WD40 Fast Drying Contact Cleaner 250ml
WD40D
£4.99
Specialist Fast Drying Contact Cleaner
WD-40 Contact Cleaner 400ml
WD40D
£5.99
WD40 Specialist Contact Cleaner Aerosol 400ml W/D44368 A specialist fast drying contact cleaner applied through a smart straw. Quick penetrating non-conductive formulation which is fast evaporating and leaves no residue. Cleans oil, dirt, flux residue and condensation from sensitive electronics and electrical equipment. W/D44368
Wynns 10679 500ml Electric Contact Cleaner
Wynn Oil UK
£9.21
Cleans and degreasesLeaves no residue Quick dryingSafe for ECUs
CAIG DeoxIT Faderlube F5S-H6 Precision Fader Lubricant Spray
CAIG
£26.95
The Caig Laboratories DeoxIT F5 Fader Lube Spray is a tube of 200ml fader luber spray. The DeoxIT F5 is highly efficient cleaning and lubricant designed specifically for Fader. The 5% sprays allow to rinse dust and leaves the F5 FaderLube a fine film of lubricant to obtain the smooth running of the fader. The main features of the Caig Laboratories DeoxIT F5 Fader Lube Spray include: To clean crashing and cracking Fader Devices treated can be used immediately At oxidised faders pretreatment with DeoxIT D 5 is recommended. Content 200 ml
200ml Electrical Contact Cleaner Switch Clean Aerosol Spray Can Dirt Remover (1 Pack)
Rapide Products
£4.30
Removes grease, oil and dirt from: Ignitions, precision parts, circuit boards, spark plugs and all electrical components Removes solder flux Formulated to quickly penetrate into hard-to-reach areas effectively flush away carbon deposits General-purpose cleaner and degreaser for use on sensitive electronic and electrical equipment
Comma CCL500M 500ml Contact Clean
Comma Oil & Chemicals Ltd.
£8.15
Fast acting cleaning formula to instantly remove oxidation and immediately restores the electrical current Non-corrosive properties won't harm plastic connectors and blocks Non-conductive with no residue No need to wipe away excess Includes extended nozzle for accurate application Easy application with extra tube & nozzle.
Mistral Ultrasonic PCB Cleaner & Flux Remover Concentrate 5L
Mistral
£23.99
5L Ultrasonic PCB Cleaner & Flux Remover. A specialist, non flammable, water based formulation for cleaning and removing flux from printed circuit boards and electronic components and equipment in Ultrasonic baths. In addition it safely removes contaminants including general soiling, carbon and grease etc. Effective cleaner for use on heat sinks, circuit boards, motors, chip carriers, metal housings etc. MSDS available on request.
Amtech R0285 Pen Style Scratch Brush Set, 3-Piece
Amtech
£4.31
Set includes fibre, brass and steel wire bristles;Ideal for fine detail cleaning;Retractable bristles - twist cap to extend or retract
Rapide 1427 Cleaning Spray
Woolbro Distribution Ltd
£4.90
Ambersil 6401B Amberton Contact Cleaner, 400 ml
CRC Industries UK Ltd
£11.41
Residue free contact cleaner for use on PCBs and electronic equipment.
SERVISOL 200ml SPRAY ELECTRONIC CLEANING SOLVENT NEW
Maplin
£7.73
Electronic cleaning solvent with rapid evaporation that ensures no residues. Suitable for dry contact switches and other precision instruments. Safe to use on most plastics, rubber and other delicate materials.Suitable for: Switches, connectors, etcContents 200ml (122g)
MG Chemicals Electrosolve Zero Residue Contact Cleaner, 457mL (340g) Aerosol Can
MG Chemicals
£7.95
Electrolsolve Contact Cleaner - 340G AEROSOL MG Chemicals Part No.: 409B-340GPlastic Safe. Fast Drying.
WD-40 Original Spray Can 600ml
WD40D
£6.00
WD40 WD-40 600ml Multi-use Aerosol W/D600 WD-40 is an all purpose liquid for displacing moisture, corrosion control, lubrication, cleaning and penetration. It has the ability to penetrate the minute grain boundaries on all metals. Although not essentially a lubricant, WD-40 is regularly used to lubricate all light machinery and electrical equipment.WD-40 protects metal from rust and corrosion, penetrates stuck or jammed parts, displaces moisture, and lubricates just about anything. WD-40 is also great when it comes to cleaning grease, grime, and other marks from most surfaces.WD-40 is a mixture of chemical concentrates suspended in a high grade petroleum distillate. It will not affect fabrics, rubbers or plastics. Its working temperature is between -100° F and +500° F.Thoroughly recommended to clean, preserve and protect all tools.The Five Basic Functions:CLEANS: WD-40 gets under dirt, marks and grease, making it easy to wipe them away. It also dissolves adhesives, allowing the easy removal of labels, tape, and stickersPROTECTS: WD-40 protects metal surfaces with corrosion-resistant ingredients to shield against moisture and other corrosive elementsLUBRICATES: WD-40's lubricating ingredients are widely dispersed, and hold firmly to all moving partsPENETRATES: WD-40 loosens rust-to-metal bonds and frees stuck, frozen or rusted metal partsDISPLACES MOISTURE: Because WD-40 displaces moisture, it quickly dries out electrical systems to eliminate moisture-induced short circuits (Remember to turn the power off before you spray)Did You Know ?Discover some unusual uses for WD-40 to keep your world running smoothly!Spray WD-40 onto a clean cloth and wipe to remove scuff marks off skirting boardsRid shower screens of water marks and smears with a rub down with WD-40Give piano keys a clean up with a squirt of WD-40 and a clean cloth
Silverhook SGEC1 Electrical Contact Cleaner, 500 ml
Silverhook ltd
£8.04
Electric Contact SprayA highly efficient general purpose cleaning solvent by Silverhook. Ideal for removal of stains, coatings, printing ink, oil, grease and dirt from electrical contacts.Suitable for use on electrical apparatus, installations and delicate instruments.Low toxicity, non corrosive, non chlorinated degreaser that leaves no residue and is also safe to use on most plastic or fibres.500ml aerosol
Ambro-Sol M202 Electrical Dry Contact Cleaner, Transparent
Ambro-Sol
£3.35
Specific Product For Cleaning Electrical Contacts, életroniques and èlectromagnétiques. Instantly eliminates moisture and poisseuses surface to substances such as oil, grease, oil, wax and paste, leaving the room clean and dégraissée. Non-aggressive, does not corrode plastic ambro-sol, Mark of the company gnocchi Eco Spray, to achieve a wide range of chemicals and aerosols. The company, owned by the family Ambrosini from 1990, a peaked with the production of a range of aerosol products such as lubricants for weapons and non-stick for welding) since 2007 has risen considerably increasing its catalogue. Made in Italy, the ambro-sol Brand Products are safe and meet the standards. diamwood equipment Expert.Reference: am-m202Cleaner: Electrical and Electronic fine cleaner 200 ml - M202 - ambro-solType: Contact Cleaner
Bernstein 2-163 Brass Wire Contact Cleaner
Bernstein Werkzeug GmbH
£11.80
Brass contact cleaner brush
CCL100 Contact Cleaner With Lubricant 400ml
Ambersil
£18.36
CCL 100 is a highly efficient switch and contact cleaner. It offers a combination of high purity electrical cleaning and mechanical lubrication for contacts - switches and relays. APPLICATIONS Removes: Grease Tarnish Oxidisation and other contamination from contact surfaces Leaves a protective conductive lubricating film Cuts voltage drop between contacts by increasing the surface area and reducing resistance. The residual film resists drying and the attraction of dust. Eliminates contact bounce and stops the damage which can be caused by arcing between contacts. Improves the current flow and protects against friction. Apply directly onto the components to be treated. Do not use on live electrical equipment. After spraying always leave for at least 4/5 minutes to allow dispersal of solvent vapours - before operating the equipment. TECHNICAL DATA Appearance : Clear liquid Odour : Solvent SG @ 25OC : 0.7 Pressure @ 25OC : 3.5 Bar Discharge Rate : 0.93 g/sec Temperature Range : Operational up to 150OC Solubility : Soluble in hydrocarbon solvents - insoluble in water Recommended Solvents : Aeroklene 50 or Coldklene 110 Flammability : Classified as extremely flammable under CHIP Regulations Flashpoint : Not applicable in sealed aerosol Packaging : 400ml aerosol STORAGE The product may be stored at normal ambient temperatures and has a shelf life of not less than 72 months with correct storage. Aerosols should always be stored below 50OC - away from direct heat and naked flame.
WD-40 Silicone 400ml
WD40D
£6.97
WD40 Specialist Silicone Aerosol 400ml W/D44377 A waterproof fast drying silicone lubricant formulated for high pressure performance. Eliminates sticking and binding and prevents rust and corrosion. Operating temperature -35°C to +200°CSuitable for use on metal, plastic & rubber. W/D44377