Einhell EINTCSS405E TC-SS 405E Scroll Saw 120W 240V 45 Degree TiltThe Einhell TC-SS 405E 80 Watt Scroll Saw is ideal for precise, complicated work on wood, plastic, aluminium, plexi glass and gypsum. With its stable parallel arm, it is able to make easy, accurate cuts, including circles and round forms.The scroll saw has a blower device to remove dust particles from the saw blade. The transparent saw blade protection offers optimal security, whilst still allowing excellent visibility. For mitre cuts, the work bench can be adjusted to up to 45°.Specification of the EINTCSS405EInput Power: 120 Watt.No Load Speed: 400 - 1,600/min.Throat Depth: 406mm.Max Cutting Depth: 45/90°: 20/52mm.Table Size: 408 x 250mm, Table Tilt: 0-45°.Weight: 9kg.
Ferm Power Scroll Saw Scroll saw with mitre guide for precise working- professional dust blowing system for a clean working surface- quick release function for easy saw blade exchange- Working table adjustable from 0 - 45 degrees. Model number FFZ-400R. Technical information Mains voltage 230 V- Frequency 50 Hz- Power input 90W- No load speed 1440 /min- Mitre cut adjustment 0 - 45degrees- Max. saw capacity at 90 degrees- 40 mm Maximum saw capacity at 45 degrees- 10 mm Maximum cutting length 400 mm. 3 year warranty. Product Code: SSM1005Weight:14.5 Kg
DREMEL® Moto-Saw (MS20-1/5) The Dremel Moto-Saw is a compact and easy-to-use scroll saw for making detailed cuts in different materials. Thanks to its detachable fretsaw, it can be used not only stationary but in-hand anywhere. This user friendly scroll saw is not only easy to store and set-up, but also easy to operate. Product Description Easy to use: quick accessory change combined with effortless set-up and storage due to its compact size. Dual functioning: stationary mode for precision work and handheld mode for larger work pieces. Reduced vibration: hold down foot. Precise straight cuts: guide rails and parallel guide to assist cutting up to 18 mm. Match speed to project at hand: Full variable speed control (1.500-2.250 RPM). Technical Specification Rated power input 70 W Voltage 220 - 240 V Weight 1,10 kg Length 40 cm No load speed 1.500 - 2.250 1/min Sound pressure 77,5 dB(A) Sound power 88,5 dB(A) Vibration 9,3 m/s² Included in Box Dremel Moto-Saw 2 x Fine Wood Cutting Saw Blade (MS52) Parallel Guide attachment Sturdy and spacious storage case 2 x General Purpose Wood Cutting Saw Blade (MS51) 1 x Metal Cutting Saw Blade (MS53) Instruction manual
An ideal addition to any bench top workshop, this scroll saw has the right features for the beginning and intermediate woodworker to make intricate cuts and patterns.About ScheppachWith scheppach, quality, innovation, versatility and environment cannot be separated. As a specialist for woodworking machines, we attach great importance to the quality and functionality of our products. Alone in the past few years we have applied for 31 patents and introduced to the market 150 new developments. The certification according to DIN EN ISO 9001-2008 confirms the high quality standard.scheppach machines are being tested for quality, but also everything needed for production is being strictly monitored. Features -Cutting height / depth: 57 / 406 mm-Saw blade length 127 mm-Table adjustment +45°-Variable speed 500 1700 rpm-LED light comes standard-Accepts pin blades and plain end blades-Quick release blade tension knob allows quick and easy blade change-Nearly vibration free, allowing you to work with precision for professional looking results-Blower keeps the working area free of dust-Tool storage box
Lumberjack SS405 Bench Top Scroll Saw Powered by an induction 90W motor boasting a 405mm throat capacity, complete with its own inbuilt work light, air blower, adjustable cast iron base and variable speed makes this scroll saw the one to beat! Built In Work Light Dust Port Cast Iron Base Cutting Site Air Blower Table Angle Adjustment Pinned/Pin-less Blades Motor- 90w-230w Variable Blade Speed- 550rpm-1650rpm Table Tilt- 0-45 degrees Dimensions- 370 x 235 x 560mm Saw Blade Lenght- 127mm Working Depth- 405mm Weight- 12kg
Sturdy construction: Vibration-reducing base housing of cast steel, neatly CNC-processed and powder-coated. For stability and working without vibrations. Extremely light magnesium saw arms reduce the weight of the mass moved by approx. 40% compared to die-cast aluminium. For smooth running and clean cuts. 460mm throat! Magnesium saw arms precisely mounted on bearings: Extremely light and firm with a slender-shaped cutting area for an unobstructed view of the work piece. Chip blowing device with adjustable nozzle. Additional suction connection to connect a vacuum cleaner. Large saw table made of die-cast aluminium (400 x 250mm). For easier saw blade replacement, it can be unlocked and pushed back (see description at top right). Regular scroll saw blades are fastened by saw blade holders with high clamping force: This ensures true alignment in the saw arm! The machine has also been prepared for saw blades with pin ends that are used without blade holders. Extremely important for these types of scroll saws: A handy adjusting knob enables sensitive clamping of the saw blades! Table angle adjustment possible from 5° to 50°. Cutting performance in wood 60mm, in non-ferrous metals (depending on type) 10 - 15mm. Also easily cuts Plexiglas, glass fibre reinforced plastic, foam, rubber, leather or cork. Includes 5 each coarse and fine saw blades. Weight & dimensions -Weight: 20 kg -Width: 320 mm -Depth: 580 mm -Height: 300 mm Power -AC input voltage: 220-240 -Power: 205 W Technical details -Number of speeds: 2
"Scroll Saw Woodworking & Crafts" magazine is proud to present this collection of 60 of the best projects for both scroll saw beginners and those with experience. Readers will find this book a great reference not only for its detailed patterns, but for its tips, techniques, expert step-by-step instructions and crisp photos all guaranteed to help them master the projects featured or to spur their own creativity. From simple basic patterns for beginners to detailed keepsake portraits and beautiful compound cut pieces, the inspiration is abundant by the designs of contributors, such as John A., Nelson, Gary MacKay, Ron Brown, Kathy Wise, and Rick Hutcheson. This book is broken down by category so that the type of project can be easily found, whether it is intarsia and segmentation, fretwork, or inlays and relief.
Ideal for both hobbyists and professional users who require precise and accurate cuts in wood up to 50mm thick, this robust machine features a cast iron base and table for stability, rigidity and accuracy. Download Product Manual 85 Watts, 230V motor 400mm throat depth with 50mm cutting height Air blower fitted as standard. It utilises the reciprocating action of the saw to keep the cutting area free from dust & debris Precision machined table tilts from 0 to 45º to allow accurate angle cutting Fast easy blade tensioning Adjustable safety guard & on / off switch with protective dust cover 10, 15 & 20 T.P.I. Blades (packs of ten) available
Supplied with 5mm wide 6tpi blade, mitre gauge, rip fence, push stick and dust extraction outlet. Facilities include a superior cast and ground aluminium table with 0-45° tilt capacity allowing angled cutting, ripping, mitre and bevel cutting. Fitted with a cable and approved plug. Display carton.
This 535mm(21") scroll saw is the mid sized model from a range of three with some really different features not found on any other machine. It is constructed mainly from plate steel including a 7mm heavy gauge steel table with an epoxy painted surface. Two unique features make this machine stand out from any other. Firstly, the blade actuating arms are very short, driven by a lever and rod mechanism. This gives very high control of the blade plus exceptionally low vibration. Secondly, the whole arm assembly tilts 45° from the vertical right and 35° left, leaving the table horizontal. This allows much better control of the work, due to greater visibility and being able to work at a natural position. You are not fighting gravity or bending your wrists into awkward positions. This machine is not short of other features, having a variable speed control system giving from 400-1,500 strokes per minute. Upgraded with the PEGAS "Blade Chuck" blade clamps which are much lighter, reducing vibration which reduces stress on the machine. Blade changing is easy and tool free, with two hand clamps and a quick release lever. An air blower and work hold down are provided. Plus there is efficient dust collection when connected to a suitable fine dust extractor. You are recommended to permanently mount the machine onto your workbench or to one of the dedicated stands available as an option. Using unpinned blades means there is a large selection of blades available or you can use 150mm lengths of 1/4" bandsaw blade, ideal for cutting thicker materials. Supplied with an assortment pack of Swiss made PEGAS blades. This is a serious machine for craft or joinery work, not the same as any other. This machine was previously known as the EX-21.