£50.00
ARDEX FEATHER FINISH is an ultra rapid drying patching and smoothing compound, which provides a high bond strength to concrete, plywood, sand/cement screeds, existing smoothing compounds and ceramic tiles, without the need to prime. Designed for use in commercial and domestic locations, prior to the installation of resilient floorcoverings such as luxury vinyl tiles or sheet vinyl etc, ARDEX FEATHER FINISH is ideal for the rapid skimming of plywood, patching, filling and feather finishing daywork joints, ridges, gouges, depressions, and uneven trowel marks, etc., in the subfloor, as well as smoothing joints between staggered plywood sheets.
Ardex - Feather Finish (5kg)
Ardex
£35.00
StyccoBond F41 is a solvent free acrylic polymer emulsion adhesive that contains a rust inhibitor. It is designed to provide a permanently tacky film which prevents 'looselay' carpet tiles from moving under normal traffic but enables them to be lifted and replaced easily when required. It is non-flammable, is protected against biodegradation, is suitable for use over normal underfloor heating installations, is resistant to plasticiser migration and will withstand normal wet cleaning techniques. STYCCOBOND F41 can be used for securing a wide range of dimensionally stable "lay flat" carpet tiles backed with bitumen/felt, non-woven fabric, PVC and other polymer backings. See the Recommended Adhesives Guide for details of specific floorcoverings. STYCCOBOND F41 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard. STYCCOBOND F41 can also be applied to non-absorbent subfloors such as STOPGAP waterproof surface membranes, STOPGAP ISOlATOR, Raised Access Flooring Panels, Steel, Terrazzo, Granolithic, linoleum and Vinyl floorcoverings. Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.
Ardex Feather Finish (11kg)
Ardex
£74.09
StyccoBond F41 is a solvent free acrylic polymer emulsion adhesive that contains a rust inhibitor. It is designed to provide a permanently tacky film which prevents 'looselay' carpet tiles from moving under normal traffic but enables them to be lifted and replaced easily when required. It is non-flammable, is protected against biodegradation, is suitable for use over normal underfloor heating installations, is resistant to plasticiser migration and will withstand normal wet cleaning techniques. STYCCOBOND F41 can be used for securing a wide range of dimensionally stable "lay flat" carpet tiles backed with bitumen/felt, non-woven fabric, PVC and other polymer backings. See the Recommended Adhesives Guide for details of specific floorcoverings. STYCCOBOND F41 can be applied to STOPGAP smoothing underlayments, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard. STYCCOBOND F41 can also be applied to non-absorbent subfloors such as STOPGAP waterproof surface membranes, STOPGAP ISOlATOR, Raised Access Flooring Panels, Steel, Terrazzo, Granolithic, linoleum and Vinyl floorcoverings. Sound flooring grade asphalt must be skimmed with a minimum of 3mm of the appropriate STOPGAP smoothing underlayment.
ARDEX A45 ARDURAPID 11kg
Ardex
£24.00
Rapid Drying Internal Repair Mortar ARDEX ARDURAPID A 45 is a rapid drying and hardening, slump free mortar for internal repairs. Receives finishes after 90 minutes regardless of thickness Slump free - ideal for vertical and horizontal repairs Ideal for the rapid repair of internal concrete, screeds, renders and concrete steps Other applications include forming ramps, falls and coves, patching around fittings/pipework, and filling cracks and gaps Unit Size Available: 11kg bags Coverage: Approximately 7m2 at 1mm thick per 11kg unit