PLS NOTE: Our TIG 200 is IGBT tech, not MOSFET. IGBT machine is far superior and more stable than MOSFET machine. IGBT tech is is more superior than MOSFT tech in the following aspects: Peak current capabilities, forward resistance and temperature drift, switching speeds and response time, logic level switching and isolation, gate capacitance oscillation, cost, effectiveness at higher voltages, heat dissipation requirements Features: 200amp TIG Welding Output @ 60% duty cycle 180amp MMA (Arc) Welding Output @60% duty cycle 220V input single phase Light weight and compact design High Frequency start L.E.D amperage display Fan cooling system Industrial quality metal chassis ,Ideal for maintenance and custom fabrication jobs 85% efficiency. IP21 protection class. CE marked and RoHS compliant Specification: Model: TIG-200G Function: TIG/MMA Function Rated Input Voltage (V): AC 220 + - 15%, 50/60Hz Rated Input Power (KVA): 7.5 Rated Input Current (A): 34 Rated Output: 200A/18V(TIG), 180A/27.2V（MMA） Output Current (A): 10-200(TIG),10-180(MMA) TIG thickness: 0.8-8mm, MMA Electrodes are 1.6/2.4/3.2 mm. No-load Voltage (V): 72 + - 5 Rated Duty Cycle (%): 60% Efficiency (%): 70 Power Factor: 0.93 Protection Grade: IP21 Insulation Grade: F Dimension (mm): 348*140*265 Net Weight (KG): 10 Packing List: TIG/MMA welder x 1 TIG touch cablex4meters TIG torch × 1set1.2m ground clamp and cable 1.8m electrode holder and cable Cable jointx2pcs Inner hexagon spanner x 1pcsCeramic nozzle x 3 Needle holder x 3
Machine Features: TIG & MMA(ARC/STICK) welding 2 in 1 Digital Control Panel Design enables more accurate and easier operating TIG welding with HF Start - Easy ARC starting and improvers tungsten life LED amperage display CE approved Compact portable design and light weight Pre-Blow and Gas Delay can be adjustable MMA welding with Auto hot-start, ARC Force and Anti-stick technology Usable Electrode 1.6 - 4.0mm for MMA welding Suitable for welding different metals such as steel, stainless steel, nickel alloys, copper, brass and bronze etc. (not suitable for welding aluminium as this is DC TIG/MMA welder not AC/DC TIG welder) SPECIFICATIONS: 200A TIG Welding Output @ 60% duty cycle 180amp MMA (Arc) Welding Output @60% duty cycle 240V input single phase High Frequency start Fan cooling system Chassis material: Industrial grade metal Net Weight: 6kg Dimensions (mm) 380x140x270Package Content: TIG-200G TIG/MMA DC inverter Welder, 2.5M TIG Torch, Earth Lead, MMA Lead, Mains Cable (doesn't wire a plug), Instruction manual, Steel hammer, Welding face mask, Torch Consumables Kit including a tungsten electrode. THIS WELDER DOES NOT COME WITH A PLUG. 12 months UK warranty for free repair or replacement
This professional HF TIG Welder is ideal for maintenance, and for works to weld steel, stainless steel or copper.
With advanced INVERTER technology, the TIG DC 168 is microprocessor controlled and features a digital control panel for easy and accurate setting of welding parameters.
Memory capability allows you to save up to 5 chosen preset programs.
- 2 methods LIFT in specific conditions
HF without contact
- «Adjust Ideal Position»
This system assists the positioning of the electrode before the current increases to it maximum. A very low current is supplied (10A), acting like a « beam of light »
(this feature is available in 4T and 4Tlog mode).
- 2 Times
- 4 Times
- 4 Times "LOG": Enables switching between 2 operator preset welding intensities (hot current and cold current) by a short press on the trigger.
3 TIG PROCESSES
- "Normal" TIG: Pre-Gas/ Up slope/ Current (1 or 2 possible current settings in 4Tlog mode)/ Post-Gas / Down slope.
- Pulse TIG: Easy Pulse mode: the operator sets the average welding intensity. The unit will manage automatically the frequency and the hot and cold current.
Normal mode: the operator adjusts the hot and cold current and the frequency (0.2 HZ to 20 HZ).
- Spot TIG: Enables the user to prepare parts with spot welding.
Coated Electrode for welding with electronic equipment and TIG. Priming of professional bow without contact mediantearco pilot of high frequency.Features Suitable for all type of maintenance and construction work in the required Maximum Quality of welding ysencillez of use.Benefits unmatched in its level of price: 170 to 60%, Voltage in empty = 78 vdcfácil realization of welding, even for inexperienced users, thanks to intelligent control st welding queincluye advantages, arc force, hot start Anti Stick, down time and post time to optimize the initial priming the arc, improve your stability during the final outcome, to prevent the electrode from sticking by evil handling and control of TIG process.Equipment completely prepared for safe use with generators stabilized, supporting surges of + 17%.Solid construction Specifications exceeded European 2002/95/CE and EN/IEC 60974.Maximum quality components, including switches IGBT 600 V, modulator PWM uc3846 of high range.Ferrite toroidal transformer and components of brands (Philips, Motorola, IXYS) of maximum reliability.Maximum power density: The lightest equipment in its category, only 5 kg of weight.Control down time for adjust the time of the ramp slope of completion of the bow.Post time control to adjust the output time of argon after completing the bow.Content of pure copper power cable: 2.2 mCable porta-electrodos with pure copper clamp: 2.5 mCable mass of pure copper with clips: 2 mantorcha Pure Copper TIG HF: 2.5 mdatos Technical intensity (to, X = 60%): 170electrodo (mm): 4peso (kg): 5 Power (V): 230 generator (kVA): 5dimensiones (cm): 32/42 x 14 x 30
This SIP Weldmate inverter welder features high frequency TIG, ARC, and Plasma capabilities. Portable and lightweight, all features are packed into one unit. This machine is convenient and flexible, and is capable of cutting up to 10mm in mild steel and 12mm in plasma. Included with this heavy duty welder is a regulator, 4 meter TIG Torch (SR17), 4 meter air cooled plasma torch, and ARC electrode holder.
Power: 230v (16amp) supply
Cutting capacity: 10mm mild steel and 12mm plasma
Rod diameter: 1.6-4.0mm
TIG output duty cycle: 160amp @ 60%
ARC output duty cycle: 150amp @ 60%
Plasma output duty cycle: 33amp @ 60%
Rated output HF Tig Welder: 15-160amp
Rated output Arc Welder: 15-150amp
Rated output Plasma Cutter: 15-150amp
Packaged Dimensions: H 47 x W 39 x D 69 cm
The estimated delivery time will be 4 to 7 business days from the time of order.
Additional day(s) transit may be required for remote areas.
Public and Regional holidays may affect delivery lead times.
Delivery times may vary in the event of adverse weather conditions.
Please note that we are unable to ship to the Channel Islands, Post Office boxes and BFPO.
Specification Model Number:CT312 Rated output voltage :110/220V±15% Weight :28.66lb Pulse Frequency : 50/60Hz Rated Duty Cycle : 60 % Dimensions :340*160*240mm Technology : Latest invert technology Application TIG CUT MMA Input current 10 15.87 14.7 Output current 15 92 25 Current range 10-120 10-30 10-120 Accessory TIG Torch 2.5M Cutting Torch (PT31) 2.5M MMA Clamp & Cable 1.5M Ground Clamp & Cable 1.5M TIG Cap (Short) TIG Cap (Long) Air Regulator 3pcs x Plasma Tip 3pcs x Plasma Electrode 3pcs x Plasma Shield Cup 3pcs x TIG Collet 3pcs x TIG Nozzle 3pcs x Gas RingNO power plug
Introducing the RÖHR HP-200PP welding machineUsing the latest inverter technology to dramatically reduce overall footprint, this welder is compact whilst maintaining the features and control of some of its bigger brothers. As well as size, inverters dramatically reduce the power required to weld, increasing efficiency by 30%, whilst producing a constant power supply for a more stable welding arc. This TIG welding machine is easy for arc initiation and features: arc initiation current, arc stop current, welding current, basic value current, current ascending time, current descending time, gas delay time, continuous adjustment. Also, pulse frequency and pulse duty can also be adjusted independently. It has the characteristics of automatic control of arc initiation, arc stop and stable arc, which yield the best results for shape and inner quality of the welding surface. It can weld stainless steel, carbon steel, copper, other coloured metal, and also for traditional electric welding.SPECIFICATIONSStick Weld Clamp - 2mEarthing Clamp - 2mElectric Cord - 1.5mTIG Heatproof Weld Gun Cord - 4m (heatproof)Collets 2.0mm, 2.4mm, 3.2mmFrequency (HZ): 50/60Power Voltage (V): Single Phase AC 230V±15%Input Current (A): 32Output Current (A): 20-200Duty Cycle (%): 60No-Load Voltage (V): 56Efficiency (%): 85Power Factor: 0.73Insulation Grade: FHousing Protection Grade: IP21IN THE BOX1 x Welder Unit1 x Stick-Weld Armature1 x TIG-Weld Armature1 x Earthing Clamp1 x Welding Mask & Glass1 x Cleaning Brush3 x Ceramic Cups, 3 x Brass Collets, 1 x Blue Collar1 x Black Gun Cap1 x Accessory Bag1 x User Manual
TIG inverter welders, high frequency HF and MMA in continuous current (DC) for use in various materials (steel, inox). Equipped with TIG press. TIG Welding Adjustable Parameters: Welding Current & Current Downflow Ramp Regulation, 2 Stroke / 4 Stroke Operation Selector. Post Flow, Down Slope (Postages) Suitable for MMA welding for all types of electrodes with ARC FORCE device, HOT START with protection. Anti Stick. Equipped with TIG 3 m torch. Professional series.
Fan-cooled AC/DC power supply for pulse TIG and MMA welding applications. Suitable for welding aluminium, magnesium, stainless steel, steel, copper, nickel and titanium. TIG cycle includes post gas and current down-slope regulation. Features regulated high frequency (HF) push button arc that prevents having to touch the workpiece to start, keeping the tip in good condition for longer. Includes connector for foot pedal when more control is required. Foot pedal available as an optional accessory (Model No. TIG200HFACDCF). Model No. TIG200HFACDC
TIG inverter welder (HF and LIFT high frequency trigger), TIG PULSATO and MMA in DC and AC (AC/DC), controlled by microprocessor. Use with different types of materials such as steel, stainless steel, aluminium, titanium, copper, nickel, magnesium and their alloys. Features: - TIG adjustments: post gas, rampa/time down current, bi-level, balance - MMA adjustments: arc force in operation of the type of electrode in use - 2/4 stroke operation - hot started anti-stick devices - ready for remote control - electrodes in MMA: rutilis, basic, stainless and cast iron - thermostatic protections, overvoltage, undervoltage, over-current. Complete with TIG welding accessories.
MACHINE FEATURES: PLASMA CUT & TIG & MMA/ARC/STICK DC Inverter welder 3 IN 1 Digital Control Panel Design enables more accurate and easier operating ARC Start Method: HF Contact(CUT), HF(TIG), Scratch(MMA) 2T/4T modes are available on CUT & TIG UP-Slope and DOWN-Slope can be adjusted in range 0-5s on TIG Auto hot-start, ARC Force and Anti-stick technology on MMA Clean cut is up to 12mm, Severance cut is up to 16mm on mild steel Usable electrode 1.6 - 4.0mm for MMA welding IGBT technology inverter, CE approved Compact portable design and light weight Comes with a 4m CUT torch and a 4m TIG torch SPECIFICATIONS: Power Voltage (V): AC220V+/-15% Single phase Rated Input Capacity (kVA): 7(CUT), 5(TIG), 7(MMA) No-load Voltage (V): 210 (CUT), 64(TIG), 64(MMA) Current Range (A): 20-50 (CUT), 5-200(TIG), 20-200(MMA) Rated Output Voltage (V) 100 (CUT), 18(TIG), 27(MMA) Rated Duty Cycle (%): 40 Efficiency (%): 70 Insulation Class: F. Protection Class: IP21 Weight (kg): 14 Measurements (mm): 456 x 177 x 354 PACKAGE CONTENT: CT-520D PLASMA CUTTER/TIG/MMA DC inverter Welder, 4M CUT Torch, 4M TIG Torch, Earth Lead, MMA lead, Instruction manual, Air regulator and Torch Consumables Kit etc. THIS WELDER DOES NOT COME WITH A PLUG. 12 Months UK Warranty for free repair or replacement
200AMP HF Start TIG/MMA 2 in 1 DC Inverter Welder Portable Welder Welding Machine Introduction: The TIG 200 Inverter Welding Machine features top quality. DC welding generator with high power, low power consumption, low weight thanks to state-of-the-art inverter technology. For electrode and TIG welding. The powerful and effective inverter allows a duty cycle of 60% at 200 A welding current. The HF high-frequency ignition ignites the arc during TIG welding without touching the workpiece. Specification: Type: TIG-200C Color: Blue Input voltage: 240 V Frequency: 50/60 Hz Output current: 200 A Current adjust range(MMA/TIG): 20-200 A No-load voltage: 42 V Rated working voltage: 18 V No-load consumption: 40 W High Frequency start L.E.D amperage display Power factor: 0.93 Rated duty cycle: 60% Efficiency: 85% Insulation class: F Protection class: IP21 WIG electrodes diameter: 1-3.2 mm (0.04-0.13 inch) MMA electrodes diameter: 1-4 mm (0.04-0.16 inch) Package size: 45 x 34 x 27 cm(17.7 x 13.4 x 10.6 inch) Gross weight: 10.14 kg (22.4 lb) Package Contents: 1 x TIG-200 Inverter Welding Machine 1 x 2.5 m Cable With Welding Tongs 1 x 2.0 m Cable With Grounding Clip 1 x Standard 5 m QQ150 Argon Torch 1 x Product Manual
TELWIN Technology Tig 222 AC/DC-HF/Lift VRD Inverter welder for welding with DC and AC current. Weld using TIG with HF and lift ignition, TIG pulse or MMA welding steel, stainless steel, aluminium, titanium, copper, nickel, magnesium and its alloys. Highlights: Variable adjustment of welding parameters: gas upstream / downstream time, power up/down, spot time, pulse rate and AC arc frequency. Controlled AC/DC with TIG, PULSE WIG (HF and LIFT ignition) and MMA method EasyPulse: Automatic pulse mode, where only the main current is prescribed. Basic current, pulse rate and balance are fully automatic ThinSpot: control technology allows for fast, precise spot welding. MMA technology: hot start, arc force and anti-stick VRD: The V oltage R eduction D evice reduces the idle voltage to a safe level Remote control. Accessories sold separately Technical data: Supply voltage: 230 V Phases: 1 Power frequency: 50 - 60 Hz Mains fuse: 20A Control range (min - max): 5 - 200 A Operating time (at 40 °C): 24% @ 200 A, 60% @ 115 A Electrodes used in DC: 1.6 - 4.0 mm No Load Voltage: 100V Power consumption 60% - Max: 3 - 5.5 kVA Power factor: 0.6 cos phi. Protection class: IP 23 Dimensions (L x W x H): 430 x 170 x 340 mm Weight: Approx. 16.4 kg TÜV-tested Box contents: TELWIN Technology Tig 222 AC/DC-HF/Lift Welding Device 4.0 m hose pack with TIG burner ST 26 3 m ground cable 25 mm2 Dinse 50 Pressure regulator with two pressure gauges Connection kit for gas.
Introducing the RÖHR HP-160L welding machineUsing the latest inverter technology to dramatically reduce overall footprint, this welder is compact whilst maintaining the features and control of some of its bigger brothers. As well as size, inverters dramatically reduce the power required to weld, increasing efficiency by 30%, whilst producing a constant power supply for a more stable welding arc. This TIG welding machine is easy for arc initiation and features: arc initiation current, arc stop current, welding current, basic value current, current ascending time, current descending time, gas delay time, continuous adjustment. Also, pulse frequency and pulse duty can also be adjusted independently. It has the characteristics of automatic control of arc initiation, arc stop and stable arc, which yield the best results for shape and inner quality of the welding surface.It can weld stainless steel, carbon steel, copper, other coloured metal and also for traditional electric weldingSPECIFICATIONS Stick Weld Clamp - 2mEarthing Clamp - 2mElectric Cord - 1.5mTIG Heatproof Weld Gun Cord - 4m (heatproof)Collets 1.6mm, 2.0mm, 2.4mmFrequency (HZ): 50/60Power Voltage (V): Single Phase AC 230V±15%Input Current (A): 24Output Current (A): 20-160Duty Cycle (%): 60No-Load Voltage (V): 56Efficiency (%): 85Power Factor: 0.73Insulation Grade: FHousing Protection Grade: IP21IN THE BOX1 x Welder Unit1 x Stick-Weld Armature1 x TIG-Weld Armature1 x Earthing Clamp1 x Welding Mask & Glass1 x Cleaning Brush3 x Ceramic Cups, 3 x Brass Collets, 1 x Blue Collar1 x Black Gun Cap1 x Accessory Bag1 x User Manual
Professional quality, portable 200 amp TIG/MMA pulse AC/DC inverter welder kit. Supplied complete with mask, brush, earth clamp, and electrode holder. Manufactured to a high standard for superior strength and durability. High quality, lightweight, energy saving design. Automatic protection against excess voltage or current. Highly portable and easy to transport. CE / GS marked and RoHS compliant. Supplied complete as shown. Please note the colour of this item may vary subject to availability. Please follow all safety instructions when using this product.Please note this item is supplied without a plug and will require a 16amp power supply
Introducing the Röhr WSME-200 welding machineAn ideal solution to the majority of welding needs offering precision and control where it matters most. Simple to use, from experienced pros to first-timers. This uses the latest rectifier technology to dramatically reduce overall footprint and increase performance.Inverters dramatically reduce the power required to weld, increasing efficiency by 30%, whilst producing a constant power supply for a more stable welding arc. With DC pulse arc it can produce an excellent quality of weld from thin plate to different metals and plates of different thickness. With AC arc it can ensure an excellent weld quality with the adaption of its double inverter technology and its characteristics of pure square wave output, good arc force, its wide cleaning range and continuous arc with low current.It can weld stainless steel, carbon steel, copper, other colour metal and also can use for traditional electric welding, especially suitable for welding products made of aluminium or aluminium alloy.SPECIFICATIONSStick Weld Clamp - 2.5mEarthing Clamp - 2.5mElectric Cord - 1.5mMIG Weld Gun Cord - 4.0m (heatproof)Collets 1 x 2.0mm 1 x 2.4mm, 1 x 3.2mmFrequency (HZ): 50/60Power Voltage (V): Single Phase AC 240V±15%Input Current (A): 21Output Current (A): 20-200Duty Cycle (%): 60No-Load Voltage (V): 56Efficiency (%): 85Power Factor: 0.93AC Pulse Duty (%): 20-80Arc Current (A): 5-200Insulation Grade: FHousing Protection Grade: IP21IN THE BOX1 x Welder Unit1 x Stick-Weld Armature1 x TIG-Weld Armature1 x Earthing Clamp1 x Welding Mask & Glass1 x Cleaning Brush3 x Ceramic Cups, 3 x Brass Collets, 1 x Blue Collar1 x Black Gun Cap1 x Accessory Bag1 x User Manual
An intelligent single-phase, portable, fan-cooled and microprocessor-controlled inverter TIG welder, which provides direct or alternating current AC/DC output. With HF or LIFT striking modes, slopedown, bi-level manual pulseamp remote control option.
TIG welding (Tungsten Inert Gas) is a welding process whereby the welding arc is formed between a non-consumable tungsten electrode and base material. The shielding gas (most common of which is Argon) is fed through the TIG torch to shield the electrode and molten weld pool. The Hawk Tools AC/DC TIG welder series is suitable for welding various metallic materials including aluminium, aluminium alloy, carbon steel, stainless steel, copper, titanium, etc.Professional quality, portable 200 amp TIG welder kit.High quality square wave power supply creates a stable arc without the need for arc stabilisation.Foot pedal control connection designed for flexible ease of operation.Supplied complete with mask, brush, earth clamp, and welding torch.Manufactured to a high standard for superior strength and durability.Built in carry-handles.Highly portable and easy to transport.Built-in protection alarm system designed to prevent overheating, excess current / voltage, low voltage, etc.Lightweight and compact design.60% duty cycle.Output current range from 10-200 amps.80% efficiency.High duty cycle for continuous operation without interruption at higher current.CE marked and RoHS compliant.Brand new.Supplied complete as shown.Please note the colour of this item may vary subject to availability.Please follow all safety instructions when using this product.Please note this item is supplied without a plug and will require a 16amp power supplyKit Includes:AC/DC TIG-200 Hawk Tools Welding MachineBrushEarth ClampWelding Torch