Ardex grout grey

Ardex G6 Flex1 6 Flex Silver Grey Grout 5kg
ARDEX GmbH
£19.16
ARDEXG6 flex1 - 6 FLEX - GroutCartridge Flex cement groutArdex g 6 Flex 1 - 6 has according to the Erhärtung of water - and dirt repellent properties, making it cheap in the optical effect, texture and value of the surface. The high formability and strong edge hold use a voltage of catabolism during thermal surfaces and areas use much for the safety of pads.Concrete Cement This Byron grout with Feinstkörnigen no crystals Füllstoffen technology-and and special additives for excellent fine joint surfaces with very strong, with a build quality with long washing time. When you mix with water to create a Geschmeidigpastöser and mortar can be fitted easily process, do not Aufbrennt, a high fill power has and firmly and rissefrei in the joints.The surface of the line is very fine and smooth. Product Features:For joints from ceramic, glass tiles, Feuchteunempfindlichen Natural and concrete stone tiles, mosaic glass mosaic, porcelain, ceramicFor joint widths from 1 - 6 mmFlexibleWater and dirt repellentVery fine and smooth tile surfaceStrong edge holdHigh strengthQuartz freeWith Vorbeugendem protection against mould fungusSuitable for floor and wall heating
'Ardex G8S Flex Grout 1 6 mm 5kg
ARDEX
£12.59
Ardex G8S Flex 1 - 6 FLEX Quick cement base for wall tile grout joint widths up to a maximum of 6 mm for both indoor and outdoor use Quick Erhärtend and resilient, flexible, water- and dirt-repellent, fine joint surface, especially good edge grip, the highest levels of durability. With Vorbeugendem protection against mould. Suitable for floor and wall mounted Heat Mat installation. Area of use for joints of: •, tiles made from porcelain stoneware, stoneware and earthenware •, glass tiles •; Natural and concrete stone plates (moisture-resistant) •; Mosaic made of glass, porcelain and ceramic material requirements: For Joint Width 3 mm, Joint Depth of 5 mm for tiles or medium mosaic of 60 x 60 cm approx. 0.10 kg/m² of 60 x 30 cm approx. 0.15 KG/M² of 30 x 30 cm approx. 0.20 kg/m² of 15 x 15 cm approx. 0.35 kg/m² of 10 x 10 cm approx. 0.50 kg/m² of 5 x 5 cm approx. 1 kg/m² the additional loss through excess material on the tiles, it is depending on the surface of which properties and working 0.05 - 0.1 kg/m² processing time (+ 20 °C/68 °F): 30 min) and A4-80 Stainless Steel Screw Material. Begehbarkeit (+ 20 °C): After approx. 90 min.
Ardex MG Natural Stone Grout 5kg
ARDEX
£23.60
Ardex mg Natural Stone Sanding Product Description •, with Ardu Rapid® effect •;; by Feinsteinzeugfliesen • To prevent discolouration • Edge - with increased abrasion resistance and reduced water absorption •; Filling deep joints in one •; for joint widths up to 8 mm • - No Beifallen & #X2022 - No while racing •, easy to washable •, fast setting •, quick load •, rissefrei use • - discoloration free any natural stone and natural stone tiles made of marble, sectional, Solnhoren limestone,, marble and granite, quartzite, including indoor on wall and floor surfaces. Joints of Feinsteinzeugfliesen. •; Fill of deep joints in one process. • Suitable for joint widths up to 8 mm •, for indoor use. Material required: For Joint Width 3 mm, Joint Depth of 5 mm for tiles and slabs of 60 x 60 cm (L x W x H): approx. 0.10 kg/m2 30 x 60 cm (L x W x H): approx. 0.15 kg/m2 30 x 30 cm (L x W x H): approx. 0.20 kg/m2 15 x 30 cm (L x W x H): approx. 0.30 kg/m2 20 x 30 cm (L x W x H): approx. 0.25 kg/m2 the extra loss due to excess material on the plates, it is depending on the surface of which properties and working 0.05 - 0.1 kg/m² processing time (+ 20 °C/68 °F): 30 min) and A4-80 Stainless Steel Screw Material. Begehbarkeit (+ 20 °C): After approx. 90 min.
'Ardex GK Grout Load Joint 25 kg, Colour: Grey Durable Joint
ARDEX
£36.50
Ardex GK stress grout Product Description •; Cement Base • For the grouting of tiles and slabs •; in workshops, washers, swimming pool, •; drinking water containers, on industrial surfaces •; stair enclosures, a hallways, balconies •; and terraces, and• For Joint widths from 4 mm • - Holds by Tausalz, pressure washer, •, high temperature, mineral oils and general cleaning products •; High mechanical load capacity and abrasion resistance •; in just 90 minutes accessible •; rissefrei For use indoors and outdoors. Floors and Walls. For joints from - tiles made of stoneware and porcelain stoneware - Concrete Stone plates - Natural Stone Surfaces (moisture-resistant) - Splitting and clinker brick panels - Exterior Straps and glass stones in workshops, washers, swimming pools, water tanks arbour, on commercial surfaces, stairs, hallways, balconies, and patios. Material Requirements: Joint Width 10 mm, Joint Depth 5 mm for tiles of 60 x 60 cm approx. 0.30 kg/m² of 30 x 60 cm approx. 0.50 kg/m² of 30 x 30 cm approx. 0.65 kg/m² of 15 x 15 cm approx. 1.3 kg/m2 of 10 x 10 cm approx. 2.00 kg/m2 the additional loss through excess material on the tiles are according to the surface of which properties and working 0.05 - 0.1 kg/m². Operating Time (+ 5 °C to 20 °C): approx. 30 min) and A4-80 Stainless Steel Screw Material. Begehbarkeit (+ 20 °C): After approx. 90 min.
ARDEX G8S Flex Grout 1-6 - 12.5 kg Grey - Quick Hardening Flex Grout for Grout Widths from 1 to 6 mm, on Wall and Floor, Indoors and Outdoors.
ARDEX GmbH
£30.22
Ardex G8S Flex Grout 1-6 Fast hardening flex grout For joint widths of 1 - 6 mm, on wall and floor, indoors and outdoors. With ARDEX G8S FLEX 1-6 you can create joints with a particularly fine surface and great strength. ARDEX G8S FLEX 1-6 has water- and dirt-repellent properties after hardening, which have a beneficial effect on the optical effect, texture and value preservation of the coverings. The high deformability and good edge adhesion cause a voltage reduction in thermally stressed surfaces and contribute significantly to the safety of the coverings. As well as the preventive protection against the formation of mould fungi. Despite fast hardening, ARDEX G8S FLEX 1-6 can be easily processed, does not burn and has a high filling power. ARDEX G8S FLEX 1-6 complies with the requirements of CG2 WA according to EN 13888 and is very low-emission - EC 1 R PLUS - according to GEV EMICODE. Product Specification: Cement bonded flex grout For joints of tiles made of porcelain stoneware, stoneware and stoneware, glass tiles, moisture-resistant natural and concrete stone slabs, mosaic made of glass, porcelain and ceramic. Quickly hardening and resilient Fine joint surface Good edge adhesion High strength
Kerakoll Premium Wall & Floor Grout - 5kg (Light Grey)
kerakoll
£19.95
Kerakoll Premium Wall & Floor Grout 5kg. A premium wall and floor grout suitable for most projects. * Internal & External Use * Superb Colour Fastness * Suitable for Under Floor Heating * Flexible * Easy To clean * Mould Resistant * Water Repellent
Ardex St silicone sealant DOVE GREY
Ardex
£12.38
Ardex St silicone sealant is suitable for bathrooms and kitchens. Part of the co-ordinating colour series for Ardex FL and FS grouts
'Ardex G9S Flex 2-15 mm Grout 5 Kg, Colour: Grey Fast, especially for Balconies and Patios
ARDEX
£11.71
Ardex G9s Flex 2-15 grout cartridge Flex Quick Product Description •, cement grout • For the joints of tiles made from porcelain stoneware, •, stoneware and stoneware Feuchteunempfindlichen •; Natural and concrete stone plates, •; Mosaic Glass Mosaic, & #X2022, porcelain and ceramic •, for joint widths of 2 - 15 mm • Water resistant •; Hochver shape bar •, quick Erhärtend and resilient •, flexible •, good edge grip rating • Suitable for floor and wall heater for use in indoor and outdoor use. Floors and Walls. For joints from - tiles made from porcelain stoneware, stoneware and earthenware insensitive - Natural and concrete stone plates (moisture) - Mosaic made of porcelain and ceramic - Klin core, split slabs and facade straps - Glass Building Block Walls specially for stoneware, balconies and patios. For joint widths from 2 to 15 mm can: with joint width 6 mm, Joint Depth 5 mm for fliesen. of 60 x 60 cm approx. 0.20 kg/m² of 30 x 60 cm approx. 0.30 kg/m² of 30 x 30 cm approx. 0.40 kg/m² of 15 X 15 cm approx. 0.60 kg/m² of 10 x 10 cm approx. 0.90 kg/m² of 5 x 5 cm approx. 1.8 kg/m² the additional loss through excess material on the tiles, it is depending on the surface of which properties and working 0.05 - 0.1 kg/m². Processing time (+ 20 °C): about 30 minutes. Begehbarkeit (+ 20 °C): After approx. 90 min.
'Ardex G9S Flex 2-15 mm Grout 5 Kg, Colour: Silver Grey Fast, especially for Balconies and Patios
ARDEX
£11.71
Ardex G9s Flex 2-15 grout cartridge Flex Quick Product Description •, cement grout • For the joints of tiles made from porcelain stoneware, •, stoneware and stoneware Feuchteunempfindlichen •; Natural and concrete stone plates, •; Mosaic Glass Mosaic, & #X2022, porcelain and ceramic •, for joint widths of 2 - 15 mm • Water resistant •; Hochver shape bar •, quick Erhärtend and resilient •, flexible •, good edge grip rating • Suitable for floor and wall heater for use in indoor and outdoor use. Floors and Walls. For joints from - tiles made from porcelain stoneware, stoneware and earthenware insensitive - Natural and concrete stone plates (moisture) - Mosaic made of porcelain and ceramic - Klin core, split slabs and facade straps - Glass Building Block Walls specially for stoneware, balconies and patios. For joint widths from 2 to 15 mm can: with joint width 6 mm, Joint Depth 5 mm for fliesen. of 60 x 60 cm approx. 0.20 kg/m² of 30 x 60 cm approx. 0.30 kg/m² of 30 x 30 cm approx. 0.40 kg/m² of 15 X 15 cm approx. 0.60 kg/m² of 10 x 10 cm approx. 0.90 kg/m² of 5 x 5 cm approx. 1.8 kg/m² the additional loss through excess material on the tiles, it is depending on the surface of which properties and working 0.05 - 0.1 kg/m². Processing time (+ 20 °C): about 30 minutes. Begehbarkeit (+ 20 °C): After approx. 90 min.
'Ardex G8S Flex Grout 1 6 mm 12.5 kg Colour
ARDEX
£24.74
Ardex G8S Flex 1 - 6 FLEX Quick cement base for wall tile grout joint widths up to a maximum of 6 mm for both indoor and outdoor use Quick Erhärtend and resilient, flexible, water- and dirt-repellent, fine joint surface, especially good edge grip, the highest levels of durability. With Vorbeugendem protection against mould. Suitable for floor and wall mounted Heat Mat installation. Area of use for joints of: •, tiles made from porcelain stoneware, stoneware and earthenware •, glass tiles •; Natural and concrete stone plates (moisture-resistant) •; Mosaic made of glass, porcelain and ceramic material requirements: For Joint Width 3 mm, Joint Depth of 5 mm for tiles or medium mosaic of 60 x 60 cm approx. 0.10 kg/m² of 60 x 30 cm approx. 0.15 KG/M² of 30 x 30 cm approx. 0.20 kg/m² of 15 x 15 cm approx. 0.35 kg/m² of 10 x 10 cm approx. 0.50 kg/m² of 5 x 5 cm approx. 1 kg/m² the additional loss through excess material on the tiles, it is depending on the surface of which properties and working 0.05 - 0.1 kg/m² processing time (+ 20 °C/68 °F): 30 min) and A4-80 Stainless Steel Screw Material. Begehbarkeit (+ 20 °C): After approx. 90 min.
'Ardex G9S Flex 2-15 mm Grout 5 Kg, Colour: Silver Grey Fast, especially for Balconies and Patios
ARDEX
£11.71
Ardex G9s Flex 2-15 grout cartridge Flex Quick Product Description •, cement grout • For the joints of tiles made from porcelain stoneware, •, stoneware and stoneware Feuchteunempfindlichen •; Natural and concrete stone plates, •; Mosaic Glass Mosaic, & #X2022, porcelain and ceramic •, for joint widths of 2 - 15 mm • Water resistant •; Hochver shape bar •, quick Erhärtend and resilient •, flexible •, good edge grip rating • Suitable for floor and wall heater for use in indoor and outdoor use. Floors and Walls. For joints from - tiles made from porcelain stoneware, stoneware and earthenware insensitive - Natural and concrete stone plates (moisture) - Mosaic made of porcelain and ceramic - Klin core, split slabs and facade straps - Glass Building Block Walls specially for stoneware, balconies and patios. For joint widths from 2 to 15 mm can: with joint width 6 mm, Joint Depth 5 mm for fliesen. of 60 x 60 cm approx. 0.20 kg/m² of 30 x 60 cm approx. 0.30 kg/m² of 30 x 30 cm approx. 0.40 kg/m² of 15 X 15 cm approx. 0.60 kg/m² of 10 x 10 cm approx. 0.90 kg/m² of 5 x 5 cm approx. 1.8 kg/m² the additional loss through excess material on the tiles, it is depending on the surface of which properties and working 0.05 - 0.1 kg/m². Processing time (+ 20 °C): about 30 minutes. Begehbarkeit (+ 20 °C): After approx. 90 min.
'Ardex G8S Flex Grout 1 6 mm 12.5 kg Colour
ARDEX
£24.74
Ardex G8S Flex 1 - 6 FLEX Quick cement base for wall tile grout joint widths up to a maximum of 6 mm for both indoor and outdoor use Quick Erhärtend and resilient, flexible, water- and dirt-repellent, fine joint surface, especially good edge grip, the highest levels of durability. With Vorbeugendem protection against mould. Suitable for floor and wall mounted Heat Mat installation. Area of use for joints of: •, tiles made from porcelain stoneware, stoneware and earthenware •, glass tiles •; Natural and concrete stone plates (moisture-resistant) •; Mosaic made of glass, porcelain and ceramic material requirements: For Joint Width 3 mm, Joint Depth of 5 mm for tiles or medium mosaic of 60 x 60 cm approx. 0.10 kg/m² of 60 x 30 cm approx. 0.15 KG/M² of 30 x 30 cm approx. 0.20 kg/m² of 15 x 15 cm approx. 0.35 kg/m² of 10 x 10 cm approx. 0.50 kg/m² of 5 x 5 cm approx. 1 kg/m² the additional loss through excess material on the tiles, it is depending on the surface of which properties and working 0.05 - 0.1 kg/m² processing time (+ 20 °C/68 °F): 30 min) and A4-80 Stainless Steel Screw Material. Begehbarkeit (+ 20 °C): After approx. 90 min.
'Ardex G8S Flex Grout 1 – 6 mm 12.5 kg, Colour: Silver Grey Erhärtend Fast and Reliable
ARDEX
£24.74
Ardex G8S Flex 1 - 6 FLEX Quick cement base for wall tile grout joint widths up to a maximum of 6 mm for both indoor and outdoor use Quick Erhärtend and resilient, flexible, water- and dirt-repellent, fine joint surface, especially good edge grip, the highest levels of durability. With Vorbeugendem protection against mould. Suitable for floor and wall mounted Heat Mat installation. Area of use for joints of: •, tiles made from porcelain stoneware, stoneware and earthenware •, glass tiles •; Natural and concrete stone plates (moisture-resistant) •; Mosaic made of glass, porcelain and ceramic material requirements: For Joint Width 3 mm, Joint Depth of 5 mm for tiles or medium mosaic of 60 x 60 cm approx. 0.10 kg/m² of 60 x 30 cm approx. 0.15 KG/M² of 30 x 30 cm approx. 0.20 kg/m² of 15 x 15 cm approx. 0.35 kg/m² of 10 x 10 cm approx. 0.50 kg/m² of 5 x 5 cm approx. 1 kg/m² the additional loss through excess material on the tiles, it is depending on the surface of which properties and working 0.05 - 0.1 kg/m² processing time (+ 20 °C/68 °F): 30 min) and A4-80 Stainless Steel Screw Material. Begehbarkeit (+ 20 °C): After approx. 90 min.
'Ardex G6 Flex Grout 1 – 6 mm 12.5 kg, Colour: Light Grey for Inside and Out, Long Work with
ARDEX
£23.60
Ardex G6 Flex 1-6 grout concrete base for joint widths from 1-6 mm for both indoor and outdoor use Flexible - Long processing time, water and dirt repellent, the highest levels of durability. Quartz free - very fine and smooth tile surface. Very good edge hold. With Vorbeugendem protection against mildew. Suitable for floor and wall mounted Heat Mat installation. Area of use for joints of: •; tiles made from ceramic • Glass •; Natural and concrete stone paving slabs (moisture-resistant) •; Mosaic made of glass, porcelain and ceramic materials required: For 5 mm Joint Width 3 mm, Joint Depth For tiles and medium mosaic of 60 x 60 cm approx. 0.10 kg/m² of 30 x 60 Cm approx. 0.15 kg M² of 30 x 30 cm approx. 0.20 kg/m² of 15 x 15 cm approx. 0.35 kg/m² of 10 x 10 cm approx. 0.45 kg/m² of 5 x 5 cm approx. 0.90 kg/m² the additional loss through excess material on the tiles, it is depending on the surface of which properties and working 0.05 - 0.1 kg/m². Processing time (+ 20 °C): approx. 1.5 hours. Begehbarkeit (+ 20 °C): After Approximately 4 hours.
Ardex G6 12.5 kg Flex Grout Silver Grey, 1 – 6 mm Long Work with
ARDEX
£23.60
Ardex G6 Flex 1-6 grout concrete base for joint widths from 1-6 mm for both indoor and outdoor use Flexible - Long processing time, water and dirt repellent, the highest levels of durability. Quartz free - very fine and smooth tile surface. Very good edge hold. With Vorbeugendem protection against mildew. Suitable for floor and wall mounted Heat Mat installation. Area of use for joints of: •; tiles made from ceramic • Glass •; Natural and concrete stone paving slabs (moisture-resistant) •; Mosaic made of glass, porcelain and ceramic materials required: For 5 mm Joint Width 3 mm, Joint Depth For tiles and medium mosaic of 60 x 60 cm approx. 0.10 kg/m² of 30 x 60 Cm approx. 0.15 kg M² of 30 x 30 cm approx. 0.20 kg/m² of 15 x 15 cm approx. 0.35 kg/m² of 10 x 10 cm approx. 0.45 kg/m² of 5 x 5 cm approx. 0.90 kg/m² the additional loss through excess material on the tiles, it is depending on the surface of which properties and working 0.05 - 0.1 kg/m². Processing time (+ 20 °C): approx. 1.5 hours. Begehbarkeit (+ 20 °C): After Approximately 4 hours.
Ardex G8S Flexible Grout 1 - 6 mm 5 kg, Colour Cement Grey, Fast Hardening and Resilient
ARDEX
£12.72
Ardex G8S Flex 1-6. flex grout, fast cement base. For joint widths of 1-6 mm. For interior and exterior. Fast hardening and resilient, flexible, water and dirt repellent, fine joint surface, particularly good flank adhesion, highest strength. With fungus preventative protection. Suitable for floor and wall mounted heating. Area of use for joints between: porcelain stoneware, stoneware and earthenware tiles, glass tiles, natural and concrete stone paving slabs (moisture-resistant), mosaic made of glass, porcelain and ceramic. Materials required: for joint width 3 mm, joint depth of 5 mm for tiles for example Central mosaic of 60 x 60 cm approximately 0.10 kg/m², of 60 x 30 cm approximately 0.15 kg/m², of 30 x 30 cm approximately 0.20 kg/m², of 15 x 15 cm approximately 0.35 kg/m², of 10 x 10 cm approximately 0.50 kg/m², of 5 x 5 cm approximately 1.00 kg/m². Additional loss through excess material on the tiles depends on the surface finish and working method, 0.05 - 0.1 kg/m² processing time (+ 20 °C): approximately 30 mins.. Time until it can be walked over (+ 20 °C): after approximately 90 min.
'Ardex G8S Flex Grout 1 – 6 mm 5 kg, Colour: Grey Erhärtend Quickly and reliable
ARDEX
£12.72
Ardex G8S Flex 1 - 6 FLEX Quick cement base for wall tile grout joint widths up to a maximum of 6 mm for both indoor and outdoor use Quick Erhärtend and resilient, flexible, water- and dirt-repellent, fine joint surface, especially good edge grip, the highest levels of durability. With Vorbeugendem protection against mould. Suitable for floor and wall mounted Heat Mat installation. Area of use for joints of: •, tiles made from porcelain stoneware, stoneware and earthenware •, glass tiles •; Natural and concrete stone plates (moisture-resistant) •; Mosaic made of glass, porcelain and ceramic material requirements: For Joint Width 3 mm, Joint Depth of 5 mm for tiles or medium mosaic of 60 x 60 cm approx. 0.10 kg/m² of 60 x 30 cm approx. 0.15 KG/M² of 30 x 30 cm approx. 0.20 kg/m² of 15 x 15 cm approx. 0.35 kg/m² of 10 x 10 cm approx. 0.50 kg/m² of 5 x 5 cm approx. 1 kg/m² the additional loss through excess material on the tiles, it is depending on the surface of which properties and working 0.05 - 0.1 kg/m² processing time (+ 20 °C/68 °F): 30 min) and A4-80 Stainless Steel Screw Material. Begehbarkeit (+ 20 °C): After approx. 90 min.
'Ardex G8S Flex Grout 1 – 6 mm 5 kg, Colour: Light Grey Erhärtend Quickly and reliable
ARDEX
£12.72
Ardex G8S Flex 1 - 6 FLEX Quick cement base for wall tile grout joint widths up to a maximum of 6 mm for both indoor and outdoor use Quick Erhärtend and resilient, flexible, water- and dirt-repellent, fine joint surface, especially good edge grip, the highest levels of durability. With Vorbeugendem protection against mould. Suitable for floor and wall mounted Heat Mat installation. Area of use for joints of: •, tiles made from porcelain stoneware, stoneware and earthenware •, glass tiles •; Natural and concrete stone plates (moisture-resistant) •; Mosaic made of glass, porcelain and ceramic material requirements: For Joint Width 3 mm, Joint Depth of 5 mm for tiles or medium mosaic of 60 x 60 cm approx. 0.10 kg/m² of 60 x 30 cm approx. 0.15 KG/M² of 30 x 30 cm approx. 0.20 kg/m² of 15 x 15 cm approx. 0.35 kg/m² of 10 x 10 cm approx. 0.50 kg/m² of 5 x 5 cm approx. 1 kg/m² the additional loss through excess material on the tiles, it is depending on the surface of which properties and working 0.05 - 0.1 kg/m² processing time (+ 20 °C/68 °F): 30 min) and A4-80 Stainless Steel Screw Material. Begehbarkeit (+ 20 °C): After approx. 90 min.
Ardex G8S Flex Grout 1-6mm 5kg, Colour: Silver Grey Sets quickly and reliably
ARDEX
£12.72
Ardex G8S Flex 1 - 6 FLEX Quick cement base for wall tile grout joint widths up to a maximum of 6 mm for both indoor and outdoor use Quick Erhärtend and resilient, flexible, water- and dirt-repellent, fine joint surface, especially good edge grip, the highest levels of durability. With Vorbeugendem protection against mould. Suitable for floor and wall mounted Heat Mat installation. Area of use for joints of: •, tiles made from porcelain stoneware, stoneware and earthenware •, glass tiles •; Natural and concrete stone plates (moisture-resistant) •; Mosaic made of glass, porcelain and ceramic material requirements: For Joint Width 3 mm, Joint Depth of 5 mm for tiles or medium mosaic of 60 x 60 cm approx. 0.10 kg/m² of 60 x 30 cm approx. 0.15 KG/M² of 30 x 30 cm approx. 0.20 kg/m² of 15 x 15 cm approx. 0.35 kg/m² of 10 x 10 cm approx. 0.50 kg/m² of 5 x 5 cm approx. 1 kg/m² the additional loss through excess material on the tiles, it is depending on the surface of which properties and working 0.05 - 0.1 kg/m² processing time (+ 20 °C/68 °F): 30 min) and A4-80 Stainless Steel Screw Material. Begehbarkeit (+ 20 °C): After approx. 90 min.
Ardex G6 Flex Grout 1-6 mm 5 kg, Colour Cement Grey for Inside and Out, Can be Worked With for Long Periods
ARDEX
£13.42
Ardex G6 Flex 1-6 grout base for joint widths from 1-6 mm for both indoor and outdoor use. Flexible, long processing time, water and dirt repellent, maximum strength. Quartz free - very fine and smooth tile surface. Very good edge hold. With fungus preventative protection. Suitable for floor and wall mounted heating. Area of use: for joints between: ceramic tiles, glass tiles, natural and concrete stone paving slabs (moisture-resistant), mosaic tiles made of glass, porcelain and ceramic. Materials required for joint width 3 mm, joint depth 5 mm, for example Central mosaic of 60 x 60 cm approximately 0.1 kg/m², of 30 x 60 cm approximately 0.15 kg/m², of 30 x 30 cm approximately 0.20 kg/m², of 15 x 15 cm approximately 0.35 kg/m², of 10 x 10 cm approximately 0.45 kg/m², of 5 x 5 cm approximately 0.90 kg/m². The additional losses due to excess material on the tiles amount to 0.05 - 0.1 kg/m², depending on their surface quality and function. Processing time (+20 °C): approximately 1.5 hours. Time until it can be walked over (+ 20 °C): after approximately 4 hours.