Stanley Centre Punch (1/8in) STA058120 Hardened and tempered square head centre punch with knurled shank and black coated finish. The knurled body provides a secure grip during use.Size. 3.2 x 100mm (1/8 x 4 in). STA058120
Type 117 Centre punches are manufactured from specially selected steel, hardened and properly tempered. They are well proportioned, nicely finished and have a knurled finger grip. The points are ground at the proper angle to give maximum service, and the tips are accurately centered. Length: 100mm (4in).Size 3 x 100mm (1/8 x 4 in)PTDSTR117C
100% brand new and high quality
Brass body with chrome plated tip
High tense spring in body
Knurled handle for sure grip
Automatically strikes surface with a powerful spring action when pressed 5" overall length with a 1/2" diameter point used to start or mark holes for drilling, screwing, and riveting.
Overall length: 5" (12.7cm)
Size for manual measurement, there may be a 0 to 1 cm error, belongs to the normal phenomenon.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
1 X Automatic Center Punch
Stanley Punch & Chisel Set 12 Piece STA418299 High quality chrome vanadium steel chisels for cutting, shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium. Cutting bolts, nuts and rivets. Punches are also made from chrome vanadium steel to precise specifications and are used for marking centre lines, hole locations and pilot drill starting points.Set of 12 contains: 10, 12, and 16mm (3/8 , ½ and 5/8 in) cold chisels.1.5, 3, 4, 5, 6 and 8mm (1/16, 1/8, 5/32, 3/16, 1/4 and 5/16) pin punches.2, 6 and 8mm (3/32, 1/4 and 5/16 in) centre punches. STA418299
This compact set replaces 24 individual drill bits in 3pc Step Drill Bits which includes one 4-12mm, one 4-20mm, and one 3-12mm. Two-fluted design can provide faster, smoother cutting. Note: Before starting drilling and screwing, the Automatic Center Punch can be used to mark hole locations. It delivers an automatic, high-impact, spring-loaded strike when pressed against wood, metal, and plastic surfaces. An adjustable cap regulates striking force. It features a heat-treated alloy steel punch with a sharp precision tip and a corrosion-resistant brass body with non-slip knurled grip. The 3 Cutters Come in the Following Sizes: 5 step drill bit: 4-12mm (4mm, 6mm, 8mm, 10mm, 12mm) 9 step drill bit: 4-20mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm) 10 step drill bit: 3-12mm (3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm) Package included: 3 x Zacro Metric Step Drill Bit 1 x Zacro Auto Center Punch Warranty: 45 days money-back & 24-month warranty. Please feel free to contact us if there's any problem. We will get you back within 24hours.
●6x Twist Drill Bit: ●Specification: ● Material: High Speed Steel ● Surface treatment: Titanium Coated ● Size: 3mm, 4mm, 5mm, 6mm, 6.5mm, 8mm ● Application: metal, wood, plastic, PVC etc ● Weight: 0.16 lb ▲Features: ● Drilling diameter from 3mm to 8mm. ● This drill bit set can NOT be used in the impact drill. ● Ideal For DIY, Home And General Building/Engineering Using. ● Mainly for thinner, low hardness of wood and soft metal hole processing. ● For high hardness stainless steel and other materials can not be processed. ●1x Automatic Center Punch : ▲Specification: ● Material: Brass ● Length: 5" ● Handle diameter: 1/2" ▲Features: ● Adjustable cap regulates striking force. ● Brass body has a deeply knurled surface for nonslip control. ● Delivers an automatic spring-driven strike when pressed against surface. ● Can be used for vehicle emergencies as a side window glass breaking tool. ● light weight, aluminum center punch is perfect for marking a variety of materials. ● Marks workpiece with a dimple, creating a starting point that prevents screws and drills from wandering. ● This multi-faceted tool stores easily in your car's console or door panel and is compact enough to carry with you.
3 pcs 1.5mm/2mm/3mm High-carbon Steel Drill Bit Set,Non Slip Center Punch Drill, Alloy Steel Metal Wood Drilling pecification: Material: High-carbon steel Color: Black and silver Length: Approx. 10cm/3.93" Head Size: 1.5mm/2mm/3mm/0.059"/0.078"/0.11" Quantity: 3pcs Features: Use of advances played a small dot on the workpiece, as a marker (such as central or circumferential line when drilling), or other point of the center line position, to facilitate processing. Suitable for proofing hole before steel, aluminum, copper and other materials drilling of drill positioning, to avoid direct drill drilling position deviation will cause slippage or damage to the drill bit. Package included: 3x Center punch Note: Please allow 1-2mm errors due to manual measurement
Material: High-speed steelShank Diameter: 6.35mm/ 1/4inch (hexagon shank)Sizes: 5 step drill bit: 4-12mm (4mm, 6mm, 8mm, 10mm, 12mm) 9 step drill bit: 4-20mm (4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm) 10 step drill bit: 3-12mm (3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm)Before starting drilling and screwing, the Automatic Center Punch can be used to mark hole locations. It delivers an automatic, high-impact, spring-loaded strike when pressed against wood, metal, and plastic surfaces. An adjustable cap regulates striking force. It features a heat-treated alloy steel punch with a sharp precision tip and a corrosion-resistant brass body with non-slip knurled grip.Package included: 3 x Step Drill Bit1 x Auto Center Punch
Professional centre punches for commercial or occasional use 3p centre punch set Colour coded for quick and efficient identification of the right size Perfect for marking metals such as steel, aluminium, copper, brass etc... Manufactured from alloy steel and heat treated for strength and durability Sets nails and brads for a smooth professional finish Rubber grip on the centre punch for comfort and grip when using Total length of the centre punches - 125mm Includes the punches 1.5mm (1/16"), 2.5mm (3/32") and 3mm (1/8") 3 colour combination depending on the size RED - 3mm (1/8") BLUE - 2.5mm (3/32") YELLOW - 1.5mm (1/16")
High-quality punch for hole punching in three sizes (with three attachments: Diameter approx. 2 mm, 3 mm and 4 mm. Particularly suitable for paper up to 230 g/m².Instructions:The three different attachments are stored in a compartment at the bottom of the handle. You open the compartment by pulling the lid with the heart logo off the punch. Remove the desired attachment and close the punch again. Now, gently twist the metal part at the bottom of the punch and pull the attachment inserted there out of the punch. Instead, insert the desired attachment into the opening and fix it by turning the metal part over again.Place a sheet of cardboard or paper on a cut-resistant work surface. Place the punch upright and press it down firmly. This creates a rotation in the punch and the hole is punched.
ANSIO Professional Leather Punch KEY FEATURES: * Professional quality, Heavy Duty Leather Punch with Comfortable grip * Supporting Sizes : 2.0mm/2.5mm/3.0mm/3.5mm/4.0mm/4.5mm * Spring swivel head for 6 different hole sizes * Multi setting suitable for making eyelets in all types of thin material * Highly accurate (Class I) measurements for professional results. * Perfect for cutting holes in leather belts, shoes, cards, canvas, soft plastics, gaskets etc and installing eyelets SPECIAL OFFER: * This price is only for limited period of time. Purchase now before this attractive offer goes away. * Register your purchase @ ansio.uk to win attractive prizes. Registration required with in 7 days of purchase USAGE INSTRUCTIONS: * Regularly clear the small storage compartment for optimal results
18 Piece Punch Set Our 18 Piece Punch set is a high quality set of 18 pin punches manufactured in CRV including a handy automatic centre punch for making centre holes for drill insertions etc.The punches have gnarled handles on both the automatic and pin punches to give extra grip and also comes in a carry bag with separate pockets for each punch. Set Includes 8 X 8" Long Pin Punches 3/8" (9.5 mm) - 5/16" (8 mm) - 1/4" (6 mm) - 3/16" (5 mm) - 5/32" (4 mm) - 1/8" (3 mm) - 3/32" (2.5 mm) - 1/16" (1.5 mm) 2 X 6" Long Pin Punches 3/8" (9.5 mm) - 5/16" (8 mm) 7 X 4" Long Pin Punches 1/4" (6 mm) - 7/32" (5.5 mm) - 3/16 (5 mm) - 5/32" (4 mm) - 1/8" (3 mm) - 3/32" (2.5 mm) - 1/16" (1.5 mm) 1 X 5" Long Automatic Centre Punch