Fd workstuff

FD-Workstuff Elastic Buffers Pack of 12 Bump Stop Transparent/Self-Adhesive Furniture Buffers/Ø 16.0 mm Height 7.9 mm Protection Buffer Door Stop Rubber Bumper
FD-Workstuff
£6.65
Efficient and convenient avoid damage thanks to Aufschlagenden doors, windows, doors, two drawers, table edges and backrests. The rubber buffer can be stuck to any smooth surface - whether that's, wood, tile, plastic, wall or floors. Numerous uses, such as door stop, window, furniture buffers or drawer stop bumper displayed in your home living room, in the kitchen, in the bathroom or in the living rooms. Residue free removal of the rubber stopper when not in use, as the installation: no drill holes. The self-adhesive elastic buffers can be discreetly attached to the areas you want to protect, as they are transparent.
Pack of 120 Sanding Discs , 93 x 93 x 93 mm , Mixed Grits: 20x 40/60/80/120/180/240 for Delta Sander 6 Holes
FD-Workstuff
£10.99
  Sanding Discs: 93 x 93 x 93 Delta due to their shape those pads fit perfectly on corners and spots that are tricky to reach with round sanding discs. Sandpaper, sometimes also described as a sandpaper or emery, is an assistive For Working. The Sandpaper used to smooth rough surfaces of wood as well as for the edges . It is also suitable for greater material removal. It also works to sandpaper not only used for wood, but also for lacquer; Metal and natural stone. Aluminium Oxide is brown and has over 94% Al2O3. Its areas of application are mainly unalloyed and low-alloy steels as well as cast steel and work on iron, as well as wood, plaster board and plastics. Other sanding sheets, sanding belts ,  sanding triangles and sanding disks available in our Amazon Shop  
FD-Workstuff elastic buffers - Pack of 12 - Transparent - Diameter: 19 mm - Height: 9.5 mm - Self-adhesive
FD-Workstuff
£7.52
Efficient and practical avoidance of damage caused by knocking doors, windows, cabinet doors, table edges and chair backs. The rubber buffers can be glued to any smooth surface such as wood, tiles, plastic, walls or floors. Versatile applications as doorstops, window stoppers, furniture buffers or drawer dampers in the living room, in the kitchen, in the bathroom or in the toilet. Residue-free removal of the rubber stoppers possible when not in use, since the installation takes place without drill holes. The self-adhesive elastic buffers can be discreetly installed on the areas to be protected since they are transparent. Installation tips: As with all self-adhesive products, the substrate to which the furniture buffers are to be adhered must be free from dust, dirt and other contaminants. The buffers are coated with a very high-performance adhesive, which ensures grip on a wide variety of surfaces. To achieve the best gluing results, the buffers or dampers should be glued at least 15°C. Transparent buffers: Operating temperature: -20°C to 80°C - Processing/mounting temperature: 10°C to 80°C - Diameter: 19 mm - Height: 9.5 mm - Radius: R 7.88 - Material: polyurethane - Hardness (Shore A): 65-70 - Tolerance: +/- 0.25 mm - Pack of 12 buffers.
FD-Workstuff® pack of 16 elastic buffers, transparent, self-adhesive, diameter 19.0 mm, height 9.5 mm
FD-Workstuff
£7.61
Protects against damage caused by doors, windows, cupboard doors, table edges and chair backs. The rubber buffers can be applied to any smooth surface: wood, tiles, plastic, walls or flooring. Versatile, can be used as a door stopper, window stopper, furniture buffer or drawer buffer. For use in living rooms, kitchens, bathrooms or toilets. Should you no longer need them, the rubber stoppers can easily be removed without leaving any residue, as there is no drilling required to install them. As they are transparent, the self-adhesive elastic buffers can be discreetly applied to any areas which you want to protect. Installation tips: Furniture buffers / self-adhesive elastic buffers. As with all self-adhesive products, the surface where the furniture buffers are to be applied must be free from dust, dirt, and other impurities. The buffers are have a powerful adhesive coating which ensures good grip on a wide range of surfaces. For best results, the buffers should not be applied at temperatures below 15 °C. Transparent buffers: Operating temperature: -20 °C to 80 °C processing temperature / installation: 10 °C to 80 °C, diameter 19.0 mm, height 9.5 mm, radius R 7.88, material polyurethane, Shore Hardness (Shore A) 65-70, tolerance +/- 0.25 mm, 1 set includes 16 buffers.
48 Mixed Pack of Sanding Belts 13 x 451 mm Grain Each 8 Piece 40,60,80,120,180,240 for (e.g. Black & Decker)
FD-Workstuff
£10.50
Pack of 48 sanding belts for belt sanders Dimensions: 13 x 451 mm Mix Pack contains 8 pcs per grain 40/60/80/120/180/240 Material corundum Long service life  Resin Bonded Fabric reinforced bands High-quality professional quality for different surfaces for universal use. Many sizes available in our Amazon shop.
Pack of 60 Hook and Loop Sanding Sheets 105 x 152 mm Grit 10 Each of 40/60/80/120/180/240 for Multi Sander
FD-Workstuff
£13.98
Mixed sanding sheet set for a variety of sanding tasks on both wood and paint Quick and easy sheet change
Pack of 50 Sanding Disks Diameter 125 mm - 120 Grit - Adhesive Sanding Discs 8 Hole
FD-Workstuff
£10.03
Sanding Discs, diameter 125 mm is available in a range of grit sizes: 40, 60, 80, 100, 120, 150, 180 or 240. here a pack of 50 grinding discs with 100 Grit offered in this listing. In our shop also available in individual Abpackungen in the relevant a range of grits Description: designation: Faux Resin Bonded Long service life Top Quality Suitable for sanding wood and metal rust remover, filled, painted and areas of use: Automotive industry, workshop supplies, home, garden and patio, painter and sheets of drywall Plastic editing, woodwork and marine industrial also sanding sheets, sanding belts available
Adhesive strap M14 125 mm with Mandrel Sanding Plate for Drill
FD-Workstuff
£3.58
Support plate: - With Velcro. Colour: Red.- Plate material: Plastic. Colour: Black.- Max. revolution speed: 12500 rpm. Includes mandrel. - Dimensions: Diameter of support plate: 125 mm. Height including attachment: 35 mm.- Length of mandrel: 47 mm. Diameter of mandrel: 8 mm.- Mandrel and support plate thread: M14. Backing pad tension spanner width: 22 mm. Mandrel tension spanner width: 17 mm. - Ideal for: Drills. Angle grinders, etc.
40-Grit Sanding Paper Roll 115 mm x 10 m
FD-Workstuff
£8.99
Also known as abrasive or diminishing abrasives sanding, include those hard fabric grain which apply to material Abtrages can add ambience to your room. You is natural grain material (Flint, Quartz, Corundum, emery, Garnet, Natural Diamond) and synthetic grain material (corundum, silicon carbide, chrome oxide, Cubic Boron Nitride, diamonds). Corundum corundum is the most commonly used set in abrasives. Its important properties, hardness and strength, vary depending on his or her purity, who have already started to remaining the colour. While hardening, environmentally safe and the Sprödigkeit with a clarity grade of slightly included to the degree rise, increases the resistance due to the addition of metallic oxide and the cool Tempo in the manufacturing of the using of grinding. Aluminium Oxide is brown and has over 94% Al2O3. Its areas of application are mainly unalloyed and low-alloy steels as well as cast steel and cast iron. As well as wood, plasterboard and plastics. To Strength also allows high clamping force of the material being cut. Also sanding sheets, sanding belt, sanding triangles and sanding.
20 Cutting Discs Diameter 125 x 1.0 mm for Angle Grinders Steel Stainless Steel Flex Disc Metal
FD-Workstuff
£12.06
Product description: The cutting disc is a circular flat disc, resin bonded (normal corundum). Component of cut-off or angle grinders and used for workpiece machining. The considerably thinner cutting disk is usually used for cutting along a line, preferably for separating material sections. Cutting discs are available for various materials, such as metal, natural stone, asphalt, concrete, etc These cutting discs are suitable for all metals. Cutting discs are divided into two main groups: Resin-bonded cutting discs and diamond cutting discs. Cutting discs are not suitable for roughing. Maximum speed: 115 x 1.0 x 22.2 = Max. R.P.M. 13300 80m/s + 125 x 1.0 x 22.2 = Max. R.P.M. 12200 80m/s + 125 x 2.0 x 22.2 = Max. R.P.M. 12200 80m/s + 230 x 2.0 x 22.2 = Max. R.P.M. Max rpm: 6600, 80 m/s. Application: Thin-walled profiles, metal, sheet steel, stainless steel, especially for bodywork and tank construction. Very good service life. Cutting discs are for quicker, accurate and precise cutting. Machines: Angle grinder.
Furniture Sliders Pack of 16 Teflon PTFE Coated Self-Adhesive 25 x 25 mm Laflon Super Chair Glides
FD-Workstuff
£9.99
Furniture slider is a good servant to move the furnitures when you want to design your home again or move your furnitures, what you do is just stick it to the legs of what you want to move . It is equipped with Teflon cover to help diminishing the vibration when moving.
Pack of 100 Sanding Disks 93 x 93 x 93 mm Grain 240 for Delta Grinder 6 Holes Pack
FD-Workstuff
£9.47
  Sanding Discs: 93 x 93 x 93 Delta due to their shape those pads fit perfectly on corners and spots that are tricky to reach with round sanding discs. Sandpaper, sometimes also described as a sandpaper or emery, is an assistive For Working. The Sandpaper used to smooth rough surfaces of wood as well as for the edges . It is also suitable for greater material removal. It also works to sandpaper not only used for wood, but also for lacquer; Metal and natural stone. Aluminium Oxide is brown and has over 94% Al2O3. Its areas of application are mainly unalloyed and low-alloy steels as well as cast steel and work on iron, as well as wood, plaster board and plastics. Other sanding sheets, sanding belts ,  sanding triangles and sanding disks available in our Amazon Shop  
96 Piece Fabric Sanding Belts 13 x 457 mm Grain Each 16 x 40/60/80/120/180/240 Black and Decker Power File
FD-Workstuff
£15.99
In this offer you will find sanding belts 13 x 457 with mixed grits. Grit: 40 / 60 / 80 / 120 / 180 / 240. Material: Corundum resin bonded. Features: Long service life, top quality fabric reinforced bands. The sanding belts are semi-open scattered, which prevents quick clogging with sanding dust. Therefore, our sanding belts are particularly suitable for sanding wood, plastic, varnish and soft metals such as aluminium.
Pack of 10 x Flap Discs, 115 mm, Grit 80, Abrasive Flap Discs, INOX Sanding Mop Disc
FD-Workstuff
£14.40
Flap discs are plate-shaped sanding discs with overlapping flaps of abrasive material that is applied in a circular motion. Blue stainless steel fan discs are specifically developed to grind or process stainless steel. Brown, standard flap discs are for all other materials such as metal, wood, plastic etc. The discs are made of abrasive flaps that overlap radially. The arrangement of the flaps ensures high flexibility and consistently high grinding performance. The advantages compared to the grinding wheel are the higher abrasiveness, the low noise level and the uniform grinding pattern until the tool is completely used up. They have a relatively long service life. Also, the strain on hands and arms is significantly lower due to lower vibration and softer sanding. Flap discs are particularly suitable for coarse and intermediate sanding. They are used on all angle grinders without support plates. Examples of applications are the machining of welding seams, deburring, de-rusting and casting cleaning. We offer a range of grits, in various sizes, diameter 115 mm + 125 mm, etc.
50 Sheets Hook and Loop Sanding Sheets 105 x 152 mm Grain 60 for Multi Sander
FD-Workstuff
£9.99
Sanding sheets 105 x 152 mm for standard Multi-Sanders : Such as: Bosch PSM 200 Age, PSM 160 A, PSM 100 A, PSM 80 A, Prio, Ventaro, Skil Octo 7208 Product-Features: Sandpaper is used to smooth rough surfaces of wood , plastic , metal and universal applibable It is also suitable for material removal or softening/smoothing surfaces. It  works for all wooden, lacquer , metal and natural stone surfaces Material: Corundum Other sanding sheets, sanding belts are available in our Amazon shop
Pack of 60 Sanding Discs 150 mm Diameter I Sanding Paper with Grain 10x 40/60/80/120/180/240 Sanding Paper for Eccentric Sander 17 Hole
FD-Workstuff
£13.92
150 mm diameter random orbital sanding blades: Durable sanding discs for your orbital sander. Suitable for random orbit sanders with a diameter of 150 mm e.g. from Bosch, AEG, Atlas Copco, Black & Decker, DeWalt, Elu, Festo/Festool, Fein, Hitachi, Kress, Makita, Metabo, Skil, Wegoma Eccentric sanding discs with diameters of 150, 125 and 115 mm are available in various grits: 40, 60, 80, 100, 120, 150, 180 or 240 In our shop you will find both sanding discs as single grit but also in mixed grit pack. Description: Material: corundum. Resin bound Long service life Top quality For machining wood/metal also for removing rust, varnishes and paints. Areas of application: Automotive industry, workshop supplies, home work, garden and terrace, painters & drywall, plastics processing, woodworking and marine industry. Other sanding sheets, sanding belts, sanding triangles and sanding discs are available in our Amazon shop.
20 pieces of sanding belts 75 x 533 mm grain size 4 x 40/06/80/120/180 for belt sanders / fabric sanding belts
FD-Workstuff
£15.99
This offer includes 20 pieces of high-performance sanding belts - suitable for all common belt grinders (See list) For a high removal rate with large-area grinding work. For grinding flat wood and metal surfaces, as well as for cleaning and smoothing. Long-life belt connection and precise, clean belt run without glue residues for best surface quality. Additional grinding blades, sanding belts, grinding triangles and grinding grids are available. For the following belt grinders, For example, for FESTOOL BS 75, Bosch GBS 75, DeWalt DW430 / 431/432/433, Makita 9900/9901/9902/9903, Metabo Ba 0775, Ba E 0876/1075,
Pack of 20 flap sanding discs, mixed pack of assorted grits, 5 each of 40, 60, 80, 120 grit, by Inox
FD-Workstuff
£29.99
Product description: Flap discs are plate-shaped sanding discs with overlapping flaps of abrasive material that is applied to the work in a circular motion. Blue Inox flap discs were specifically developed to polish or work on stainless steel. Brown, standard flap discs for all other materials such as metal, wood, plastic etc. The discs are made of abrasive flaps that overlap radially. The arrangement of the flaps ensures high flexibility and consistently high grinding performance. Advantages over roughing discs are a higher aggressiveness, lower noise level and a uniform grinding pattern until completely used up. Relatively long service life. Also, the strain on hands and arms is significantly lower due to lower vibration and softer sanding. Flap discs are particularly suitable for coarse and intermediate sanding. They are attached to all angle grinders without support plates. Application examples include the processing of welds, trimming, rust removal and fettling. -